What materials are Combitips advanced made of and what chemicals are they resistant to?

Please refer to the Instructions for Use and the chemical resistance sheet of the Combitips advanced on our homepage for detailed information.

How are the Combitips advanced tested during production?

Combitips advanced are produced according to a validated quality management and the production process is checked with daily spot tests according to standard operation procedures using the multipette and Combitips advanced system. The acceptance criteria here are the measurement errors, which are listed in the Instructions for Use. Please check the Certificate of Quality, which confirms the manufacturing process of Eppendorf dispenser tips according to ISO norms.

Which certificates are available for Combitips advanced?

Please check www.eppendorf.com/certificates for general and lot specific certificates available for Combitips advanced.

Are Combitips advanced manufactured in purity grade "Eppendorf Quality" also sterile?

No, Combitips advanced manufactured in purity grade "Eppendorf Quality" are packed straight from production, but they are not specially sterilized. Combitips advanced in purity grade "Biopur" are recommended if sterile dispenser tips are necessary for the application.

Are Combitips advanced autoclavable?

Combitips advanced are not autoclavable as they are made of materials which are impacted by autoclaving. This could lead to leakage affecting the performance of Combitips advanced. Please note, that Combitips advanced are single-use consumables. Combitips advanced in purity grade "Biopur" are recommended if sterile dispenser tips are necessary for the application.

Are the Biopur Combitips advanced tested according to USP and EP?

Yes, they are. This information is also given on the corresponding certificate.

Does a Combitip advanced always have to be filled to the total volume?

Combitips advanced do not have to be completely filled for dispensing. As usually the 1st dispensing step must be discarded to perform the reverse stroke. Using the mechanical Multipette M4 with partially filled Combitips advanced, the number of dispensing steps for reverse stroke depends on the set dispensing volume. Please refer to the Instructions for Use for detailed information.

Are Combitips advanced resistant to trifluoroacetic acid?

This substance was tested separately. The test result for trifluoroacetic acid with a concentration below of 50% shows that Combitips can be used. Therefore higher concentrated trifluoroacetic acid (größer 50%) the resistant is dependent on the exposure time.

What is the Combitips advanced Box 2.0 made of?

The Combitips advanced Box 2.0 is made of polycarbonate (PC).

Is the Combitips advanced Box 2.0 autoclavable?

The Combitips advanced Box 2.0 can be autoclaved without any Combitips advanced up to 100 times under standard autoclaving conditions (121 °C, 1 bar overpressure, 20 min).

Are Combitips advanced and ViscoTip certified free from slip agents?

Yes, Combitips advanced and ViscoTip are produced without using slip agents. Please check www.eppendorf.com/certificates for the lot-independant certificate.

Are Combitips advanced and ViscoTip certified free from trace metals?

Please check www.eppendorf.com/certificates for the lot-independant certificate confirming typical low values of trace metals in Combitips advanced and ViscoTip.

Why can Multipette M4 and E3/E3x only be operated with Combitips advanced?

When using a positive displacement system, the dispenser and the dispenser tip must be perfectly matched. This will ensure that the high demands with regard to precision and accuracy are reliably met. Combitips advanced are perfectly matched to Eppendorf Multipette M4 and E3/E3x and M4. Combined with the center sleeve of the devices, accurate dosing for dispensing is supported in particular.

Can Combitips advanced be used for dispensing high-proof alcohols?

Yes, Combitips ® advanced can be used to dispense high-proof alcohols. Using the 5 mL and 10 mL Combitips ® advanced tip sizes with ≥70 % alcohol the dispenser tips have to be prewetted once with the solution. This volume has to be dispensed including the remaining stroke.

text.skipToContent text.skipToNavigation

NO | NOK

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

Combitips^® advanced - Positive Displacement Pipette Tips

Combitips® advanced positive displacement ppette tips for Eppendorf Multipette® multi-dispenser pipettes are available in nine different volume sizes

ACT label of sustainability certification for Eppendorf Combitips advanced Eppendorf Quality 10 mL

Assortment of Eppendorf Combitips® advanced multi-dispenser pipette tips for Eppendorf Multipette® multi-dispenser pipettes

Eppendorf Combitips® advanced 1 mL syringe-style tip positive displacement pipette tip

