I have noticed that more solution is used for reverse pipetting than for normal pipetting. What is the reason for this?

Reverse pipetting means uptake of liquid including the blow-out volume and dispensing of liquid without the blow-out volume. Reverse pipetting is recommended to reduce the error with viscous or foaming liquids or when dispensing very small sample volumes. The excess solution aspirated remains in the tip and is discarded.

What is reverse pipetting using an air-cushion pipette? Is there literature available?

Unlike forward pipetting, reverse pipetting involves pressing the pipette button to the second pressure point, allowing a greater volume to be aspirated into the tip. When dispensing liquid, there’s no pipette blow-out; instead, the residual liquid remains in the tip. This technique offers enhanced accuracy and precision for pipetting liquids with high viscosity or those prone to foam or produce bubbles. Eppendorf offers a variety of literature explaining the technique and proving application examples, such as the Userguide 020, several webinars, and YouTube videos.

What is pre-wetting using an air-cushion pipette, and is it volume-independent?

Regardless of the volume, the air cushion should be wetted by multiple filling and emptying of the tip before dispensing.

What are effective techniques for pipetting viscous liquids?

When pipetting viscous liquids, we recommend positive displacement instruments such as the Multipette (M4, E3, E3x). Those instruments offer the best dosing accuracy for viscous liquids due to the piston integrated into the tip. When handling viscous liquids with an air-cushion pipette (Research plus, Reference 2), be sure to pipette slowly and use reverse pipetting (see Userguide 020 or our extensive eBook on www.eppendorf.com/Pipetting-eBook for guidance). Additionally, adjust your pipette settings to account for differences in density by using the temporary adjustment. However, results will not match those achieved with a positive displacement device.

What is the best way to dispense organic solvent?

It is best to use a positive displacement device like the Multipette. Positive displacement devices are most suitable for precise and drip-free dispensing of liquids with high vapor pressure. As the liquid is enclosed in a tip with integrated piston, the solvent vapor does not come into direct contact with the instrument.

Are your pipettes free of nucleic acids?

We cannot guarantee that our pipettes are completely free of nucleic acids. While we maintain high standards of cleanliness and care during production, we do not implement specific measures to prevent nucleic acid contamination. To protect your samples from potential contamination, we recommend using positive displacement devices or filter tips, such as ep Dualfilter T.I.P.S. or ep Dualfilter T.I.P.S. SealMax.

When should I grease my Eppendorf pipettes?

The piston or cylinder in the lower part of the pipette should be relubricated after cleaning, decontamination, or exposure to grease-dissolving solutions such as organic solvents. Re-greasing your pipette after autoclaving is not necessary.

How should warm or cold liquids be pipetted?

Best Practices for Pipetting Warm or Cold Liquids: Warm and cold liquids can behave differently than those at room temperature, requiring adjustments in pipetting techniques. Temperature differences between the liquid and the pipette can affect the air cushion, resulting in inaccuracies and imprecision that may exceed permissible error limits. To achieve optimal results, ensure that the pipette, tips, liquid, and surrounding air are all at the same temperature. For enhanced accuracy and precision, consider using a positive displacement device like the Multipette M4 or E3/E3x.

Can the heat of my hand affect my pipetting result?

Modern pipettes address this issue by ensuring sufficient spatial separation between the piston and the handle. Additionally, the materials used in our pipettes support thermal shielding/isolation to prevent heat transfer from your hand (see Userguide 021).

Do Eppendorf pipettes always have to be kept in a stand or can they also be put down on the laboratory bench?

The pipette can be placed on the laboratory bench, but never with liquid inside the tip. In general, it is best to keep pipettes on the pipette carousel. When storing pipettes in a drawer, ensure the pipette does not come into contact with the drawer walls or other equipment, as this may damage the pipette when the drawer is opened or closed.

How can I adjust my air-cushion pipette for challenging liquids, long tips, or higher/lower altitudes?

