Logged in as::
You are about to leave this site.
Please be aware that your current cart is not saved yet and cannot be restored on the new site nor when you come back. If you want to save your cart please login in into your account.
Centrifuge 5810/ 5810 R - Benchtop Centrifuge
General Lab Product Version
Do I need IVD?
Since May 2022, the EU IVD Regulation (IVDR) 2017/746 replaces the IVD Directive 98/79/EC under which a variety of Eppendorf products were registered as IVD products. The new IVDR, and resulting recommendations from leading European Life Science Organizations, provide more clarity on product types that may be classified as in-vitro diagnostic medical devices, which has led to some changes in our IVD product portfolio.
Eppendorf continues to offer centrifuges in two versions: An EU-IVD compliant version for diagnostic applications (affixed with the CE IVD mark according to the EU In Vitro Diagnostics Regulation (IVDR) 2017/746), and a General Lab Product version for research applications.
Eppendorf pipettes, pipette tips and tubes affixed with the CE IVD mark are discontinued in May 2022. To ensure that you can keep working with our products in IVD applications, the intended use of our "General Lab Product" pipettes, pipette tips and tubes has been changed however: Eppendorf pipettes, pipette tips and tubes without CE IVD mark are now suitable for all general laboratory applications including IVD applications and can be purchased and used as such since January 2022 (in the EU and EFTA countries).
Learn more here
Product InformationThe high-speed Centrifuge 5810/5810 R is one of the smallest 3 L benchtop centrifuge currently available. It is the workhorse for medium to high-throughput laboratories and combines versatility and high capacity to allow you to use both tubes and plates.
You will find additional download material at the bottom of this page
Show more Products
Show more Products
Show more Products
Show more Products
Show more Products
Centrifuge 5810/5810 R, with its renowned quality and reliability, offers you the most cost-effective solution for medium to high-throughput applications requiring speeds of up to 20,913 x g (14,000 rpm). This benchtop centrifuge has been designed to fit into every lab and make routine work more comfortable thanks to its quiet operation, soft-touch lid closure and low access height for easy loading and unloading.
Experience true versatility with a broad selection of rotors and adapters that facilitate mixed loading of tubes, bottles and plates. A new generation of rotors increases the capacity of Centrifuge 5810/5810 R to a maximum of 4 x 750 mL (or 28 x 50 mL / 56 x 15 mL). The swing-bucket rotor and adapters accommodate tubes and bottles from 0.2 mL to 750 mL, and the fixed-angle rotor 0.2 mL to 85 mL tubes. The plate rotor is ready for you to carry out centrifugation of all types of multiwell plates, such as PCR, cell culture, or deep-well plates.
Aerosol-tight lids for easy, one-hand operation
The Eppendorf QuickLock® caps significantly improve handling and facilitate easy, one-handed operation. You can safely transport the closed bucket with the handle to the biosafety cabinet where it can be opened in a safe environment.
Proud Owner of an Eppendorf product? Already registered?
Did you know that if you register your Eppendorf product with us you will get the following?
• 100 epPoints® (for each product you register) to redeem in our rewards shop
• Additional 3 months warranty when you register a Centrifuge, Shaker, CO2 Incubator or Cycler
• Entry in an exclusive Eppendorf prize draw (for each product you register)
• Get your personal product story to be posted on the Eppendorf website
Getting started is super easy! Either -
1. Download the Eppendorf App, scan and register OR
2. Visit our webpage, log onto your myEppendorf account and enter the product serial number
Disposal of packaging
The packaging of the centrifuge contains different materials, this can include a wooden pallet, cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our centrifuge packaging cardboard material consists of ca. 50% recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the freezer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend to select a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.
Disposal of instrument
Our centrifuges last for many years, but if they need to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with active cooling. Keeping it “local“ reduces the impact of transportation, and the „certified“ aspect is recommended due to the safe and sustainable removal and recycling of the cooling liquids if it is a refrigerated centrifuge.
This piece of equipment was used in a laboratory and/ or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/ or waste officer. Check if your local recycling partner has special instructions and/ or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance.
|Max. RCF||20,913 × g||20,913 × g|
|Max. RCF with fixed-angle rotor||20913 × g||20913 × g|
|Max. RCF with swing-bucket rotor||4500 × g||4500 × g|
|Max. RCF with plate rotor||3486 × g||3486 × g|
|Display||large, brightly lit LCD||large, brightly lit LCD|
|Speed||200 – 14,000 rpm||200 – 14,000 rpm|
|Max. capacity||4 × 750 mL/4 × 4 MTP||4 × 750 mL/4 × 4 MTP|
|Number of programs||35 user-defined programs||35 user-defined programs|
|Timer||1 min to 99 min, with continuous run function, short-spin||1 min to 99 min, with continuous run function, short-spin|
|Noise level||<70 dB(A)||<56 dB(A)|
|Volume range||3 L||3 L|
|Power supply||230 V, 50 – 60 Hz||230 V, 50 – 60 Hz|
|Max. power consumption||900 W||1650 W|
|Dimensions (W × D × H)||53.5 × 60.8 × 34.5 cm / 21.1 × 23.9 × 13.6 in||70.0 × 60.8 × 34.5 cm / 27.6 × 23.9 × 13.6 in|
|Footprint (dimensions w/o front panel, WxD)||54 × 54 cm / 21.1 × 21.1 in||70 × 54 cm / 27.6 × 21.1 in|
|Weight w/o accessories||68 kg / 149.9 lb||99 kg / 218.3 lb|
|Height (with open lid)||80 cm / 31.5 in||80 cm / 31.5 in|
|Temperature range||–||-9 °C to 40 °C|
|Conical tubes||56 × 15 mL/ 28 × 50 mL||56 × 15 mL/ 28 × 50 mL|
|Plates||16 × MTP/ 4 × DWP||16 × MTP/ 4 × DWP|
|Blood collection tubes||100 × 13 mm/ 80 × 16 mm||100 × 13 mm/ 80 × 16 mm|
|Rotor FA-45-6-30 (6×50 mL)||<56 dB(A)||<55 dB(A)|
|Rotor S-4-104 (4×750 mL)||<70 dB(A)||<56 dB(A)|
|Rotor S-4-72 (4×250 mL)||–||–|
- Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 750 mL
- Plate rotors for centrifugation of all types of MTP, PCR, cell culture, or Deepwell Plates
- Fixed-angle rotors for high-speed applications in tubes from 0.2 mL to 85 mL
- High centrifugation speed of up to 20,913 × g (14,000 rpm)
- Aerosol-tight Eppendorf QuickLock® caps and lids for easy, one-hand operation
- Centrifuge lid with soft-touch lid closure
- Low access height of 29 cm for easy loading and unloading of samples
- Quiet operation to improve your work environment
- Compact footprint saves valuable bench space
- Automatic rotor recognition and imbalance detection for maximum operational safety
- Warranty: 2 Years Parts and Labour
Additional features of refrigerated Centrifuge 5810 R
- Temperature range from -9 °C to 40 °C
- FastTemp function for fast pre-cooling
- Continuous cooling maintains a constant temperature after the run has been completed – your samples stay cool
- ECO shut-off engages after 8 hours of non-use to reduce energy consumption and to extend compressor life
- Dynamic compressor control (DCC) technology for optimized cooling performance
Downloads: Centrifuge 5810/ 5810 R