Combitips® advanced positive displacement pipette tip for Multipette® multi-dispenser pipettes from Eppendorf

The Combitips® advanced Box 2.0 from Eppendorf (sold separately) allows for ergonomic, single-handed tip attachment

Eppendorf Combitips® advanced positive-displacement pipette tips come in a handy box with extricable chute

Multipette® M4 Multi-Dispenser Held By Scientist (Product Close-Up)

Multipette® E3x Electronic Multi-Dispenser Held By Scientist (Product Close-Up)

Product Information

Optimize your workflows involving plates or large series of other vessels with Combitips advanced dispenser tips and accurately and precisely pipette both viscous and volatile liquids. These positive displacement pipette tips are your consumable of choice for all Multipette^® multi-dispenser pipettes from Eppendorf and offer a variety of advantages in comparison to their predecessor Combitips plus. Available in nine volume sizes (0.1 mL – 50 mL), Combitips advanced have a maximum range of dispensing volumes with increments as low as 100 nanoliters depending on the Multipette model used.

Show more Product Information

You will find additional download material at the bottom of this page

Product Information

Technical Data

Applications

Features

Your tip of choice when working with Multipette^® multi-dispenser pipettes from Eppendorf

Thanks to their revolutionary design, Combitips advanced dispenser tips provide you with many benefits for work in a modern laboratory. With an integrated piston, they function according to the positive displacement principle and ensure that the correct volume of liquid is dispensed regardless of the physical properties of the liquid you work with (e.g., viscosity, volatility, density, temperature). You can therefore achieve high-precision dispensing, independent of the flow characteristics of the liquid, and safely work with radioactive or toxic materials due to the hermetically sealed piston that prevents aerosol contamination.

Eppendorf pioneered the Multipette/Combitips multi-dispenser system in 1978 and improved it several times since. It was the very first pipetting system allowing users to fill the tip once and dispense multiple times. The concept remains a driver for efficient liquid handling and a staple in many labs working with plates or series of tubes. In 2023, the Combitips advanced pipette tip line-up has been certified with ACT^® Environmental Impact Factor Labels by the My Green Lab^® non-profit organization, making it the ideal choice for labs looking for more sustainable products.

Adjustable dispensing volumes with Multipette M4 multi-dispenser pipettes

Both the Multipette M4 and Multipette E3/E3x multi-dispenser pipettes from Eppendorf work in perfect harmony with Combitips advanced positive displacement pipette tips. You can easily choose from a variety of dispensing volumes in the range of 1 µL to 10 mL, depending on the Combitips advanced tip used. For each Combitips advanced tip, 20 different dispensing volumes can be set. Depending on the volume required, 5 to 100 dispensing steps can be carried out with a Combitips advanced tip that is filled to full capacity. Learn more with our technical datasheets, available for download below under "Manuals".

The choice of different volume sizes and purity grades ensures fit to a variety of applications

With 9 volume sizes (0.1 mL to 50 mL) and 4 purity grades (Eppendorf Quality, PCR clean, Biopur^® and Forensic DNA Grade), you will always find the perfect Combitips advanced dispenser tip for your application!

• Combitips advanced in our highest purity grade 'Biopur' are individually blister-wrapped, sterile and free of pyrogens, RNases, DNases, DNA and ATP as well as PCR inhibitors. The ideal choice for the most sensitive lab applications.
• Combitips advanced in purity grade ‘Forensic DNA Grade’ conform to the requirements of ISO 18385 and are particularly well suited for forensic applications and the isolation and analysis of DNA.
• ‘PCR clean’ tips are certified to be free from human DNA, DNase, RNase and inhibitors that could adversely affect PCR applications.
• The purity grade 'Eppendorf Quality' is the right choice for routine applications – the tips are shipped in bulk packs and fulfill everything expected of reliable, easy-to-handle multi-dispenser tips for a variety of non-critical lab applications.
• For highly viscous liquids from 200 mPa*s up to 14.0000 mPa*s please also consider the ViscoTip.

For more details on our production quality and purity grades, please visit our dedicated microsite. Lot-specific certificates for Combitips advanced are available for download here: www.eppendorf.com/certificates.

Compatibility of Combitips advanced with standard laboratory tubes

Elongated Combitips^® advanced (2.5 mL, 5 mL, and 10 mL) enable the complete emptying of all common tubes and prevent sample loss.