Upon manufacturing, pipettes are calibrated to distilled water. Eppendorf mechanical pipettes allow temporary user adjustments, beneficial for liquids with different physical properties than water (density, viscosity, surface tension, vapor pressure), or when capillary actions occur (e.g., with DMSO). Adjustments are also beneficial when atmospheric pressure changes due to altitude or when using non-standard pipette tips (e.g., epT.I.P.S. long). The adjusted pipette delivers the correct volume only for the liquid used during adjustment. Please be aware that variable mechanical pipettes turn into "fixed-volume pipettes" when being adjusted. That means they can only be adjusted to a specific liquid to one volume and not across the entire dispensing range. Research plus and Reference 2 pipettes feature an adjustment window where the change can be monitored. It can be set back to factory settings "0". For detailed procedures and examples, refer to the operating instructions and Application Note No. 198. In contrast to mechanical pipettes, the electronic Xplorer/Xplorer plus pipettes can be adjusted for the entire range of volume. Additionally, the electronic pipettes offer several options for adjusting the pipette in the "Options" menu, e.g. to 75 % ethanol, altitude, elongated tips. Furthermore, individual adjustments are possible, as 1-point, 2-point or 3-point settings. For more information see User Guide 036. Temporary user adjustments can be reset to manufacturer settings without recalibration.

How do I determine the volume values when calibrating gravimetrically?

The most common method involves measuring the mass of distilled water (whose physical properties are known) using a balance, and then converting the mass to a volumetric value. This means that the measurement values from the analytical balance are multiplied by the correction factor Z (see SOP pipettes). This adjustment accounts for the density of water at the specific temperature and the relevant air conditions.

What does EN ISO 8655 cover?

ISO 8655-2022 is the global standard for piston-operated volumetric apparatus (POVA), including pipettes, burettes, dilutors, dispensers, and manual precision syringes, as defined by the International Organization for Standardization (ISO). It ensures standardized performance for manufacturers, calibration providers, and users.It is structured in 10 chapters: ISO 8655-1: Terminology, general requirements and user recommendations ISO 8655-2: Pipettes ISO 8655-3: Burettes ISO 8655-4: Dilutors ISO 8655-5: Dispensers ISO 8655-6: Gravimetric reference measurement procedure ISO 8655-7: Alternative measurement procedures ISO 8655-8: Photometric reference measurement procedure ISO 8655-9: Syringes ISO 8655-10: User guidance, user qualification and POVA qualification.

What do the terms random error and systematic error mean in a pipette calibration?

In pipette calibration, random error and systematic error are two key concepts that help ensure accuracy and precision in measurements. Random Error refers to the variability in measurements when the same volume is dispensed multiple times. It is also known as imprecision and is determined by calculating the repeat standard deviation of 10 measurements. These errors tend to scatter around the true value and can be minimized by consistent technique and proper training. Systematic Error is the consistent deviation of the measured volume from the selected/true volume, also known as inaccuracy and is determined by establishing the mean value of 10 measurements. Systematic errors can arise from defective or misadjusted devices and need to be corrected through proper calibration and maintenance.

Why are the Z factors listed in our SOP different from factors which can be derived from density reference values (of water)?

The Z factor is included in EN ISO 8655-6 and was incorporated into our SOP. As we understand it, it was incorporated in the standard by the Physikalisch Technische Bundesanstalt in Braunschweig. The Z factor describes the density of water at a particular temperature using a 5th degree polynomial. Furthermore, the density of water is corrected by the density of air (derived from air pressure) and a fixed correction value for balances. These corrections are the key reasons for the deviation from density values in various books of tables.

At which volumes should a variable pipette be calibrated?

According to the EN ISO 8655-2022 standard, three series of 10 measurements are used to calibrate a variable-volume pipette. The three test volumes are: 1. Nominal volume (the largest volume adjustable by the user, as determined by the manufacturer) 2. 50% of the nominal volume 3. 10% of the nominal volume, or the lower limit if the minimum is over 10%

What is the nominal volume of a variable pipette?

The nominal volume of a variable pipette is always its maximum volume. For a 100 - 1,000 µL pipette, this means 1,000 µL.

I very frequently work with different chemicals. Can I still perform pipette calibration using water?

As per EN ISO 8655-2022, pipette calibration, which involves checking liquid dispensed by the pipette on a balance, should always be performed using distilled or deionized water. If you are working with chemicals that have different properties than water, consider using the temporary adjustment to minimize errors as outlined in Application Note 198. In general, we recommend using direct displacement devices such as the Multipette M4/E3(x) for challenging liquids.

During weighing (pipette calibration) I obtained steadily decreasing measuring results. Why is this?

The weight fluctuations you measured would appear to be a temperature problem. Please ensure that the pipette, the distilled water used for testing, the tips etc. are all at the same temperature. It is recommended that the pipettes be placed in the weighing room at least 2 hours before the test is performed. While measuring, ensure that transfer of heat from your hands is kept to a minimum (otherwise weight fluctuations may occur!) Tip: do not constantly grasp the pipette in the palm of your hand while waiting for each measurement result! We recommend our standard operating procedure (SOP) for pipettes as a source of basic information on pipette calibration.

