What does the term 2DMix-Control technology describe/stand for?

2DMix-Control technology stands for an orbital circular paths with a diameter of 3 mm and up to 3,000 rpm. 2DMix-Control technology generates excellent mixing performance, even for challenging samples. Detaild information can be found in the brochure "Ther value of Mixing".

What is the time setting increments for the ThermoMixer C and ThermoStat C?

Step times of 5 s to 99:30 h or unlimited. Step time range: Stepsize [or increment] 5 s - 1 min: 5 s 1 min - 20 min: 15 s 20 min - 1:00 h: 1 min 1:00 h - 10:00 h: 5 min 10:00 h - 99:30 h: 30 min Further information can be found in the operating manual.

The ThermoMixer C or ThermoMixer F starts to mix and count down before the set temperature is reached. How can that be changed, so that the ThermoMixer C or ThermoMixer F waits until the temperature is reached?

This can be changed in the menu of the device. The device must be changed to "Temp. control" mode than the mixer first starts to mix when the set temperature has been reached. Further information can be found in the operating manual.

Why is it recommended to reduce the speed to 1,000 rpm when using DWPs at temperatures of ≥80°C in the SmartBlock plates (5363 000.039) with the ThermoMixer C and ThermoMixer FP?

Polypropylene DWPs deform at temperatures ≥ 80°C. Deformed plates may become detached from the thermoblock or are more difficult to remove. If you are heating DWPs ≥ 80°C, do not exceed the mixing frequency of 1,000 rpm.

How to perform the cleaning and disinfection of MixMate, ThermoMixer F, ThermoMixer C, ThermoStat C, SmartBlocks, SmartExtender and ThermoTop?

Switch off the device, disconnect the mains/power plug and make sure that no liquid can get into the inside of the housing. When cleaning has been completed, the device should only be connected when it is fully dry on the inside and on the outside. Use lint-free cloth and soft bottle brush or cotton swabs for SmartBlocks and SmartExtender. Do not use any aggressive chemicals on the device or its accessories such as strong and weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or phenol. If the device is contaminated with aggressive chemicals, clean it immediately using a mild cleaning agent and wipe it off with dist. water afterwards. Recommended cleaning agents: mild, soap-based lab cleaner dist. water Recommended disinfectants: ethanol (70%) isopropanol (70%) Please follow the detailed safety instructions in the Operating Manual..

Can cell culture plates be used in the SmartBlock plates?

Cell culture plates comply with the SBS standard can be used in the SmartBlock plates. Temper polystyrene plates up to 70°C max. Further information can be found in the operating manual.

Is it possible to run more than one program in automatic succession on a ThermoMixer or ThermoStat C?

No. Each program has to be chosen and run separately. But the 4 possible steps within a program run in automatic succession.

Can PCR plates be used in SmartBlock plates respectively ThermoMixer FP?

SmartBlock plates and ThermoMixer FP (with the fixed SmartBlock plates) are dedicated for using MTP’s, DWP’s and also other skirted plates which meet the SBS standard. For optimal usage of PCR plates the SmartBlock PCR 96 and PCR 384 in combination with ThermoMixer C or ThermoStat C is the proper choice. These SmartBlocks possess conical bores which surround the conical wells of PCR plates properly for a perfect temperature transition.

Is it possible to use the Eppendorf ThermoMixer C, ThermoMixer F and ThermoStat C permanent?

Yes, this is possible. The customer has just to set the time to endless. But ice may form on the thermoblock if samples are tempered at low termperatures for a long time.

Why should I have my ThermoMixer serviced at regular intervals?

Eppendorf offers a selection of preventive maintenance services which ensure a consistent performance of the device and confidence in the results.

How often does my ThermoMixer need to be serviced?

This depends on how intensively it is used and varies depending on the load on the device. However, we recommend to have it serviced at least once a year.

What do you need to look out for before carrying out a service?

The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device. You should also ensure that the device has cooled down already.

What types of service programs are available for the ThermoMixer?

The available service programs can be found under the respective instrument in the Service & Support / Maintenance and Certification Services section.

What are the costs for the different ThermoMixer service programs?

The cost depends on the model and on the service that is performed. Please contact your local Eppendorf Service.

Please contact your local Eppendorf Service Team. You find the contact data on our homepage or in the information materials.

What is IQ or OQ and what do I need them for?

Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.

How often does the OQ need to be carried out for a ThermoMixer?

The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.

What does the temperature verification include and how often does it need to be carried out?

To ensure that your ThermoMixer delivers reproducible and correct results, temperature verification and adjustment - if required - are strongly recommended. Temperature verification is a very accurate and precise method and complies with all laboratory requirements with regard to documentation and detection in accordance with national and international standards.

How can temperature accuracy be verified?

