- Decontamination from the outside
- Cleaning and lubrication of dispensing head
- Checking and exchanging of 96 O-rings on tip cones
- Leak test with 50 µl + 300 µl, or 300 µl + 1000 µl tips
- Gravimetric calibration test of 6 volumes, 5 measurements per volume in 'as left' condition
- Photometric test with 2 volumes, 5 measurements per volume in 'as left' condition
- Issuing of calibration test report and calibration label in compliance with ISO 23783 regulations
- Please note: the next service due date will default to 12 months cycle unless otherwise specified/requested
MENU
RS | RSD
-
-
-
-
- Forum Labo 2025
- Advanced Therapies Week (ATW) 2025
- SLAS Europe 2025
- Bioprocessing Summit Europe 2025
- Medlab Middle East 2025
- SLAS International 2025
- Biologics World Nordics 2025
- ASIA LABEX: The Lab Show 2025
- BioProcess International Europe 2025
- ISEV 2025
- Future Labs Live 2025
- DataHow Symposium 2025
- Cell 2025
-
-
-
-
- Forum Labo 2025
- Advanced Therapies Week (ATW) 2025
- SLAS Europe 2025
- Bioprocessing Summit Europe 2025
- Medlab Middle East 2025
- SLAS International 2025
- Biologics World Nordics 2025
- ASIA LABEX: The Lab Show 2025
- BioProcess International Europe 2025
- ISEV 2025
- Future Labs Live 2025
- DataHow Symposium 2025
- Cell 2025
RS | RSD
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- IVD Products
- High-Speed and Ultracentrifuge Consumables
- Centrifuge Tubes
- Centrifuge Plates
- Device Management Software
- Sample and Information Management
You are about to leave this site.
Please be aware that your current cart is not saved yet and cannot be restored on the new site nor when you come back. If you want to save your cart please login in into your account.
No results found
Search Suggestions
epMotion® 96 Flex dispensing head calibration, 5 measurements per test volume (min, mid, max each with smaller and larger tip) with preventive maintenance
Product Information
in accordance with ISO 23783, as-left calibration - 6x5You will find additional download material at the bottom of this page
Features