How are multi-channel pipettes tested?

According to ISO 8655-2022, every channel of a multi-channel pipette must be tested. While all channels need to be filled, only the channel being tested is measured. Due to the high number of measurements required (e.g., 240 measurements for an 8-channel pipette and 360 measurements for a 12-channel pipette), it is advisable to send the multi-channel pipette to a professional calibration lab. These labs are equipped with specialized balance setups that ensure all channels are filled while only one channel is measured at a time.

Is the pipette grease free of resins?

Yes, the pipette grease supplied by Eppendorf is free of resins.

How many times can Reference 2 be autoclaved?

Our pipettes are checked for a minimum lifetime of five years. This means a normal use with 200,000 strokes, 26,000 volume changes, 100,000 tip ejections, and 175 autoclavings without the pipetting results and pipette material being affected.

The housing of Reference 2 contains different materials. What effects does this have on the pipette during autoclaving?

The Reference 2 is mounted in a way that all materials have room for expansion. Furthermore, only materials are used which are resistant to severe conditions, e.g. autoclaving (pressure, rise in temperature).

Is it possible to deactivate the spring-loaded tip cone of a Reference 2 multi-channel pipette?

Yes. The Reference 2 multi-channel pipettes have a switch on the lower part which deactivates/activates the spring-loaded tip cone.

How often should pipettes be calibrated?

The user determines the frequency of calibration. However, according to EN ISO 8655-2022 Part 1, calibration must be performed regularly and at a minimum, once per year. Routine tests should be performed more frequently, ideally at intervals shorter than those for calibration. The frequency of both calibration and routine tests should be established through a risk assessment. This assessment needs to consider factors such as the frequency of pipette use, the number of users, the aggressiveness of the liquids being dispensed, and the acceptable error limits set by the user. Additionally, any industry- or organization-specific frequency requirements must be adhered to.

What material is my pipette made of and what chemicals is it resistant to?

Please refer to the Operating Manual on our homepage for information on material or chemical resistance before use. The Research plus and Reference 2 have separate chemical resistance sheets. Please note that aggressive chemicals used over a longer period of time may shorten the lifetime of the pipette.

Is it possible to inactivate the spring-loaded tip cone of a single-channel pipette?

Yes, the delivery includes a locking ring to easily deactivate the spring-loaded tip cone. Disassemble the upper from the lower part of the pipette and push the locking ring onto the lower part from the top. Refer to the Operating Manual for an illustrated guide. This is useful for pipette tips not designed for Eppendorf pipette cones.

What is the difference between factory setting and user adjustment?

Eppendorf pipettes offer factory adjustment and temporary adjustment. The temporary adjustment is an easy way of adjusting the pipette temporarily to different conditions (e.g. pipetting a liquid with high density). The factory adjustment should be changed if the pipette was found to be out of specifications during calibration. Before adjusting, exclude other causes such as pipette handling, environmental errors, or worn-out parts.

text.skipToContent text.skipToNavigation

AE | USD

Sorry, we couldn't find anything on our website containing your search term.

Eppendorf Reference^® 2

Pipette monocanal Eppendorf Reference® 2 avec au choix 8 ou 12 canaux

Modification des réglages de volume sur la pipette précise Eppendorf Reference® 2

Pipette mécanique Eppendorf Reference® 2 utilisée avec un tube

Commutateur marche/arrêt pour désactiver les embouts porte-cône à ressort sur la partie basse multicanal de l'Eppendorf Reference 2

Famille de pipettes monocanal Eppendorf Reference® 2

Eppendorf Reference® 2 multi-channel pipette family

Vue des différentes parties de la pipette mécanique Eppendorf Reference® 2

Les pointes à macro volume epT.I.P.S.® permettent d’atteindre facilement le fond de flacons ou tubes à centrifuger de 15 mL, par exemple

Le Portoir-carrousel 2 peut accueillir jusqu’à six pipettes Eppendorf

Technicien de laboratoire avec une pipette mécanique Eppendorf Reference® 2 dans le laboratoire

Product Information

Choose the Eppendorf Reference 2 mechanical pipette with ergonomic single-button operation and benefit from its high precision and accuracy with reduced operating efforts. Its smooth surface and full autoclavability guarantee efficient decontamination - making it the ideal companion when working under sterile conditions. Available as a single-channel pipette in fixed or variable volume, and as 8- and 12-channel pipettes - all with time-saving single-button operation. Once you have experienced this unique operating philosophy you will not want to change back!