The best temperature accuracy possible is ensured by the individual adjustment of each SmartBlock. The Eppendorf Temperature Verification System- Single Channel is used to check the temperature accuracy of the thermoblock. In combination with the temperature sensor for the Eppendorf ThermoMixer, the exact temperature in the thermoblock can be measured. You can find further information in the corresponding operating manual.

How can my device be cleaned and which cleaning agents and disinfectants can be used for cleaning and disinfection of ThermoMixer C, ThermoMixer F and ThermoStat C?

Switch off the device, disconnect the mains/power plug and make sure that no liquid can get into the inside of the housing. When cleaning has been completed, the device should only be connected when it is fully dry on the inside and on the outside. Do not use any aggressive chemicals on the device or its accessories such as strong and weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or phenol. If the device is contaminated with aggressive chemicals, clean it immediately using a mild cleaning agent. Use a lint-free cloth and a mild, soapy laboratory cleaner and distilled water. Clean the housing and the thermoblock regularly. Please refer to your operating manual for further information - Maintenance chapter

What types of training or online training do you offer to enable me to improve my skills?

Please visit the Eppendorf webpage about the Eppendorf Training Center or contact your local Eppendorf Service for further information and a quotation.

text.skipToContent text.skipToNavigation

CN | CNY

Sorry, we couldn't find anything on our website containing your search term.

Eppendorf ThermoMixer^® C

ThermoMixer C: SmartBlock, 1.5mL, total front

Mixing a low-volume sample within a 96 well plate

Eppendorf SmartBlock DWP 500 with white DWP

Eppendorf ThermoMixer C with ThemoTop for enhanced temperature accuracy and less condensation within sample tubes

Eppendorf Transfer_Rack_1.5/2.0 mL_to transfer samples from Eppendorf ThermoMixer C

Eppendorf SmartBlock removal by pressing the lever (Step 1)

Eppendorf SmartBlock removal by pressing the lever (Step 2)

Eppendorf SmartBlock removal by pressing the lever (Step 3)

ACT label of sustainability certification for Eppendorf ThermoMixer C

Eppendorf ThermoMixer_C with SmartBlock_15 mL_for sample heating and mixing

Eppendorf ThermoMixer_C with SmartBlock_PCR 96_for incubating PCR plates

An Eppendorf ThermoMixer heats/cools/shakes also larger vessels

ThermoMixer C SmartBlock: plate, total, angle

Eppendorf ThermoMixer C with SamrtBlock and lid

Eppendorf ThermoMixer C with lab scientist who changes the ThermoTop

Product Information

Discover our most versatile solution for mixing, heating, and cooling of samples. Accessories include a wide selection of SmartBlocks e.g., form-fi tting DWP-blocks for fast tempering of samples, a block for controlled, water-free cell thawing, a heated lid to prevent condensates inside vessel lids (ThermoTop^®), or the SmartExtender to incubate 1.5 ml tubes at a different temperature than the main block.

Show more Product Information

Learn more about sustainability at Eppendorf - incl. how to recognize a sustainable thermomixer

Request a demo

You will find additional download material at the bottom of this page

Single Devices (1)

Services (8)

Accessories (20)

1 Single Devices

Eppendorf ThermoMixer^® C

basic device without thermoblock
ACT, 220 – 240 V/50 – 60 Hz (CN)

More Product Details ...

Quantity

Check stock

Catalog no. 5382000074

Price

¥ 59,549.00

Inquire

Add to list

Show more Products

Added to Your Cart

Product Information

Technical Data

Applications

Features

You need everything? Discover our most versatile solution for mixing, heating, and cooling of samples – proven and tested in thousands of labs worldwide.

Learn more: Video – Versatility of the Eppendorf ThermoMixer^{^®}

• All-in-one versatile device: Mixing, heating, and cooling of 100 µL – 50 mL tubes, MTP/DWP/PCR-plates, or cryovials (water-free, automated cell-thawing)
• Optimized temperature transfer for plates: Dedicated form-fitting blocks for DWP (96 well, 500/1000 µl) and PCR plates (96/384 well)
• Block homogeneity assured: Serial number-specific temperature test certificate, block-specific calibration possible, and IQ/OQ GxP service available
• Improved mixing results: Up to 3,000 rpm at a wide 3 mm orbit (^2DMix-Control)
• Tool-free block exchange within seconds: Eppendorf QuickRelease function and automatic block recognition
• Condensation protection inside tubes and improved block homogeneity: Optional ThermoTop^® heated lid with block-type specific heating for SmartBlocks up to 2.0 mL
• Parallel incubation at a different temperature: Optional SmartExtender for up to 12 x 1.5 mL tubes e.g., for enzymatic reactions
• Speed up your tasks: 5 keys for common programs plus 15 additional, storable programs (freely definable, multi-parameter)
• Proven design for longevity: Robust design and LCD display – ready for teaching labs and reliable operation for years to come
• Supports sustainability targets: Sustainability score validated by NGO My Green Lab^® and certified with ACT^® label

Annoyed by uncomfortable handling?

