Are the F740 devices noisy?
The CryoCube F740 has an improved sound level of 47.8 dB. The "i" versions provide you some silence level of down to 41.3 dB. These "i" versions are equipped with a sound-reduction-system. Based on a different air filter position at the front of the freezer, the air flow is now guided in a more silent way towards the ventilation system. At the backside of the freezer, a special compartment further reduces the sound level. Relax when working near a CryoCube F740i.
Which racking systems and accessories are available ?
Eppendorf offers a broad range of Stainless steel and Aluminium Racks for sample storage. In addition Eppendorf Storage Boxes of polypropylene are available in 2"", 2.5"", 3"",4"" and 5"" sizes for standard Cryovessels, SafeLock tubes, 5ml Eppendorf tubes, 15 and 50 ml conical tubes, PCR plates, Deepwell plates and MTPs.
For maximum capacities in our new F740 series , we offer MAX racks. For more Information please take a look in the brochures "Protect what matters
" or "Store More
Where can I find license information about software components of CryoCube F70hi?
The software included in the CryoCube F740hii contains copyrighted software that is licensed under the GPL. A copy of that license is included in the settings of the device under “About this CryoCube F740hi”. You may obtain the complete corresponding source code from us for a period of three years after our last shipment of this product. Please direct your request to firstname.lastname@example.org. This offer is valid to anyone in receipt of this information.
Can the inner doors of CryoCube F740hi be removed?
Yes this is possible. The inner doors can easily be removed for access to compartments during defrosting and cleaning.
Is the Eppendorf CryoCube F740h connectable to VisioNize Lab Suite?
Yes, the CryoCube F740h (box enabled) can be connected to VisioNize Lab Suite via a Gateway box. It enables remote monitoring and status checks, alert notifications form anywhere.
What are the height requirements when placing the CryoCube F101h under a work bench?
The external dimensions are 83 x 90 x 56.6 cm (HxDxB).
The work bench should allow for a clearence of at least 85 cm, measured from the bottom edge of the bench to the bottom floor.
What kind of cooling liquids are used for the CryoCube F101h?
The cooling system operates with "green" cooling liquids (R290/ R170) only.
In 2014, the European Union announced a ban of all non-hydrocarbon-liquids (EU_517/2014) until 2020 (also known as "F-gas regulation"). Hydrocarbons are also known as green or natural gases. The two major representatives are propane and ethane (known as R290 and R170). This ban includes all cooling devices except instruments for temperatures below -50°C. Based on this exception, ULT freezers of -86°C can continue to run with HFCs. Still, it makes sense to replace the HFC cooling liquids also for ULTs as global warming needs to be slowed down.
What kind of racks are available for CryoCube F101h?
CryoCube F101h freezers have 2 internal compartments, each of which can hold three racks.
All rack options for different vessel formats are listed in the brochure "Store More".
Is the CryoCube F101h provided with inner doors?
The chamber is divided by 2 inner doors sealing the two internal compartments.
The inner doors are equipped with seals to minimize the loss of cold when opening.
What material is used for the inner chamber of the CryoCube F101h?
The inner chamber of CryoCube F101h, like all other Eppendorf ultra-low temperature freezers, is made of stainless steel and is therefore resistant to a large number of disinfectants, scratches and rust.
Can the CryoCube F101h be locked with a key?
Yes, a lock is integrated in the door handle of the CryoCube F101h. Two keys are available.
Where do I find the control panel of the CryoCube F101h?
The control panel of the CryoCube F101h is located in the upper right corner on front of the device.
What kind of insulation is used for the CryoCube F101h?
The Freezer is insulated using polyurethane foam (PU) as well as vacuum insulation panels. This results in a low energy consumption of the F101h and leads to long warm-up time during power failure.
What means "Pull down time"?
This is the time required for a unit to pull down from Room temperature to -80 °C. This usually takes between 3-4 hours for an Eppendorf freezer. The pull down data for Eppendorf freezers can be found in our familiy brochure "Pure. Ultracold".
How many boxes fit in an Eppendorf CryoCube F440n / F440h ?
In one of the five compartments 4 racks will fit. The storage capacity is 20 racks per freezer, 16 boxes per rack and in total 320 x 2" boxes per freezer.
What is the design of the inner chamber of the CryoCube F440h and F440n ?
The chamber of CryoCube F440h and F440n is composed of 5 compartments with 5 inner doors. It is made of stainless steel, which is easy to clean and disinfect.
What are the safety features of the CryoCube F440h/n ?
The handle can be locked with an integrated lock and additional padlock. A lockable metal plate protects the main and battery switches from accidental disconnection. All settings (alarms, delays and setpoints) can be protected by an individual code.
What is the pull down time, i.e. the time it takes for the CryoCube F440h/n (230 V/115V) to cool down from ambient to -80°C ?
The pull-down time for the CryoCube F440h is 215 min for 230V and 180 min for 115V.
The pull-down time for the F440n is 3h 35 min for the 230 V variant and 3h for 115 V.
The insulation of the CryoCube F440h is composed of environmental friendly polyurethane foam and vacuum insulation panels. The CryoCube F440n is insulated exclusively with PU foam.
How does the insulation of the CryoCube F440h differ from that of the CryoCube F440n ?
Are the racks of the U410 or U410HEF compatible with the CryoCube F440h/n ?
Yes, the racks of the previous models fit into the CryoCube F440h/n. For more information, find the brochure "Store More" on our website.