Afficher plus d’informations produit

Vous trouverez plus d’informations à télécharger au bas de cette page

Product Information

Technical Data

Applications

Features

A premium pipette that delivers extraordinary precision and accuracy

The Eppendorf Reference 2 mechanical air-cushion pipette with outstanding precision and accuracy is extremely reliable and robust, allowing for a long service life. With its unique single-button operation, the Reference 2 provides fast and ergonomic handling with reduced operating efforts and active aerosol reduction. The clear haptic feedback helps to avoid accidental tip ejection. Don’t compromise on quality and reproducibility – choose the Eppendorf Reference 2 to confidently pipette precious samples accurately and improve your results.
The sturdy handle manufactured with stainless steel protects the pipette from impact and in combination with spring-loaded bumpers, the Reference 2 pipette is likely to stay within calibration even if it takes a fall. These high levels of security make the Reference 2 your ideal companion in applications requiring extremely high levels of accuracy.

Fonctionnement rapide et ergonomique à un seul bouton

La pipette Eppendorf Reference 2 de précision élevée vous permet de bénéficier d’efforts réduits grâce à des forces requises plus faibles pour l’aspiration, la distribution et l’éjection de la pointe. Le temps d’utilisation est également raccourci puisque vous n’avez plus à déplacer le pouce d’un côté à l’autre pour éjecter les pointes, ce qui signifie que les tâches de pipetage peuvent être effectuées plus rapidement. Et comme les pointes sont éjectées immédiatement après la distribution, la contamination de votre pipette par les aérosols est réduite.

Option d’ajustage temporaire convivial pour l’utilisateur

Assurez-vous d’ajuster votre pipette en fonction du type d’échantillon. La pipette mécanique Reference 2 vous permet de le faire facilement, sans modifier les réglages d’usine. Un ajustage simple et temporaire permet de modifier facilement votre Reference 2 pour effectuer un pipetage précis de différents liquides. Vous trouverez les réglages recommandés dans le manuel d’utilisation et vous pourrez les réinitialiser facilement et rapidement pour revenir aux réglages du fabricant.

La compagne idéale dans les environnements de travail stériles

La pipette Reference 2 se démonte facilement, est entièrement autoclavable et dispose d'un boîtier lisse fabriqué en une coulée. Les avantages sont évidents pour les chercheurs qui ont peur de la contamination bactérienne. Grâce à sa surface peu adhérente et au faible nombre de cavités, de rainures et d'éléments coulissants, la Reference 2 est facile à décontaminer et convient particulièrement à une utilisation dans les salles blanches A/B et d'autres environnements stériles.

Vous avez le choix : nous proposons une variété d’options à un ou plusieurs canaux

Toutes les expériences ne sont pas basées sur les mêmes conditions de travail. Selon le type de récipient utilisé, vous avez le choix entre les pipettes monocanal Reference 2, idéales pour travailler avec des tubes et des flacons, et les pipettes multicanaux Reference 2, mieux adaptées aux plaques.

• Tubes et flacons : Pipettes monocanal, disponibles en volume variable ou fixe
• Plaques 96 et 24 puits : Pipettes à 8 et 12 canaux avec possibilité de désactiver les embouts-porte cône à amortisseur de force.

Pipetage sans fatigue et ergonomique

Avec son fonctionnement unique à un seul bouton, la pipette Eppendorf Reference 2 présente un concept d’utilisation innovant et hautement ergonomique qui a été conçu en accord avec les Eppendorf PhysioCare Concept ^® visant à réduire les contraintes exercées sur la main et le bras. Comme la plupart des autres pipettes Eppendorf, la pipette haut de gamme Reference 2 est bien sûr équipée de l’embout porte-cône à amortisseur de force et des technologies SoftEject d’Eppendorf.

Les embouts porte-cône à amortisseur de force permettent un ajustement fiable de la pointe et une fixation sans effort

Les pipettes Eppendorf avec embout porte-cône à amortisseur de force vous permettent d’économiser du temps et de l’énergie. Les pointes s’attachent facilement d’une seule légère poussée, ce qui est confirmé par un signal tactile. Le ressort réduit les forces de fixation et, en même temps, garantit un ajustement reproductible et sûr. Ce design intelligent améliore la reproductibilité d’un utilisateur à l’autre et la cohérence des résultats entre les différents membres du personnel de laboratoire. Toutes les micropipettes d’Eppendorf jusqu’à 1 000 µL (sauf les modèles Move It^® 300 µL) sont équipées de l’embout porte-cône à amortisseur de force. Dans toutes les pipettes multicanaux Reference 2, les ressorts peuvent être désactivés facilement à l’aide d’un commutateur « marche/arrêt » monté sur la partie basse de la pipette.