How can you recognize an original Combitip from Eppendorf?

Unmistakeably Eppendorf: All original Combitips advanced feature a "ring" of drop-shaped relief elements on the edge of the tip crown.

Disposal of packaging material and used Combitips advanced dispenser tips

The packaging of Combitips advanced dispenser tips contains cardboard and blister material as well as wrapping foils made of plastic. Combitips are shipped in packaging that contains at least 92 % recycled cardboard. Please support the global sustainability initiative of recycling valuable raw material by collecting the cardboard and disposing of it in appropriate recycling containers. In respect to the plastic packaging made of Polyamid (PA) and Polyethylene (PE), we recommend to select a dedicated recycling partner where PA and PE can be recycled.

After usage, the Combitips advanced dispenser tips may be contaminated and can pose a biohazard, chemical hazard, or even nuclear hazard. Hazardous (or "critical") lab waste can usually not be recycled and must be burned in many countries due to legal restrictions. To reduce the amount of critical plastic waste, you should use at least two waste containers: One for critical waste and one for non-critical waste. The exact definition of these two groups may depend on local regulations and should be communicated/trained in your lab accordingly. For further local waste recycling options please contact your biosafety officer and your local waste management. We recommend you work with a certified local recycling partner with experience in handling of lab waste.

Read Less

Specifications	Combitips^® advanced - 0030089405	Combitips^® advanced - 0030089766	Combitips^® advanced - 0030089618	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A	Combitips^® advanced - N/A

ACT label	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes
Product type	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables	Consumables
Pipetting type	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system	Positive displacement system
Tip size	0.1 mL	0.1 mL	0.1 mL	0.2 mL	0.2 mL	0.2 mL	0.5 mL	0.5 mL	0.5 mL	1.0 mL	1.0 mL	1.0 mL	1.0 mL	2.5 mL	2.5 mL	2.5 mL	2.5 mL	5.0 mL	5.0 mL	5.0 mL	5.0 mL	10 mL	10 mL	10 mL	25 mL	25 mL	25 mL	50 mL	50 mL	50 mL
Color code	white	white	white	light blue	light blue	light blue	violet	violet	violet	yellow	yellow	yellow	yellow	green	green	green	green	blue	blue	blue	blue	orange	orange	orange	red	red	red	light gray	light gray	light gray
Tip color	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips	colorless tips
Purity grade	Eppendorf Quality	PCR clean	Biopur^®	Eppendorf Quality	PCR clean	Biopur^®	Eppendorf Quality	PCR clean	Biopur^®	Eppendorf Quality	PCR clean	Biopur^®	Forensic DNA Grade	Eppendorf Quality	PCR clean	Biopur^®	Forensic DNA Grade	Eppendorf Quality	PCR clean	Biopur^®	Forensic DNA Grade	Eppendorf Quality	PCR clean	Biopur^®	Eppendorf Quality	PCR clean	Biopur^®	Eppendorf Quality	PCR clean	Biopur^®
Packaging	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs., individually blister-wrapped	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs., individually blister-wrapped	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs., individually blister-wrapped	100 pcs. (4 bags × 25 pcs.)	100 pcs. (4 reclosable bags × 25 pcs.)	100 pcs., individually blister-wrapped	100 pcs. (4 boxes × 25 pcs.), each box containing one adapter	100 pcs. (4 reclosable bags × 25 pcs.), each box containing one adapter	100 pcs. (4 bags × 25 pcs.), individually blister-wrapped, each box containing one adapter	100 pcs. (4 boxes × 25 pcs.), each box containing one adapter	100 pcs. (4 reclosable bags × 25 pcs.), each box containing one adapter	100 pcs. (4 bags × 25 pcs.), individually blister-wrapped, each box containing one adapter
Open system (third party consumables)	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no	no

