Missing a second temperature for an incubation at 37 °C or 95 °C at your Eppendorf ThermoMixer?
The Eppendorf SmartExtender offers a comfortable incubation tool which can easily be used as an add-on to your existing Eppendorf SmartBlocks and the Eppendorf ThermoMixer C/Fx as well as Eppendorf ThermoStat C. Up to 12 vessels (1.5 mL) can be heated up for a higher throughput and higher flexibility in your lab. The independent heating function for the second temperature enables a parallel usage of an Eppendorf SmartBlock and the SmartExtender. The Eppendorf SmartBlock at the center can still be used for heating, cooling, and mixing.
MENU
AR | ARS
AR | ARS
You are about to leave this site.
Please be aware that your current cart is not saved yet and cannot be restored on the new site nor when you come back. If you want to save your cart please login in into your account.
No results found
Search Suggestions
SmartExtender
Additional 1.5 mL tubes can be heated with the Smartextender
Space for up to 12x additional 1.5 mL vessels needed? Expand your possibilities with the Eppendorf SmartExtender
SmartExtender w/o vessels
Eppendorf SmartExtender: Space for up to 12x 1.5 mL vessels
ThermoMixer C SmartExtender 45°
Further temperature needed? Eppendorf ThermoMixer C with SmartBlock PCR and SmartExtender - 2 different vial formats and two different temperatures in one instrument
Easy installation on Eppendorf ThermoMixer
Easy set-up of Eppendorf SmartExtender: Flexible usage in parallel to SmartBlock
Removing tube from incubation step
Take advantage of further 12 positions for 1.5 mL vessels: Independent heating by the Eppendorf SmartExtender
Eppendorf ThermoMixer C with SmartExtender
Different volume and temperature needed? Eppendorf ThermoMixer C with SmartBlock PCR and SmartExtender
Ready for tubes and plate in parallel
Further formats and temperature needed? Eppendorf ThermoMixer C with SmartBlock plates and SmartExtender
Product Information
Do you need incubation time for your enzymatic reactions?The Eppendorf SmartExtender offers a comfortable incubation tool which can easily be used as an add-on to your existing SmartBlocks and the Eppendorf ThermoMixer® C/Fx as well as ThermoStat C.
You will find additional download material at the bottom of this page
Products (1)
1 Products
|
Show more Products
Added to Your Cart
Product Information
Features
Product Information
Set-up
The SmartExtender can easily be installed - free-of-tools and within seconds.
Read More
Read Less
Features
- Independent temperature set-up for parallel application
- Up to 12 × 1.5 mL vessels
- Temperature range from 3 °C above room temperature to 110 °C
- Active heating only
- Compatible with Eppendorf ThermoMixer C and Fx as well as ThermoStat C
- Compatible to all Eppendorf SmartBlocks
- Firmware update needed
