Centrifuge 5804/5804 R, a benchtop centrifuge renowned for its quality and reliability, offers you the most cost-effective solution for medium-throughput applications requiring speeds of up to 20,913 x g (14,000 rpm). Experience true versatility with a broad selection of rotors and adapters that accommodate tubes and bottles from 0.2 mL to 250 mL, as well as MTP, PCR and deep-well plates.
The swing-bucket rotor and adapters accommodate tubes and bottles from 0.2 mL to 250 mL whereas the fixed-angle rotors accomodate vessels from 0.2 mL to 85 mL. The plate rotor is ready for you to carry out centrifugation of all common types of multiwell plate, such as PCR, cell culture or deep-well plates.
MENU
DE | EUR
DE | EUR
-
- Benchtop Centrifuges
- Floor-Standing Centrifuges
- Refrigerated Centrifuges
- Microcentrifuges
- Multipurpose Centrifuges
- High-Speed Centrifuges
- Ultracentrifuges
- Concentrator
- High-Speed and Ultracentrifugation Consumables
- Accessories
- Tubes
- Plates
- Device Management Software
- Sample and Information Management
- IVD Products
No results found
Search Suggestions
Centrifuge 5804/ 5804 R - Multipurpose Centrifuge
Centrifuge 5804/5804 R benchtop centrifuges
Centrifuge 5804/5804 R für molekularbiologische Anwendungen mit mittlerem Durchsatz
Centrifuge 5804/5804 R – Centrifuge Rotor S-4-72 buckets and adapters are autoclavable
Rotor S-4-72 – Ausschwingrotor mit mittlerem Fassungsvermögen und Geschwindigkeiten von bis zu 3.234 × g (4.200 rpm)
Centrifuge 5804/5804 R – Rotor S-4-72
Der Eppendorf-Rotor S-4-72 für Centrifuge 5804/5804 R fasst alle gängigen Gefäßformate von 0,2 mL bis 250 mL
Centrifuge Rotor A-2-DWP with buckets for Centrifuge 5804/5804 R
Eppendorf-Rotor A-2-DWP für Centrifuge 5804/5804 R mit Kapazität für bis zu 2 × 5 Multiwell-Platten oder 2 × 2 Deepwell-Platten
Centrifuge Rotor FA–45–6–30 with QuickLock® lid mechanism
Eppendorf-Zentrifugenrotor FA-45-6-30 (6 × 50 mL) mit aerosoldichtem Eppendorf QuickLock®-Deckel
Eppendorf centrifuge rotor Rotor F-34-6-38 for Centrifuge 5804/5804 R
Centrifuge 5804/5804 R – Hochgeschwindigkeits-Zentrifugenrotor F-34-6-38 für molekularbiologische Anwendungen in Gefäßen von 0,2 mL bis 85 mL
Eppendorf Rotor FA-45-48-11 with Eppendorf QuickLock® technology
Eppendorf-Rotor FA-45-48-11 für 48 × 1,5/2-mL-Reaktionsgefäße mit aerosoldichtem QuickLock®-Rotordeckel für das sichere Zentrifugieren gefährlicher Proben
The Centrifuge 5804/ 5804 R is a non-automatic centrifuge for the separation of liquid substance mixtures from the human body and is specifically intended to be used as an accessory together with an in vitro diagnostic device and to enable its use according to its intended purpose. This product complies with the requirements of the EU In Vitro Diagnostics Regulation (IVDR) 2017/746. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.
The Centrifuge 5804/ 5804 R is a non-automatic centrifuge for the separation of liquid substance mixtures from the human body and is specifically intended to be used as an accessory together with an in vitro diagnostic device and to enable its use according to its intended purpose. This product complies with the requirements of the EU In Vitro Diagnostics Regulation (IVDR) 2017/746. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.
-
IVD
General Lab Product Version
Do I need IVD?
product.type.ivd.lightbox.content
Read more
Read less
Product Information
The high-speed benchtop centrifuge Centrifuge 5804/5804 R is suitable for medium-throughput molecular biology applications. It handles all common tube formats from 0.2 mL to 250 mL as well as plates, offering a with high versatility thanks to a broad range of rotors and adapters.
You will find additional download material at the bottom of this page
Products (2)
Sets & Bundles (4)
epServices (26)
Rotors (14)
Accessories (2)
2 Products
|
|
Show more Products
Added to Your Cart
Product Information
Technical Data
Features
Product Information
Rotor S–4–72
Use Eppendorf swing-bucket centrifuge rotor Rotor S–4–72 for medium-throughput molecular applications. Offering speeds of up to 3,234 x g (4,200 rpm) and a broad range of adapters, it easily handles all common tube formats from 0.2 mL to 250 mL. Its aerodynamic round bucket design saves up to 48 % energy compared to Rotor A–4–62. Buckets and adapters are autoclavable.
Rotor for high-speed centrifugation
Eppendorf Rotor FA–45–6–30 (6 x 50 mL) with Eppendorf QuickLock® lid can be used at a maximum speed of 20,130 x g (12,100 rpm) in Centrifuge 5810 R and 16,639 x g (11,000 rpm) in the 5804, 5804 R and 5810. It is aerosol-tight for safe centrifugation of hazardous samples and uses Eppendorf QuickLock technology for fast rotor lid locking. With a low rotor weight of 3.2 kg, it improves handling to make everyday work more comfortable. A 45° borehole angle minimizes pellets smear along the tube wall.
Proud Owner of an Eppendorf product? Already registered?
Did you know that if you register your Eppendorf product with us you will get the following?
