MY | MYR
No results found
Search Suggestions
Multipette® E3
Multipette E3 frontal
Multipette E3
Multipette_REG_ E3/E3x multi-dispensers are ideal to quickly fill plates
Lightweight and ergonomic, the Multipette® E3 or E3x electronic multi-dispenser pipette is the ideal solution for filling plates or large series of tubes.
The well-organized display of the Multipette_REG_ E3/E3x electronic multi-dispenser pipette from Eppendorf
The Multipette® E3/E3x multi-dispenser pipettes have several functions e.g. for dilution series, titration, automatic dispensing into microplates and vessel series.
The range of Combitips_REG_ advanced dispenser tips offer a wide spectrum of possibilities
Combitips® advanced pipette tips are perfectly designed to work with the Multipette® line-up from Eppendorf and are available in 9 different volume sizes (0.1 mL to 50 mL).
Pipette Holder 2 with a Multipette_REG_ E3x multi-dispenser (repeater pipette) from Eppendorf
The Multipette® E3/E3x electronic multi-dispenser pipette can be easily mounted on a wall.
The Pipette Carousel 2 holding Eppendorf Xplorer_REG_, Multipette_REG_ E3x and Eppendorf Research_REG_ plus pipettes
The Eppendorf Pipette Holder System stores all current Eppendorf pipettes (including the Multipette®) and most of their predecessors.
Multipette_REG__NBSP_E3x Electronic Multi-Dispenser Held By Scientist (Product Close-Up)
With low weight, an ideal hand balance and easy-to-reach operating buttons, the Multipette® E3x electronic multi-dispenser is highly ergonomic
Female scientist using a Multipette_REG__NBSP_E3x multi-dispenser to quickly fill a microplate
The Multipette® E3(x) electronic positive displacement dispenser pipettes are ideal for stress-free, long series repetitive dispensing due to their lightweight, ergonomic design, and easy, motor driven action which reduces fatigue and the risk of repetitive strain injuries
Fill microplates with ease with the Multipette_REG__NBSP_E3x electronic multi-dispenser from Eppendorf
While the Multipette E3 already meets many application needs with its three main operating modes Dispensing, Automatic Dispensing and Pipetting, the Multipette E3x comes with four additional modes: Sequential Dispensing, Aspiration, Aspiration/Dispensing, and Titration
Easily update the software of your Multipette_REG__NBSP_E3(x) with the Eppendorf Pipette Software Update Tool
Multipette® E3x connected to a laptop to run a software update
Using the Multipette_REG__NBSP_E3x repeater pipette in the lab
Simply fill the tip once and accurately dispense up to 100 times without a refill using the Repeater® E3/E3x electronic multi-dispenser pipettes
Multipette E3 pipette
Independent sustainability certification needed? The ACT certification of My Green Lab for Multipette E3 pipette
Eppendorf PhysioCare Concept_REG_ - Logo
Eppendorf lab products were designed according to the criteria of the Eppendorf PhysioCare Concept® to minimize operator strain and fatigue.
Product Information
- 1-channel
- 1 µL – 50 mL
- incl. charging cable and Combitips® advanced assortment pack (1 tip of each size)
-
Easily update the firmware of your electronic pipette with our Pipette Software Update Tool
-
Learn more about sustainability & ergonomics at Eppendorf
-
Combitips® Selection Guide
-
Improve your skills with our available training
You will find additional download material at the bottom of this page
Pipette Tips (31)
Accessories (7)
Spare Parts (3)
epServices (11)
31 Pipette Tips
Price
RM 928.00
|
Price
RM 609.00
|
Price
RM 1,212.00
|
Price
RM 832.00
|
Price
RM 609.00
|
Price
RM 1,212.00
|
Price
RM 832.00
|
Price
RM 609.00
|
Price
RM 1,212.00
|
Price
RM 832.00
|
Added to Your Cart
Technical Data
Features
| Specifications | Multipette® E3 - 4987000010 |
|---|
| Product type | Dispensers |
| Pipetting type | Positive displacement system |
| Number of channels | 1-channel |
| Volume range | 1 µL – 50 mL |
| Operating mode | electronic |
| Random measurement error | see Combitips advanced |
| Systematic measurement error | see Combitips advanced |
| Display languages | 9 languages |
| Autoclavable | no |
| Power supply | 100 – 240 V ±10 %, 50 – 60 Hz |
| Battery type | Rechargeable li-ion |
| Consumables | Combitips® advanced, ViscoTip® |
| Open system (third party consumables) | no |
| Delivery content | Multi-Dispenser, Power supply with plug adapters, Operating manual, Short instructions, Combitips® advanced assortment pack (1 tip of each size), ViscoTip |
Downloads: Multipette® E3
Filter
Reset all
Language (1)