Ergonomics goes far beyond the »ergonomically designed chair«. Eppendorf already started to optimize laboratory devices with regard to ergonomics in the early 1970s.
In 2003, we started the PhysioCare Concept^®, focusing on ergonomic liquid handling devices like our pipettes.
Nowadays, the Eppendorf PhysioCare Concept has been broadened to include further laboratory products as a holistic solution to harmonize the workflow in your laboratory with your health and well-being, e.g. for the Eppendorf ThermoMixer:
• Eppendorf QuickRelease for easy and fast block exchange
• Insulated SmartBlock for safe gripping / no burning of fingers
• Direct keys for convenient handling
• Small footprint to enable position in direct arm reach at your bench
• Standardized »user-interface concept« for intuitive handling of devices

Learn more: The Eppendorf PhysioCare Concept

Disposal of packaging

The packaging of the mixer contains different materials, this includes cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our mixer packaging cardboard material consists of ca. 60 % recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the thermomixer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend selecting a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.

Disposal of instrument
Our mixers last for many years, but if they need to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with electronics. Keeping it "local" reduces the impact of transportation, and the "certified" aspect is recommended due to the safe and sustainable removal of specific parts.

Decontamination
This piece of equipment was used in a laboratory and/or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/or waste officer. Check if your local recycling partner has special instructions and/or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance.

Read Less

Specifications	Eppendorf ThermoMixer^® C

ACT label	yes
Sample capacity	All common vessels and plate formats from 5 µL to 50 mL
Product type	ThermoMixer
Timer	5 sec to 99:30 h, continuous
Interfaces	USB interface
Power supply	220 – 240 V, 50 – 60 Hz
Max. power consumption	−
Dimensions (W × D × H)	20.6 × 30.4 × 13.6 cm / 8.1 × 12.0 × 5.4 in
Product weight	6.3 kg / 13.9 lb
Max. speed	3,000 rpm¹⁾
Temperature range	Min: 15 °C below RT, max: 100 °C¹⁾
Mixing frequency	300 – 3,000 rpm¹⁾
Mixing and vortexing radius	−
Temperature settings	1 °C / 100 °C
Mixing orbit	−
Temperature accuracy	Max. ±0.5 °C at 20 – 45 °C¹⁾

Eppendorf ThermoMixer^®
Heating rate	Max. 7 °C/min (when using SmartBlock plates)¹⁾
Cooling rate	Max. 2.5 °C/min between 100 °C and RT

1)depending on SmartBlock used

Downloads: Eppendorf ThermoMixer^® C

Flyer

Eppendorf ThermoMixer^® C

Our all-in-one versatile device for your everyday mixing and tempering tasks

PDF 2.2MB

English

Flyer

Eppendorf ThermoMixer^® C

我们的一体化多功能混匀仪设备，适用于您的日常混匀和温控任务

PDF 1.3MB

Chinese

Flyer

Take Full Advantage of Versatility

Missing a second incubation temperature for your Eppendorf ThermoMixer^®?

Eppendorf Temperature Control and Mixing Instruments

PDF 2.1MB

English

You might also consider

Eppendorf SmartBlock

SmartBlocks are sensor-controlled thermoblocks for ThermoMixer C and ThermoStat C. Easy to change and available in different formats.

ThermoTop^®

The ThermoTop limits condensation within sample tubes during temperature incubation when using ThermoMixer or ThermoStat.

SmartExtender

The SmartExtender provides a second independent temperature for incubation of 1.5 mL tubes when using ThermoMixer or ThermoStat.

Keep your samples securely cool withtemperature dependent colorchanging PCR cooler

PCR-Cooler & PCR-Rack

The PCR-Cooler provides a cooled 96 well rack for safe PCR preparation. A changing color code indicates the temperature range.

Eppendorf Conical Tubes 25 mL

The reduced height and wide opening gives easy sample access, reduced risk of cross-contamination of pipette and tube and safes freezer space up to 30 %. Available with snap cap and screw cap

Transparent Conical tubes, 15 mL and 50 mL

Eppendorf Conical Tubes 15 mL and 50 mL

High quality conical tubes 15 mL and 50 mL

Eppendorf Safe-Lock tubes - 0.5 mL, 1.5 mL and 2 mL, for all lab applications and centrifugation

Eppi^® – Eppendorf Safe-Lock^® Tubes

Eppi^® - Eppendorf Safe-Lock Tubes offer special protection against unintentional opening and completely eliminate any danger of leaks during incubation and storage

Twin.tec PCR plates offer ideal features for reproducible PCR

Eppendorf twin.tec^® PCR Plates LoBind^®

Special manufacturing technology combine the high quality and benefits of twin.tec PCR plate with low binding to maximize yield of target molecules. Automation friendly. Different formats available.

Eppendorf Deepwell Plates

High-quality, superior performance Eppendorf Deepwell Plates.

You are about to leave this site.

Eppendorf ThermoMixer® C