Are start and end position of the SmartBlocks the same?

No. Start and end position are not identical.

How can the temperature accuracy be verified?

The best possible temperature accuracy can be guaranteed by individually adjusting a SmartBlock. Optimized temperature control for each block type keeps temperature overshoots and deviations caused by external interferences to a minimum. To guarantee optimal performance over the entire period of use, Eppendorf offers a preventive maintenance program and certification services: your Eppendorf ThermoMixers, ThermoStat C as well as the SmartBlocks are regularly cleaned, checked and adjusted. Additional information is available at: https://www.eppendorf.com/epservices . Customers can also verify the temperature accuracy by themself. Eppendorf provides for that purpose the Temperature Verification System – Single Well for Eppendorf Mastercyclers (0056 000.003) in combination with the 384 well Sensor (0056 002.006).

Can cell culture plates be used in the SmartBlock plates?

Also cell cultuture plates can be used in the SmartBlock plates in so far the dimensions of the plate comply to the SBS standard.

Is it possible to put the SmartBlocks for a rapid cool down into a -20°C freezer?

The SmartBlocks can be used at ambient temperatures of 5°C – 40°C and can be cooled appropriate. Cooling down of SmartBlocks in a freezer should not be done.

Which SmartBlocks and vessels can be used with ThermoMixers F?

The ThermoMixers F possess a fix installed SmartBlock and can only be used with the appropriate microtest tubes or plates, such as MTP’s, DWP’s or skirted plates complying the SBS standard. For using PCR plates our SmartBlocks PCR 96 and PCR 384 in combination with ThermoMixer C is the proper choice.

Do the IsoRacks fit upon the SmartBlocks for microreaction tubes (0.5 mL; 1.5 mL; 2.0 mL)?

No. The IsoRacks fit only upon the Thermoblocks for the older devices Thermomixer comfort, Thermomixer compact & ThermoStat plus.

Can PCR plates be used in SmartBlock plates respectively ThermoMixer FP?

SmartBlock plates and ThermoMixer FP (with the fixed SmartBlock plates) are dedicated for using MTP’s, DWP’s and also other skirted plates which meet the SBS standard. For optimal usage of PCR plates the SmartBlock PCR 96 and PCR 384 in combination with ThermoMixer C or ThermoStat C is the proper choice. These SmartBlocks possess conical bores which surround the conical wells of PCR plates properly for a perfect temperature transition.

Smart Block cryo Thaw on ThermoMixer C - What is the ‘Thawing cells’ program?

The 'Thawing cells' program is an optimized program to thaw mammalian cells in 1.8-2.0 mL cryovials: reproducibly contamination free standardized It is a ready-to use program, in most cases no changes are required. The pre-set time is 3 minutes (can be extended up to 5 minutes), the pre-set mixing frequency is 500 rpm (can be adapted between 300 – 800 rpm), the temperature profile is fixed. The settings are based on tests with standard mammalian cell lines (CHO, HEK, S16) up to highly sensitive stem cells (hiPSCs) at tested conditions with 2.0 mL cryovials / 1.0 mL fill (1 – 5 vials in parallel). Other volumes or more vials may require an adaption of thawing time. Further information can be found in the Application Note 437 .

What is the difference between the SmartBlock cryo thaw and the SmartBlock cryo?

The 'SmartBlock cryo thaw' replaces the 'SmartBlock cryo'. Newly implemented is an automatic function for thawing cells (program 'Thawing cells') which is available in combination with the ThermoMixer C.

Is it possible to use the SmartBlock cryo thaw with the ThermoStat C?

The SmartBlock cryo thaw is still compatible with the ThermoStat C. However, the automatic thawing function 'thawing cells' is limited to the ThermoMixer C as it requires mixing.

The ThermoMixer C does not show the program ‘Thawing cells’ when inserting the SmarBlock cry thaw. Why?

The software version 3.5.0 or higher is required on the ThermoMixer C to operate the program 'Thawing cells'. How to upgrade the software is described in the operating manual.

