Software/Firmware revisions are made available at no charge through this web page so that all users can benefit from the latest performance enhancements.
The easy upgrade procedure takes only a few minutes to perform.
Software/Firmware revisions are made available at no charge through this web page so that all users can benefit from the latest performance enhancements.
The easy upgrade procedure takes only a few minutes to perform.
NOTE: The update tool will connect to the Eppendorf servers to download the latest software update for your electronic Eppendorf pipette. Instructions how to install the update are included in the .zip file.
WARNING: With a software update, the pipette is reset to factory settings and all settings and saved programs or favorites (if any) are deleted.
Download ep_update_tool_v2.zip
Latest update/Version | Description of Changes |
---|---|
06-March-2023 | Eppendorf Xplorer®, Xplorer plus and Xplorer plus Move It® :
Multipette®/Repeater® E3 or E3x:
_________________________________________
|
NOTE: Empty USB flash drive with at least 512 MB storage space in FAT32 format needed to perform an update. Instructions how to install the update are included in the .zip file. Important: Please insert the USB drive only after booting up the Pipette Manager.
Download VisioNize_pipettemanager_software_update.zip
Latest update/Version | Description of Changes |
---|---|
31-March-2023 Rev. 1.1.3 |
_________________________________________
|
Date/File/Version | Description of Changes |
---|---|
VisioNize box Updates.zip | Firmware revision 1.16.0.0 implements compatibility to the VisioNize Lab Suite. |
NOTE: The RackScan Analyzer software is used to read 2D data matrix codes on consumables and to transfer the information contained in the 2D data matrix codes for further use in software applications.
The RackScan Analyzer software was developed to be used with RackScan b and RackScan s.
Date/File/Version | Description of Changes |
---|---|
20-Dec-2019 RackScan Analyzer.zip Version: 3.15 (build 3129) | The zip-file includes the following files:
|
Date/File/Version | Description of Changes |
---|---|
3.5.0-ThermoMixer_Autoupdate.zip | Software version 3.5.0 introduces a new application feature for thawing cells which is exclusively available for the Eppendorf ThermoMixer® C in combination with the new Eppendorf SmartBlock™ cryo thaw. Furthermore there are several minor additions, updates and fixes for the Eppendorf ThermoMixer® C, ThermoMixer® F, and ThermoStat® C such as • User notifications by LEDs and simple melodies in special programs (e.g. “Thawing cells”) |
Date/File/Version | Description of Changes |
---|---|
30-Jan-2019 Update_M1372_B.00.zip Version Analog B.00 | Analog I/O software revision B.00 includes the ability to recognize and control up to 8 Analog I/O modules from a single installed version, and addresses previous issues with communication loss. |
NOTE: This update is required for any current customer planning to use BioCommand with a BioFlo® 720.
WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.
Date/File/Version | Description of Changes |
---|---|
06-Oct-2021 BioCommand_BCTT_Update_05.02.zip | Revision 5.02 includes the following enhancements:
|
For BioCommand Batch Control Plus, a specific software update procedure is required for Revision 5.01.
Please contact your local Eppendorf service representative for assistance.
NOTE: This update is required for any current customer planning to use BioCommand with a BioFlo® 720.
WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.
Date/File/Version | Description of Changes |
---|---|
06-Oct-2021 BioCommand_BCTT_Update_05.02.zip | Revision 5.02 includes the following enhancements:
|
Date/File/Version | Description of Changes |
---|---|
30-Jan-2019 | Software revision 05.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller: • Update for Corporate Identity |
Date/File/Version | Description of Changes |
---|---|
25-March-2021 | Software revision 02.08 incorporates the following solutions/additions to improve the performance of your bioprocess controller: • 1SLPM and 5SLPM TMFC’s with different turndown ratios support is added |
Please contact your local Eppendorf service representative for assistance
Please contact your local Eppendorf service representative for assistance
Please contact your local Eppendorf service representative for assistance
Please contact your local Eppendorf service representative for assistance
Date/File/Version | Description of Changes |
---|---|
17-Feb-2021 | Software revision 03.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller:
|
NOTE: This update is specific to 1st generation CelliGen BLU cabinets. Please check the model of your CelliGen BLU cabinet. If your CelliGen BLU model number begins with the prefix "M1363", please follow the steps on this page to complete your update. If your CelliGen BLU model number begins with the prefix "M1374", please see the update CelliGen BLU (2nd Generation)
Date/File/Version | Description of Changes |
---|---|
30-Jan-2019 Update_M1363_C.00.zip | Software revision C.00 provides the following resolutions and/or enhancements: • Manual gas mixing total percent correction |
NOTE: This update is specific to 2nd generation CelliGen BLU cabinets. Please check the model of your CelliGen BLU cabinet. If your CelliGen BLU model number begins with the prefix "M1374", please follow the steps on this page to complete your update. If your CelliGen BLU model number begins with the prefix "M1363", please see the update for CelliGen BLU (1st Generation).
Date/File/Version | Description of Changes |
---|---|
30-Jan-2019 | Software revision 02.02 incorporates the following solutions / additions to improve the performance of your bioprocess controller: Update for Corporate Identity Update default Proportional and Integral values for pH loop |
Date/File/Version | Description of Changes |
---|---|
30-Jan-2019 M1295 RS232 Device Interface Kit Rev B.00 - Update.zip Version B | Update resolves communication errors with PC COM ports. |
Please contact your local Eppendorf service representative for assistance.
Latest version: 1.1.1.375