La technologie SoftEject réduit les forces d’éjection des pointes de 50

%Toutes les pipettes multicanaux non réglables d’Eppendorf utilisent la technologie innovante SoftEject pour garantir que, lors de chaque course d’éjection, les pointes extérieures sont éjectées avant les pointes intérieures. Cela n’est pas perceptible par l’utilisateur mais réduit les forces d’éjection des pointes de 50 %. Il suffit d’appuyer légèrement sur le bouton d’éjection pour que les pointes soient automatiquement éjectées les unes après les autres.

Lire plus

Lire moins

Caractéristiques	Eppendorf Reference^® 2 - 4924000010	Eppendorf Reference^® 2 - 4924000029	Eppendorf Reference^® 2 - 4926000018	Eppendorf Reference^® 2 - 4926000026	Eppendorf Reference^® 2 - 4924000037	Eppendorf Reference^® 2 - 4924000045	Eppendorf Reference^® 2 - 4924000053	Eppendorf Reference^® 2 - 4926000034	Eppendorf Reference^® 2 - 4926000042	Eppendorf Reference^® 2 - 4924000061	Eppendorf Reference^® 2 - 4924000070	Eppendorf Reference^® 2 - 4926000050	Eppendorf Reference^® 2 - 4926000069	Eppendorf Reference^® 2 - 4924000088	Eppendorf Reference^® 2 - 4924000096	Eppendorf Reference^® 2 - 4924000100	Eppendorf Reference^® 2 - 4924000118	Eppendorf Reference^® 2 - 4925000014	Eppendorf Reference^® 2 - 4925000022	Eppendorf Reference^® 2 - 4925000030	Eppendorf Reference^® 2 - 4925000049	Eppendorf Reference^® 2 - 4925000057	Eppendorf Reference^® 2 - 4925000065	Eppendorf Reference^® 2 - 4925000073	Eppendorf Reference^® 2 - 4925000081	Eppendorf Reference^® 2 - 4925000090	Eppendorf Reference^® 2 - 4925000103	Eppendorf Reference^® 2 - 4925000111	Eppendorf Reference^® 2 - 4925000120	Eppendorf Reference^® 2 - 4925000138	Eppendorf Reference^® 2 - 4925000146	Eppendorf Reference^® 2 - 4925000154	Eppendorf Reference^® 2 - 4925000162	Eppendorf Reference^® 2 - 4925000170