Is it possible to use the SmartExtender with the SmartBlock cryo thaw?

The Smart Extender can be used with the SmartBlock cryo thaw, but not in parallel a 'Thawing cells' program is running. In case the user is operating the SmartExtender and intends to start the thawing procedure, the user is informed by a message with the option to stop the SmartExtender and vice versa. There is no automatic stop or re-start of the running program to not disturb the application.

SmartBlock cryo thaw - Does the mixing during the thawing program harm the cells?

No, in opposite, a slight mixing (500 rpm paired with a small 3 mm orbit) serves to distribute the temperature in the vial evenly reduces temperature gradients and inhomogeneous warming of cells by preventing sedimentation Reproducibility and confirm the suitability of the thawing method has been proven with: in-vial temperature measurements analyzing post-thawing cell viability further downstream tests (confirming pluripotency for stem cells). Further information can be found in the Application Note 437 (https://www.eppendorf.com/ThermoMixer)

Is it possible to use former SmartBlock cryo with the program ‘thawing cells’?

No, the program 'thawing cells' is limited to the SmartBlock cryo thaw.

text.skipToContent text.skipToNavigation

CA | CAD

Aucun résultat trouvé

Chercher des suggestions

Familles de Produits

Show all Product Families ()

Article

Show all Articles ()

Contenu

Show all Content ()

Eppendorf SmartBlock

Eppendorf ThermoStat C with selection of different Smartblocks

Eppendorf SmartBlock removal by pressing the lever (Step 1)

Eppendorf SmartBlock removal by pressing the lever (Step 2)

Eppendorf SmartBlock removal by pressing the lever (Step 3)

Eppendorf SmartBlock for 24 x 1.5 mL vessels

Eppendorf SmartBlock for 24 x 2.0 mL vessels

Eppendorf SmartBlock for 8 x 5.0 mL vessels

Eppendorf SmartBlock for 8 x 15.0 mL vessels

Eppendorf SmartBlock for 4 x 50.0 mL vessels

Adapter for 25 mL conical tubes to be used in Eppendorf ThermoMixer C

Eppendorf SmartBlock for 24 x 12 mm vessels

Eppendorf SmartBlock for 24 x cryo vessels with several cryovials

Eppendorf SmartBlock DWP 500 with white DWP

Eppendorf SmartBlock DWP 1000 with DWP at bench

Eppendorf SmartBlock for plates incl white-blue DWP

Eppendorf SmartBlock for 96-well PCR plates with blue 96-well semi-skirted PCR plate

Eppendorf SmartBlock for 384-well PCR plates with red PCR plate

Eppendorf Transfer_Rack_1.5/2.0 mL_to transfer samples from Eppendorf ThermoMixer C

Set of Eppendorf SmartBlocks with ThermoTop

Informations produit

Interchangeable en quelques secondes.
Ces SmartBlocks contrôlés individuellement par capteur constituent votre solution pour maintenir des températures précises et homogènes. La vaste gamme de ces thermoblocs polyvalents pour tous les récipients de laboratoire courants permet de réaliser un large éventail d’applications, pour une utilisation avec Eppendorf ThermoMixer^® C (chauffage/refroidissement et agitation) et ThermoStat C (chauffage/refroidissement).

Afficher plus d’informations produit

Vous trouverez plus d’informations à télécharger au bas de cette page

Informations produit

Données techniques

Caractéristiques

Vous souhaitez utiliser des plaques et des tubes de tailles différentes pour vos flux de travaux ?
La flexibilité n'a jamais été aussi facile. L'Eppendorf propose une large gamme de Eppendorf SmartBlocks pour les tubes de 0,2 mL à 50 mL ainsi que les plaques (plaques MTP, DWP et PCR 96 / 384) à utiliser avec l'Eppendorf ThermoMixer^® C et le ThermoStat C. Tous les Eppendorf SmartBlocks sont équipés d'un système unique Eppendorf QuickRelease qui facilite et accélère le changement de bloc.
Pour un montage et un transfert de température parfaits, nous recommandons d'utiliser les Eppendorf Deepwell Plates avec l'Eppendorf SmartBlock DWP 500 et l'Eppendorf SmartBlock DWP 1000 correspondant. Veuillez noter que l' Eppendorf SmartBlock DWP 500 et l' Eppendorf SmartBlock DWP 1000 ne peuvent être utilisés qu'avec les Eppendorf Deepwell Plates.

