text.skipToContent text.skipToNavigation
No results found
Search Suggestions

epMotion® ReservoirRacks and Modules

Product Information

The Eppendorf Reservoirs are the perfect vessels for the provision of 10 to 400 mL liquid, and they permit the use of single channel and multichannel dispensing tools. The tapered shape of the reservoirs allows utilization of the entire liquid volume with minimal residue. Moreover, the reservoirs may be temperature-controlled inside the racks to allow cooling or warming of liquids, for example, when PCR-mastermixes or cell culture media are used.
Our Reservoir Racks hold reaction vessels of different sizes, and they are tempered in order to protect valuable samples or carry out reactions directly inside the Reservoir Rack.

You will find additional download material at the bottom of this page

Products (24)


  • small-volume container for reagent presentation on the epMotion®, can only be inserted with the Reservoir Rack; production batch testing, certified
  • 10 mL, PCR clean, 10 × 5 reservoirs in the bag, polypropylene (PP)
More Product Details ...
Catalog no. 0030126521

  • large-volume container for reagent presentation on the epMotion®, can only be inserted with the Reservoir Rack; production batch testing, certified
  • 30 mL, PCR clean, 10 × 5 reservoirs in the bag, polypropylene (PP)
More Product Details ...
Catalog no. 0030126505

  • large-volume container for reagent presentation on the epMotion®, can only be inserted with the Reservoir Rack; production batch testing, certified
  • 100 mL, PCR clean, 10 × 5 reservoirs in the bag, polypropylene (PP)
More Product Details ...
Catalog no. 0030126513

  • low dead volume reservoir, single well with 96 cavities, PCR clean, 4 × 5 reservoirs
  • 195 mL, polypropylene (PP)
More Product Details ...
Catalog no. 0030126556

  • large-volume container for reagent presentation on the epMotion®
  • 10 reservoirs, 400 mL each, autoclavable, polypropylene (PP)
More Product Details ...
Catalog no. 5075751364

  • for epT.I.P.S.® Motion Reloads
More Product Details ...
Catalog no. 5075751399

  • enables positioning epT.I.P.S.® Motion Reload trays above a rack of epT.I.P.S.® Motion and thus doubles the tip capacity in an ANSI/SLAS position
  • reusable and autoclavable, epBlue 40.7 or higher required
More Product Details ...
Catalog no. 5075751879

  • for use with epMotion® ReservoirRacks, for distributing samples and reagents for NGS-specific applications, space for 20 x ILMN tubes, 4 x Eppendorf Tubes® 5.0 mL, 4 x Eppendorf Tubes 1.5 mL
More Product Details ...
Catalog no. 5075751917

  • for use with epMotion® ReservoirRacks, for providing up to 16 epT.I.P.S.® Motion per module and up to 7 modules per ReservoirRack (112 tips in total), set consisting of 7 modules
More Product Details ...
Catalog no. 5075751950

  • to retrofit the 1.5/2.0 mL thermoracks for use with 0.5 mL vessels
  • 25 pcs.
More Product Details ...
Catalog no. 5075772000

Product Information

Features

The Eppendorf Reservoirs are the perfect vessels for the provision of 10 to 400 mL liquid, and they permit the use of single channel and multichannel dispensing tools. The tapered shape of the reservoirs allows utilization of the entire liquid volume with minimal residue. Moreover, the reservoirs may be temperature-controlled inside the racks to allow cooling or warming of liquids, for example, when PCR-mastermixes or cell culture media are used.
Our Reservoir Racks hold reaction vessels of different sizes, and they are tempered in order to protect valuable samples or carry out reactions directly inside the Reservoir Rack.

Downloads: epMotion® ReservoirRacks and Modules

Content

Does a service carried out by Eppendorf meet the GMP requirement?

Eppendorf offers global certification services which comply with FDA 21 CFR Part 11, EU GMP Annex 11, GLP and GAMP®5 to ensure a consistent, standardized operation. We also enable an uncomplicated validation from the implementation to the shutdown by providing support for the installation und operational qualifications (IQ/OQ) of the device and with the software. The entire qualification is documented in detail and the operator’s personnel is qualified and certified in intensive training sessions.

How much are the different epMotion service programs?

How often do dispensing tools need to be calibrated?

How often does my epMotion need to be serviced?

How often does the OQ need to be carried out for an epMotion?

What do you need to look out for before carrying out a service?

What is IQ or OQ and what do I need them for?

What types of service programs are available for epMotion?

What types of training or online training do you offer to enable me to improve my skills?

Which consumables should be replaced at regular intervals?

Who is my local service contact?

Why can the dispending tool be calibrated without the user unit ?

Why do the dispensing tools of my epMotion need to be calibrated?

Why should I have my epMotion serviced at regular intervals?