• 100 epPoints® (for each product you register) to redeem in our rewards shop
• Additional 3 months warranty when you register a Centrifuge, Shaker, CO2 Incubator or Cycler
• Entry in an exclusive Eppendorf prize draw (for each product you register)
• Get your personal product story to be posted on the Eppendorf website
Getting started is super easy! Either -
1. Download the Eppendorf App, scan and register OR
2. Visit our webpage, log onto your myEppendorf account and enter the product serial number
More information:www.eppendorf.com/productregistration
"
Disposal of packaging
The packaging of the centrifuge contains different materials, this can include a wooden pallet, cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our centrifuge packaging cardboard material consists of ca. 50% recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the freezer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend to select a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.
Disposal of instrument
Our centrifuges last for many years, but if they need to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with active cooling. Keeping it “local“ reduces the impact of transportation, and the „certified“ aspect is recommended due to the safe and sustainable removal and recycling of the cooling liquids if it is a refrigerated centrifuge.
Decontamination
This piece of equipment was used in a laboratory and/ or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/ or waste officer. Check if your local recycling partner has special instructions and/ or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance."
End-of-Life
Disposal of packaging
The packaging of the centrifuge contains different materials, this can include a wooden pallet, cardboard, a plastic dust cover, and some foam parts. Recycling of materials becomes more and more important every day: Are you aware that nearly all cardboard material is recycled in Europe? Our centrifuge packaging cardboard material consists of ca. 50% recycling material. Please support the global sustainability initiative of recycling valuable raw material by also collecting the freezer cardboard packaging material and disposing of it in the appropriate collection container at your organization. In respect to the plastic dust cover made of LD-PE and the foam parts, we recommend to select a dedicated recycling partner where PE material can be recycled. We suggest you contact your local waste hauler or facility management team to understand the available recycling options for your organization.
Disposal of instrument
Our centrifuges last for many years, but if they need to be replaced, we kindly ask you to fulfill local requirements for disposal of these instruments. We strongly recommend a certified local recycling partner with experience in instruments with active cooling. Keeping it “local“ reduces the impact of transportation, and the „certified“ aspect is recommended due to the safe and sustainable removal and recycling of the cooling liquids if it is a refrigerated centrifuge.
Decontamination
This piece of equipment was used in a laboratory and/ or was used to handle biological samples. Please keep in mind to adequately decontaminate the equipment which needs to be disposed. Check local requirements. For more information, get in contact with your local biosafety officer and/ or waste officer. Check if your local recycling partner has special instructions and/ or documentation requirements. You may also use the Eppendorf decontamination form sheet as guidance."
Read More
Read Less
Technical Data
| Specifications | 5804 | 5804 R |
|---|
| Max. RCF | 20913 × g | 20913 × g |
| Max. RCF with fixed-angle rotor | 20913 × g | 20913 × g |
| Max. RCF with swing-bucket rotor | 4500 × g | 4500 × g |
| Max. RCF with plate rotor | 2250 × g | 2250 × g |
| Speed | 200 – 14,000 rpm (10 rpm steps) | 200 – 14,000 rpm (10 rpm steps) |
| Product type | Centrifuges | Centrifuges |
| Rotors available | 12 | 12 |
| Max. capacity | 4 × 250 mL/ 2 × 5 MTP | 4 × 250 mL/ 2 × 5 MTP |
| Acceleration/braking ramps | 10/10 | 10/10 |
| Number of programs | 35 user-defined programs | 35 user-defined programs |
| Timer | 1 min to 99 min, with continuous run function, short-spin | 1 min to 99 min, with continuous run function, short-spin |
| Noise level | < 62 dB(A) | < 58 dB(A) |
| Power supply | 230 V, 50 – 60 Hz | 230 V, 50 – 60 Hz |
| Max. power consumption | 900 W | 1650 W |
| Dimensions (W × D × H) | 46,6 × 55,0 × 33,7 cm / 18,4 × 21,7 × 13,3 in | 63,4 × 55,0 × 34,2 cm / 25,0 × 21,7 × 13,5 in |
| Footprint (dimensions w/o front panel, WxD) | 47 × 50 cm | 64 × 50 cm |
| Product weight | 55 kg / 121 lb | 80 kg / 176 lb |
| Height (with open lid) | 74 cm / 29 in | 74 cm / 29 in |
| Cooling | non-refrigerated | refrigerated |
| Temperature range | – | -9 °C to 40 °C |
|
Max. capacity |
||
| Conical tubes | 40 × 15 mL/ 16 × 50 mL | 40 × 15 mL/ 16 × 50 mL |
| Plates | 10 × MTP/ 2 × DWP | 10 × MTP/ 2 × DWP |
| Blood collection tubes | 56 × 13 mm/ 52 × 16 mm | 56 × 13 mm/ 52 × 16 mm |
|
Noise level |
||
| Rotor FA-45-6-30 (6×50 mL) | <55 dB(A) | <54 dB(A) |
| Rotor S-4-72 (4×250 mL) | <62 dB(A) | <58 dB(A) |
Features
- Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 250 mL
- Plate rotor for centrifugation of all types of MTP, PCR, cell culture, or Deepwell Plates
- Fixed-angle rotors for high-speed applications in tubes from 0.2 mL to 85 mL
- High centrifugation speed of up to 20.913 × g (14,000 rpm)
- Centrifuge lid with soft-touch lid closure
- Low access height of 29 cm for easy loading and unloading of samples
- Quiet operation to improve your work environment
- Compact footprint saves valuable bench space
- Automatic rotor recognition and imbalance detection for maximum operational safety
Additional features of refrigerated Centrifuge 5804 R
- Temperature range from -9 °C to 40 °C
- FastTemp function for fast pre-cooling
- Continuous cooling maintains a constant temperature after the run has been completed – your samples stay cool
- ECO shut-off engages after 8 hours of non-use to reduce energy consumption and to extend compressor life
- Dynamic compressor control (DCC) technology for optimized cooling performance