Performance data with Multipette E3 & E3x / Repeater E3 & E3x
Random measurement error	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL
Systematic measurement error	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL
Volume range	1 – 100 µL	1 – 100 µL	1 – 100 µL	2 – 200 µL	2 – 200 µL	2 – 200 µL	5 – 500 µL	5 – 500 µL	5 – 500 µL	10 – 1.000 µL	10 – 1.000 µL	10 – 1.000 µL	10 – 1.000 µL	25 – 2.500 µL	25 – 2.500 µL	25 – 2.500 µL	25 – 2.500 µL	50 – 5.000 µL	50 – 5.000 µL	50 – 5.000 µL	50 – 5.000 µL	100 – 10.000 µL	100 – 10.000 µL	100 – 10.000 µL	250 – 25.000 µL	250 – 25.000 µL	250 – 25.000 µL	500 – 50.000 µL	500 – 50.000 µL	500 – 50.000 µL

Performance data with Multipette M4 / Repeater M4
Random measurement error	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL
Systematic measurement error	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL
Volume range	1 – 20 µL	1 – 20 µL	1 – 20 µL	2 – 40 µL	2 – 40 µL	2 – 40 µL	5 – 100 µL	5 – 100 µL	5 – 100 µL	100 – 200 µL	100 – 200 µL	100 – 200 µL	100 – 200 µL	25 – 500 µL	25 – 500 µL	25 – 500 µL	25 – 500 µL	50 – 1.000 µL	50 – 1.000 µL	50 – 1.000 µL	50 – 1.000 µL	100 – 2.000 µL	100 – 2.000 µL	100 – 2.000 µL	250 – 5.000 µL	250 – 5.000 µL	250 – 5.000 µL	500 – 10.000 µL	500 – 10.000 µL	500 – 10.000 µL

Downloads: Combitips^® advanced

Brochure

The 360° Evolution

Combitips^® advanced dispenser tips from Eppendorf

PDF 2.5MB

English

Flyer

Eppendorf Purity Grades Selection Guide

Eppendorf Forensic DNA Grade according to ISO 18385

PDF 1.3MB

English

You might also consider

ViscoTip^®

Special positive displacement tip to dispense highly viscous liquids with Multipette^® multi-dispenser pipettes.

Multipette® E3x electronic multi-dispenser by Eppendorf

Multipette^® E3/Multipette^® E3x

Electronic multi-dispenser pipette. Like the M4, but with far more options, e.g. for dilution series, titration, automatic dispensing into microplates and vessel series.

Multipette^® M4

Mechanical multi-dispenser pipette for contamination-free dispensing of aqueous, viscous and volatile liquids. Fast filling of microplates and vessel series.

Eppendorf twin.tec^® Trace PCR Plates

Twin.tec Trace PCR plates are ideal for automated and standardized workflows. These microplates increase reproducibility for applications like NGS.

Eppendorf Microplate with OptiTrack® matrix

Eppendorf Microplates

Unrivalled transparency with the Eppendorf Microplate

Eppendorf Deepwell Plates

High-quality, superior performance Eppendorf Deepwell Plates.

Eppendorf Tubes^® BioBased

Tubes made with 90 % biobased plastic which can be traced back to biological waste material. Available with screw cap in volumes 5.0 mL to 50 mL. Ideal for cell culture, cell biology applications, sample preparation in microbiology and molecular biology.

Eppendorf Xplorer® / Xplorer plus single- and multi-channel electronic pipettes

Eppendorf Xplorer^®/ Eppendorf Xplorer^® plus

Electronic air-cushion pipette for a large variety of applications. Intuitively adjustable parameters for easy, fast, and accurate pipetting.

You are about to leave this site.

Combitips® advanced - Positive Displacement Pipette Tips

Assortment of Eppendorf Combitips® advanced positive displacement pipette tips

ACT label of sustainability certification for Combitips advanced Eppendorf Quality 10 mL

Assortment of Eppendorf Combitips® advanced multi-dispenser pipette tips for Eppendorf Multipette® multi-dispenser pipettes

Eppendorf Combitips® advanced 1 mL syringe-style tip positive displacement pipette tip

Combitips® advanced positive displacement pipette tip for Multipette® multi-dispenser pipettes from Eppendorf

The Combitips® advanced Box 2.0 from Eppendorf (sold separately) allows for ergonomic, single-handed tip attachment

Eppendorf Combitips® advanced positive-displacement pipette tips come in a handy box with extricable chute

Multipette® M4 Multi-Dispenser Held By Scientist (Product Close-Up)

Multipette® E3x Electronic Multi-Dispenser Held By Scientist (Product Close-Up)