Two types of 2 Liter clamps (ACE-2000S and M1190-9005) are offered. Which clamp fits which flasks?

For "Wide neck" Erlenmeyer flasks (DIN ISO 24450): ACE-2000S or M1190-9005. For "Narrow neck" Erlenmeyer flasks (DIN ISO 1773): M1190-9005 For Thomson Ultra YieldTM 2.5 L: M1190-9005 Further information on accessories are provided on Userguide for Shaker Accessories.

Why should I have my Orbital Shaker serviced at regular intervals?

As with all products with moving parts, wear and tear is inevitable and can affect how consistently the product operates over a long period of time. Eppendorf products are engineered to minimize wear and tear, but a periodic service allows early identification and tracking of excessive wear before product performance is outside of acceptable tolerances. Regular servicing may also be a regulatory requirement of our users.

How often does my orbital shaker need to be serviced?

Eppendorf recommends a service once every 12 months. However, the regulatory requirements of our users vary greatly and can often be more frequent.

How much are the different orbital shaker service programs?

The cost depends on the product variant and on the level of service that is required. Please contact your local Eppendorf Service centre for a personal quotation. www.eppendorf.com/contact

What is IQ or OQ and what do I need them for?

Installation and Operational Qualification; the Installation Qualification documents that the product has been delivered and installed in accordance with manufacturer recommendations and guidelines. The Operational Qualification checks the correct functioning of a device in accordance with manufacturer recommendations and guidelines (as such, it can only be provided by the equipment manufacturer). IQ/OQ is primarily required in organizations that implement quality management processes but is available to all users.

text.skipToContent text.skipToNavigation

RS | RSD

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

Lab shaker clamps and adhesive mats

Flask clamps for Eppendorf and New Brunswick lab shakers

Sticky pad 8x8 with hand holding erlenmeyer

Product Information

Eppendorf offers a wide range of shaker clamps to secure Erlenmeyer flasks to the universal platforms. To find the right clamps for other common flask types like Thomson Ultra Yield^® or Optimum Growth™, Tunair^®, Corning^® flasks and centrifuge tubes, TPP^® TubeSpin^® Bioreactors, DURAN^® Blue cap bottles or others, please refer to the "Shaker Accessory Guide" in the Download section below.

Show more Product Information

You will find additional download material at the bottom of this page

Product Information

Flask clamps are of a single piece stainless-steel construction (not spot welded or riveted) for added strength and safety. Clamps 2 L and above come with an extra girdle for added security when agitating flasks at high speeds. Flask clamps come complete with required screws, and are fitted with coiled wire springs for added stability at elevated speeds.