epMotion® 5073l
Convenient PC touch controller for easy programming
New innovative functions
Et vous pouvez désormais réutiliser les pointes grâce à une nouvelle option logicielle.
Automated Liquid Handling
Simple and fast operation via software assistants
Convenient PC touch controller for easy programming
MultiCon_2021
epMotion 5075
Institute of Biotechnology, Prague, Czech
Esteve, Barcelona, Spain
Institute for Pathology, TU Munich, Germany
Product Information
The 5073l versions are with 6 deck positions, gripper option and automatic exchange of 3 tools very flexible automated liquid handling systems that allow its use as open platforms for diverse liquid handling tasks. They are controlled by EasyCon tablet or MultiCon PC and can be configured with CleanCap and 1 thermal module.You will find additional download material at the bottom of this page
Sets (1)
Accessories (80)
epServices (16)
1 Sets
Catalog no.
5073000590
|
Show more Products
Product Information
Technical Data
Applications
Features
The epMotion 5073l is a flexible system for automating time-consuming and complex pipetting procedures with the epBlue™ software, making routine Liquid Handling tasks easier than ever. The liquid handling robot enables more precise, reproducible and fully standardized pipetting, making your workplace more ergonomic and safer.
Dispensing Tools
The epMotion workstations can automatically change the tools connected to its robotic arm.
Eight different dispensing tools are available and are based on Eppendorf classic air cushion pipetting technology
• Free-jet pipetting, no tubes, no wires, no air bubbles to minimize cross-contamination
• Contact pipetting, for better performance at volumes <1 µL
• Excellent pipetting precision, below 2% cv at 1 µL*
• Volume range: 0.2-10 µL, 1–50 µL, 20–300 µL and 40–1000 µL
• Single or 8-channel
• Autoclavable & easy to maintain
• Automatic calibration warning
• Calibration based on ISO 8655
*Eppendorf application note 168: »Evaluation of the Eppendorf epMotion® Pipetting Tools using the Artel MVS®.«
CleanCap - UV/HEPA
The CleanCap option can be configured for new epMotion 5073 & 5075 versions.
Here a UV light (254 nm) is used for decontamination and the HEPA filters
provide clean air inside of the epMotion.
Gripper
Tool
The gripper tool allows transport of labware on the worktable of epMotion 5073 or 5075 versions. It is loaded by automatic tool exchange and can be programmed easily in the software. The stacking of up to 5 plates is possible.
Read More
Read Less
| Specifications | epMotion® 5073l MultiCon |
|---|
| Noise level | ~ 56 dB(A) |
| Application | PCR/qPCR and normalization |
| Volume range | 0,2 µL – 1 mL |
| Power supply | 100 – 240 V ±10 %, 50 – 60 Hz ±5 % |
| Max. power consumption | 600 W |
| Dimensions (W × D × H) | 65 × 61 × 67 cm / 26 × 24 × 27 in |
| Weight w/o accessories | 92 kg |
| Weight w/o accessories | 50 kg / 110,2 lb |
| Pipetting type | Air cushion system |
| Operation | Electronic |
| Autoclavable | yes (tools) |
| SLAS/ANSI positions | 6 |
| Gripper carrying capacity | 1,200 g |
|
Dispensing tool1)2) |
|
| Random measurement error (1 µL) | ≤3 % |
| Systematic measurement error (1 µL) | ±5 % |
| Random measurement error (25 µL) | ≤0.6 % |
| Systematic measurement error (25 µL) | ±1.5 % |
| Random measurement error (50 µL) | ≤0.4 % |
| Systematic measurement error (50 µL) | ±1.2 % |
| Random measurement error (150 µL) | ≤0.4 % |
| Systematic measurement error (150 µL) | ±1 % |
| Random measurement error (1,000 µL) | ≤0.15 % |
| Systematic measurement error (1,000 µL) | ±0.7 % |
|
1)in pipetting mode, free jet, without pre-wetting, with distilled water, at 20 °C 2)See Eppendorf Application Note 168 for typical pipetting performance |
|
|
Thermal module |
|
| Temperature range | 0 °C - 110 °C |
| Heating rate | 9 °C/min |
| Cooling rate | 4 °C/min |
|
X-Y-Z axis positioning accuracy |
|
| Random deviation | ±0.3 mm |
| Systematic deviation | ±0.1 mm |
|
Detector |
|
| Optical sensor | Contact-free recognition of fill level, inserted tools, labware, tip types and quantities |
|
Conductor – X, Y, Z Positioning |
|
| Random measurement error | ±0.1 mm |
|
Eppendorf MultiCon |
|
| Interfaces | 4 × USB 3.0 on I/O; 2 × USB 2.0 (USB Front Access) |
| Touch panel | 19.5'' diagonal |
- PCR & qPCR set-up
- Serial dilution and normalization of samples
- Sample or reagent transfer
- Sample mixing and tempering
- Assay set-up
- Media change and other cell culture applications
- 6 ANSI/SLAS microplate positions
- Software assistants for simple, step-by-step application programming
- Optical sensor 1) for detecting liquids, labware, tips
- Automatic replacement of 3 pipetting tools
- Volume range of 1 to 1,000 µL for maximum pipetting accuracy
- Compatible with tubes (0.2 to 50 mL) and microplates with up to 384 wells
- Calibrated 1-channel and 8-channel pipetting tools
- Optional UV lamp and HEPA filter system for decontamination and clean air conditions
- Fully enclosed, compact housing with door lock
- MultiCon PC controller by touch, mouse or keyboard, upgradable for barcode tracking and GLP/GMP software versions
- Integrated LEDs for visual feedback of system status like idle, run in progress or run finished
Downloads: epMotion® 5073l
Webinar: Liquid Handling for NGS Workflows
Generating high-quality NGS libraries is a labor-intensive process that requires experience, precision, and accuracy. In this webinar, you will learn:
- The basics of NGS workflows & expert advice on getting started with NGS in your lab
- Practical tips and tricks for manual and automated liquid handling
- How Eppendorf epMotion can help you achieve reliable and reproducible sequencing results
Eppendorf SE
You are about to leave this site.
Please be aware that your current cart is not saved yet and cannot be restored on the new site nor when you come back. If you want to save your cart please login in into your account.