Type de produit	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes	Pipettes
Type de pipetage	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system	Air-cushion system
Nombre de canaux	1-channel	1-channel	8-channel	12-channel	1-channel	1-channel	1-channel	8-channel	12-channel	1-channel	1-channel	8-channel	12-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel	1-channel
Plage de volume	0.1 – 2.5 µL	0.5 – 10 µL	0.5 – 10 µL	0.5 – 10 µL	2 – 20 µL	2 – 20 µL	10 – 100 µL	10 – 100 µL	10 – 100 µL	20 – 200 µL	30 – 300 µL	30 – 300 µL	30 – 300 µL	100 – 1,000 µL	0.25 – 2.5 mL	0.5 – 5 mL	1 – 10 mL	1 µL	2 µL	5 µL	10 µL	10 µL	20 µL	20 µL	25 µL	50 µL	100 µL	200 µL	200 µL	250 µL	500 µL	1,000 µL	2 mL	2.5 mL
Color code	dark gray	medium gray	medium gray	medium gray	light gray	yellow	yellow	yellow	yellow	yellow	orange	orange	orange	blue	red	violet	turquoise	dark gray	dark gray	medium gray	medium gray	yellow	light gray	yellow	yellow	yellow	yellow	yellow	blue	blue	blue	blue	red	red
Incrément de volume	0.002 µL	0.01 µL	0.01 µL	0.01 µL	0.02 µL	0.02 µL	0.1 µL	0.1 µL	0.1 µL	0.2 µL	0.2 µL	0.2 µL	0.2 µL	1 µL	0.002 mL	0.005 mL	0.01 mL	−	−	−	−	−	−	−	−	−	−	−	−	−	−	−	−	−
Mode de fonctionnement	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical	mechanical
Embout porte-cône à amortisseur de force	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	no	no	no	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	no	no
Erreur de mesure aléatoire¹⁾	0.1 µL: ± 12%; ± 0.012 µL 0.25 µL: ± 6%; ± 0.015 µL 1.25 µL: ± 1.5%; ± 0.01875 µL 2.5 µL: ± 0.7%; ± 0.0175 µL	0.5 µL: ± 5%; ± 0.025 µL 1 µL: ± 1.8%; ± 0.018 µL 5 µL: ± 0.8%; ± 0.04 µL 10 µL: ± 0.4%; ± 0.04 µL	0.5 µL: ± 8%; ± 0.04 µL 1 µL: ± 5%; ± 0.05 µL 5 µL: ± 2%; ± 0.1 µL 10 µL: ± 1%; ± 0.1 µL	0.5 µL: ± 8%; ± 0.04 µL 1 µL: ± 5%; ± 0.05 µL 5 µL: ± 2%; ± 0.1 µL 10 µL: ± 1%; ± 0.1 µL	2 µL: ± 1.5%; ± 0.03 µL 10 µL: ± 0.6%; ± 0.06 µL 20 µL: ± 0.3%; ± 0.06 µL	2 µL: ± 1.5%; ± 0.03 µL 10 µL: ± 0.6%; ± 0.06 µL 20 µL: ± 0.3%; ± 0.06 µL	10 µL: ± 0.7%; ± 0.07 µL 50 µL: ± 0.3%; ± 0.15 µL 100 µL: ± 0.2%; ± 0.2 µL	10 µL: ± 2%; ± 0.2 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.3%; ± 0.3 µL	10 µL: ± 2%; ± 0.2 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.3%; ± 0.3 µL	20 µL: ± 0.7%; ± 0.14 µL 100 µL: ± 0.3%; ± 0.03 µL 200 µL: ± 0.2%; ± 0.4 µL	30 µL: ± 0.7%; ± 0.21 µL 150 µL: ± 0.3%; ± 0.45 µL 300 µL: ± 0.2%; ± 0.6 µL	30 µL: ± 1%; ± 0.3 µL 150 µL: ± 0.5%; ± 0.75 µL 300 µL: ± 0.3%; ± 0.9 µL	30 µL: ± 1%; ± 0.3 µL 150 µL: ± 0.5%; ± 0.75 µL 300 µL: ± 0.3%; ± 0.9 µL	100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.2%; ± 1 µL 1.000 µL: ± 0.2%; ± 2 µL	250 µL: ± 1.2%; ± 3 µL 500 µL: ± 0.3%; ± 1.5 µL 1250 µL: ± 0.2%; ± 2.5 µL 2500 µL: ± 0.2%; ± 5 µL	500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.25%; ± 6.25 µL 5.000 µL: ± 0.15%; ± 7.5 µL	1.000 µL: ± 0.6%; ± 6 µL 5.000 µL: ± 0.2%; ± 10 µL 10.000 µL: ± 0.15%; ± 15 µL	1 µL: ± 1.8%; ± 0.018 µL	2 µL: ± 1.2%; ± 0.024 µL	5 µL: ± 0.6%; ± 0.03 µL	10 µL: ± 0.5%; ± 0.05 µL	10 µL: ± 0.6%; ± 0.06 µL	20 µL: ± 0.3%; ± 0.06 µL	20 µL: ± 0.3%; ± 0.06 µL	25 µL: ± 0.3%; ± 0.075 µL	50 µL: ± 0.3%; ± 0.15 µL	100 µL: ± 0.2%; ± 0.2 µL	200 µL: ± 0.2%; ± 0.4 µL	200 µL: ± 0.2%; ± 0.4 µL	250 µL: ± 0.2%; ± 0.5 µL	500 µL: ± 0.2%; ± 1 µL	1.000 µL: ± 0.2%; ± 2 µL	2.000 µL: ± 0.2%; ± 4 µL	2.500 µL: ± 0.2%; ± 5 µL
