Two types of 2 Liter clamps (ACE-2000S and M1190-9005) are offered. Which clamp fits which flasks?

For "Wide neck" Erlenmeyer flasks (DIN ISO 24450): ACE-2000S or M1190-9005. For "Narrow neck" Erlenmeyer flasks (DIN ISO 1773): M1190-9005 For Thomson Ultra YieldTM 2.5 L: M1190-9005 Further information on accessories are provided on Userguide for Shaker Accessories.

Why should I have my Orbital Shaker serviced at regular intervals?

As with all products with moving parts, wear and tear is inevitable and can affect how consistently the product operates over a long period of time. Eppendorf products are engineered to minimize wear and tear, but a periodic service allows early identification and tracking of excessive wear before product performance is outside of acceptable tolerances. Regular servicing may also be a regulatory requirement of our users.

How often does my orbital shaker need to be serviced?

Eppendorf recommends a service once every 12 months. However, the regulatory requirements of our users vary greatly and can often be more frequent.

How much are the different orbital shaker service programs?

The cost depends on the product variant and on the level of service that is required. Please contact your local Eppendorf Service centre for a personal quotation. www.eppendorf.com/contact

What is IQ or OQ and what do I need them for?

Installation and Operational Qualification; the Installation Qualification documents that the product has been delivered and installed in accordance with manufacturer recommendations and guidelines. The Operational Qualification checks the correct functioning of a device in accordance with manufacturer recommendations and guidelines (as such, it can only be provided by the equipment manufacturer). IQ/OQ is primarily required in organizations that implement quality management processes but is available to all users.

text.skipToContent text.skipToNavigation

CA | CAD

Sorry, we couldn't find anything on our website containing your search term.

Pinces pour agitateur de laboratoire et tapis adhésifs

Flask clamps for Eppendorf and New Brunswick lab shakers

Sticky pad 8x8 with hand holding erlenmeyer

Informations produit

Eppendorf offre un grand choix de pinces pour agitateur afin de fixer de nombreux flacons Erlenmeyer aux plateformes universelles. Pour trouver les bonnes pinces pour d'autres types de flacons conventionnels comme les flacons et tubes de centrifugeuse Thomson Ultra Yield^® ou Optimum Growth™, Tunair^®, Corning^®, les bioréacteurs TPP^® TubeSpin^®, les flacons à capuchon bleu DURAN^® ou autres, veuillez consulter le « Guide des accessoires pour agitateur » dans la rubrique Téléchargement ci-dessous.

Afficher plus d’informations produit

Click to customize and configure your universal platform accessories

Vous trouverez plus d’informations à télécharger au bas de cette page

Informations produit

Les pinces sont formées d'une seule pièce en acier inoxydable (ni soudage par points ni rivetage) pour plus de solidité et de sécurité. Les pinces de 2 L et plus disposent d'une attache supplémentaire pour maintenir le flacon en place lors d'une agitation à haute vitesse. Les pinces pour flacons sont livrées avec les vis nécessaires et sont logées dans des ressorts pour une plus grande stabilité à haute vitesse.