Pas d’outils sous la main ?

Les Eppendorf SmartBlocks se changent facilement. Il suffit d’appuyer sur le levier à l’avant pour retirer le bloc.–Cette procédure est ultra rapide, car aucun outil n’est requis.

Lire plus

Lire moins

Caractéristiques	SmartBlock 0,5 mL	SmartBlock de 1,5 mL	SmartBlock 2.0 mL	SmartBlock 5 mL	SmartBlock 15 mL	SmartBlock 50 mL	SmartBlock PCR 96	SmartBlock PCR 384	SmartBlock plates	SmartBlock DWP 500	SmartBlock DWP 1 000	SmartBlock cryo thaw	SmartBlock 12 mm

ThermoTop	oui	oui	oui	−	−	−	oui	oui	oui	oui	oui	non	−
Capacité d'échantillonnage	24 × microtubes (0,5 mL)	24 × microtubes (1,5 mL)	24 × microtubes (2,0 mL)	8 × 5 mL	8 × tubes coniques de 15 mL	4 × tubes coniques de 50 mL	1 plaque PCR 96	1 plaque PCR 384	1 × Plaque Micro Test / 1 × plaque deepwell	Eppendorf Deepwell Plates 96/500 µL	Eppendorf Deepwell Plates 96/1 000 µL	24 × cryotubes (1,5/2,0 mL)	24 × microtubes, diamètre de 12 mm
SmartExtender	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui
ThermoMixer C / ThermoStat C	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui	oui
Temp. max.	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	100 °C	110 °C¹⁾	110 °C¹⁾
Couvercle²⁾	oui	oui	oui	−	−	−	oui	oui	oui	oui	oui	−	−

1)Seulement disponible avec le ThermoStat C

2)Fréquence d'agitation maximale de 2 000 rpm lorsque le couvercle est utilisé

Téléchargements: Eppendorf SmartBlock

Brochure

The Value of Mixing

Eppendorf Temperature Control and Mixing Instruments

PDF 2.5MB

Anglais

Cela peut aussi vous intéresser

Eppendorf ThermoStat C

L’Eppendorf ThermoStat C permet de chauffer et de refroidir les échantillons durant les étapes d’incubation. Les SmartBlocks dédiés interchangeables offrent la polyvalence nécessaire aux différents formats de récipients.

Eppendorf Deepwell Plates

Haute qualité et performances supérieures des Eppendorf Deepwell Plates.

Eppendorf Microplate with OptiTrack® matrix

Eppendorf Microplates

Une transparence inégalée avec la Eppendorf Microplate

DNA LoBind® tubes - 0.5 mL, 1.5 mL, 2 mL and 5 mL with closed lid

Eppendorf Safe-Lock Tubes

Eppis - Les Eppendorf Safe-Lock Tubes offrent une protection exceptionnelle contre toute ouverture involontaire et éliminent complètement tout risque de fuite pendant l'incubation et le stockage

Eppendorf Tubes^® 5.0 mL

Microtubes supérieurs pour les échantillons de 0,5 mL à 5,0 mL

Eppendorf ThermoMixer^® C

L’Eppendorf ThermoMixer C permet de chauffer, de refroidir et d’agiter les échantillons durant les étapes d’incubation. Les SmartBlocks dédiés interchangeables offrent la polyvalence nécessaire aux différents formats de récipients.

ThermoTop^®

LesThermoTop limitent la condensation dans les tubes de prélèvement pendant l’incubation lors de l’utilisation du ThermoMixer ou du ThermoStat.

Votre session va bientôt expirer

Minutes

Secondes

Eppendorf SmartBlock

Informations produit

Informations produit

Données techniques