Erreur de mesure systématique¹⁾	0.1 µL: ± 48%; ± 0.048 µL 0.25 µL: ± 12%; ± 0.03 µL 1.25 µL: ± 2.5%; ± 0.031 µL 2.5 µL: ± 1.4%; ± 0.035 µL	0.5 µL: ± 8%; ± 0.04 µL 1 µL: ± 2.5%; ± 0.025 µL 5 µL: ± 1.5%; ± 0.075 µL 10 µL: ± 1%; ± 0.1 µL	0.5 µL: ± 12%; ± 0.06 µL 1 µL: ± 8%; ± 0.08 µL 5 µL: ± 4%; ± 0.2 µL 10 µL: ± 2%; ± 0.2 µL	0.5 µL: ± 12%; ± 0.06 µL 1 µL: ± 8%; ± 0.08 µL 5 µL: ± 4%; ± 0.2 µL 10 µL: ± 2%; ± 0.2 µL	2 µL: ± 3.0%; ± 0.06 µL 10 µL: ± 1.0%; ± 0.10 µL 20 µL: ± 0.8%; ± 0.16 µL	2 µL: ± 5%; ± 0.10 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	10 µL: ± 3%; ± 0.3 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 0.8%; ± 0.8 µL	10 µL: ± 3%; ± 0.3 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 0.8%; ± 0.8 µL	10 µL: ± 3%; ± 0.3 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 0.8%; ± 0.8 µL	20 µL: ± 2.5%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.6%; ± 1.2 µL	30 µL: ± 2.5%; ± 0.75 µL 150 µL: ± 1%; ± 1.5 µL 300 µL: ± 0.6%; ± 1.8 µL	30 µL: ± 3%; ± 0.9 µL 150 µL: ± 1%; ± 1.5 µL 300 µL: ± 0.6%; ± 1.8 µL	30 µL: ± 3%; ± 0.9 µL 150 µL: ± 1%; ± 1.5 µL 300 µL: ± 0.6%; ± 1.8 µL	100 µL: ± 3%; ± 3 µL 500 µL: ± 1%; ± 5 µL 1.000 µL: ± 0.6%; ± 6 µL	250 µL: ± 4.8%; ± 1.2 µL 500 µL: ± 1.5%; ± 7.5 µL 1250 µL: ± 0.8%; ± 10 µL 2500 µL: ± 0.6%; ± 15 µL	500 µL: ± 2.4%; ± 12 µL 2500 µL: ± 1.2%; ± 30 µL 5.000 µL: ± 0.6%; ± 30 µL	1.000 µL: ± 3%; ± 30 µL 5.000 µL: ± 0.8%; ± 40 µL 10.000 µL: ± 0.6%; ± 60 µL	1 µL: ± 2.5%; ± 0.025 µL	2 µL: ± 2%; ± 0.04 µL	5 µL: ± 1.2%; ± 0.06 µL	10 µL: ± 1%; ± 0.1 µL	10 µL: ± 1.2%; ± 0.12 µL	20 µL: ± 0.8%; ± 0.16 µL	20 µL: ± 1%; ± 0.2 µL	25 µL: ± 1%; ± 0.25 µL	50 µL: ± 0.7%; ± 0.35 µL	100 µL: ± 0.6%; ± 0.6 µL	200 µL: ± 0.6%; ± 1.2 µL	200 µL: ± 0.6%; ± 1.2 µL	250 µL: ± 0.6%; ± 1.5 µL	500 µL: ± 0.6%; ± 3 µL	1.000 µL: ± 0.6%; ± 6 µL	2.000 µL: ± 0.6%; ± 12 µL	2.500 µL: ± 0.6%; ± 15 µL
Autoclavable	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes
Consumables	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®	epT.I.P.S.^®
Système ouvert (consommables de tiers)	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes	yes
Contenu de la livraison	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, O-ring tool	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, O-ring tool	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, O-ring tool	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, O-ring tool	Pipette, epT.I.P.S.^® Box 2.0 pipette tips, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, epT.I.P.S.^® pipette tips sample bag, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Filter sleeve, Filter cartridges (x10), Pipette wrench	Pipette, epT.I.P.S.^® pipette tips sample bag, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Filter sleeve, Filter cartridges (x10), Pipette wrench	Pipette, epT.I.P.S.^® pipette tips sample bag, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Filter sleeve, Filter cartridges (x10), Pipette wrench	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)	Pipette, Operating manual, Certificate, Adjustment seal for temporary adjustment, Adjustment seal for factory adjustment (x2), Grease for pipettes, Locking ring (to prevent spring action)

1)The listed values for 10%, 50%, and 100% of the nominal volume are based on tests complying with DIN EN ISO 8655, Parts 2 or 5. If listed, the smallest adjustable volume provides additional data.

Customer voices: Eppendorf Reference^® 2

“These pipettes are very easy to use. The adjustment lock is placed in a location where it is easy to use but so you don't inadvertently press it. The results we obtained were very consistent and very accurate. The pipette mechanism is very smooth and easy to control. They seem very rugged.”

Brad Stratton

Rieke Metals, USA

Write your own review!

Customer voices: Eppendorf Reference^® 2

“As regular users of laboratory equipment, we have come to rely heavily on the accuracy and ease of use provided by Eppendorf pipettes. This brand has become synonymous with precision and dependability, and our experience with their pipettes has undoubtedly reinforced this reputation. […] Eppendorf pipettes have proven to be exceptional tools in our lab. They offer a combination of precision, ease of use, and durability that sets them apart from other brands in the market.”

Jignesh Prajapati

Gujarat University, India

Write your own review!

Customer voices: Eppendorf Reference^® 2

“Accurate, precise, easy to use, and durable pipette. [Our Reference 2] pipette is over 10 years old with yearly maintenance and has only needed o-rings to be changed.”

Joanna Collier

Thermochem, USA

Write your own review!

Téléchargements: Eppendorf Reference^® 2

Prospectus

Elevate Your Laboratory Standards

ISO standards for calibration of liquid handling devices

PDF 1.2MB

Anglais

Prospectus

Eppendorf Pipette Multi-Packs (Starter Kits)

Pick your pack and save on Eppendorf pipettes with our multi-packs

PDF .7MB

Anglais

Guide de sélection

Get It Right! Selection Chart for Liquid Handling Instruments & Tips

Find the most suitable pipetting system for your lab applications

PDF 1.1MB

Anglais

Prospectus

Increase Your Pipetting Productivity Today

Higher throughput and increased reproducibility with Eppendorf multi-channel pipettes

You give your all to scientific research every day. Eppendorf liquid handling instruments help you grow beyond your limits

PDF 8.3MB

Anglais

Brochure

Pipette Service Done Right

Eppendorf Pipette Calibration

PDF 3.0MB

Anglais

Cela peut aussi vous intéresser

Eppendorf ColorTag pipette accessories, designed for optimal pipette identification and customization

ColorTag pipette marking rings

Flexible silicone marking rings that attach easily to any Eppendorf pipette and many other liquid handling instruments, for customizable labeling.

Eppendorf Research^® 3 neo

Pipette mécanique à coussin d’air adaptable, ergonomique et fiable. Bouton de commande plus court, ajustage rapide de volume et verrouillage de volume.

epT.I.P.S.^® BioBased

Les pointes de pipette sont fabriquées à partir de 100 % de plastique biosourcé dont la traçabilité est assurée jusqu’au déchet biologique. Disponible dans des volumes allant de 10 µL à 1 250 µL Long en Reloads pour une utilisation avec epT.I.P.S.^® Box 2.0. Parfait pour la microbiologie et la biologie moléculaire.

Move It® adjustable multi-channel pipettes from Eppendorf, with electronic and mechanical micropipettes shown

Move It^® - Pipettes à espacement de pointe ajustable

Pipettes multicanaux mécaniques (Research plus) ou électroniques (Xplorer plus) à espacement de pointe ajustable pour le transfert de plusieurs échantillons entre différents formats.

Eppendorf Xplorer® / Xplorer plus single- and multi-channel electronic pipettes

Eppendorf Xplorer^®/ Eppendorf Xplorer^® plus

Pipette à coussin d’air électronique pour une grande variété d’applications. Paramètres ajustables de manière intuitive pour un pipetage facile, rapide et précis.

Multipette^® M4

Pipette multi-distributrice mécanique à déplacement positif pour la distribution sans contamination de liquides aqueux, visqueux et volatils. Remplissage rapide des microplaques et des séries de récipients.

The Multipette® E3x, a digital repeater pipette by Eppendorf

Multipette^® E3/Multipette^® E3x

Pipette multi-distributrice électronique. Comme le M4, mais avec beaucoup plus d'options, p. ex pour les séries de dilution, le titrage, la distribution automatique dans les microplaques et les séries de récipients.

epMotion^® 96 Flex

Pipette électronique avancée semi-automatique à 96 canaux, avec des têtes de distribution interchangeables et un large choix de volumes. Sur mesure pour une manipulation fidèle des liquides dans les plaques 96 et 384 puits.

Vous vous apprêtez à quitter ce site.

Eppendorf Reference® 2