Are the epT.I.P.S. Box / epT.I.P.S. Box 2.0 and the epT.I.P.S. Racks UV-resistant?

The UV stability of epT.I.P.S. box / epT.I.P.S. Box 2.0 (made of polycarbonate) as well as of the epT.I.P.S. racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light. If a disinfectant is applied prior to UV irradiation make sure to take off the reagent by wiping off using a cloth soaked in water.

Are Eppendorf products free of RNA?

All products certified with "PCR clean" are tested free of human DNA, DNase, RNase and PCR inhibitors. The following applies from our point of view: Where no human DNA is detected, there can also be no RNA, which is considerably more unstable.

What is the meaning of the PCR Clean seal?

For molecular-biological requirements Eppendorf offers a new standard for uniform purity specifications. All consumables marked with the "Certified PCR Clean” label are guaranteed free of human DNA, DNase, RNase and PCR inhibitors.

How do you make your Biopur products free of pyrogens?

All Biopur products are manufactured fully automatically under cleanroom conditions. This eliminates contamination of the disposables through contact with people. An independent laboratory checks that each individual batch is free of pyrogens.Additionally the products are sterilized by radiation or treatment with ethylene oxide.

What is the shelf life of Eppendorf Biopur products?

If the Biopur products are stored according to the information in the instruction manual they have a shelf life of 5 years. The minimum expiry date is printed on the label of the box.

Why are there double labels on the folding boxes, as "PCR clean" + "Sterile" or "PCR clean" + "Protein-free"?

Due to the modularization of purity grades, some products are labeled with more than one purity grade symbol. For example, the epDualfilter T.I.P.S. has the double seal "PCR clean "+ "Sterile" and the UVette the double seal "PCR clean" + "Protein-free" on the packing. The certification remains unaffected by the modularization.

Are batch-specific certificates for the new purity grades available in the internet?

Yes, the batch-specific purity grades can be downloaded at our certificates homepage .

Can products of the previous and new modular purity grades (with new seals) be used simultaneously in one application?

Yes, if no batch attachment is required for the application, products of the old and new modular purity grades can be used, as their specifications are the same.

What are the reasons for using single-use plasticware in the laboratory?

Contamination and cross-over can only be avoided by using single-use plastic items. In addition, there is no annoying and time-consuming cleaning of glassware.

How are Eppendorf pipette tips tinted?

Organic, heavy-metal-free dyes (PP granulate) are used to tint the pipette tips.

Is a reload available for the 5 mL epTIPS Box?

No, the 5 mL epTIPS Box will be filled with epTIPS Standard.

Do Eppendorf pipette tips contain heavy metals?

The potential release of trace metal ions from the epTIPS under extreme conditions was measured by an independent and certified laboratory. The certificate that provides exact concentration per metal is provided as a pdf on our certificates homepage .

Are Eppendorf pipette tips free of silicone / silicone oil?

Neither silicone nor silicone oil is added during the production process of epT.I.P.S. pipette tips.

Up to which temperature can solutions be dispensed with epTIPS?

The epTIPS made of PP are suitable for liquids with a temperature of max. 90°C. Please take into account that the pipetting error rises due to evaporation into and warming of the air cushion.

To destroy prions, an autoclave step at 136 °C and 3 atm must be carried out. Can the epTIPS Box (or epTIPS Rack Biopur) withstand this?

No, the epTIPS Box or the epTIPS Rack Biopur cannot be autoclaved at 136 °C.

Are the epTIPS Biopur suitable for safe use in the food industry within Europe?

All Biopur products are manufactured fully automatically under cleanroom conditions. This eliminates contamination of the disposables through contact with people. Beta radiation is used as the sterilization method. An independent laboratory checks that each individual batch is free of pyrogens. The epTIPS Biopur are suitable for use in the food industry according to the Food and Consumer Goods Legislation § 5, paragraph 1 no. 1 (food and consumer goods). Please note: The suitability of a consumer item for the intended purpose, the influence of the filler on taste and smell, and the compliance with limitations (e.g. global migration, specific limitations and other analytical specifications) should be tested by the manufacturer or user for individual cases.

Must the lid on epT.I.P.S. Boxes / epT.I.P.S. Boxes 2.0 be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

Can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved at 133 °C?

No, the epT.I.P.S. Box / epT.I.P.S. Box 2.0 cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epT.I.P.S. Box 2.0 compatible with the Reloads for the forerunner epT.I.P.S. Box?

Yes, the epT.I.P.S. ® Box 2.0 is compatible with all epT.I.P.S. Reloads and all epT.I.P.S. BioBased Reloads.

What is the difference between epT.I.P.S. Box / epT.I.P.S. Box 2.0 and epT.I.P.S. Rack?

The epT.I.P.S. ® Box 2.0 in the new design, equipped with additional benefits, is the successor product of the epT.I.P.S. ® Box used in the market since 2002. Like its predecessor, the epT.I.P.S. Box 2.0 can be autoclaved up to 100 times and can be filled with all epT.I.P.S. Reload variants for pipette tips in Eppendorf Quality, PCR clean, Biopur ® and PCR clean/Sterile. Please note: the reload variants for tips in Biopur ® and PCR clean/Sterile can only be used in the epT.I.P.S. ® Box 2.0. They do not fit into the predecessor epT.I.P.S. Box. The epT.I.P.S. ® Racks are disposable and destined only for single use and are available in the purity grades Biopur ® and PCR clean/Sterile. For detailed information visit: www.eppendorf.com/discover/the-magician-eptipsr-boxes-20

How often can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved?

Both boxes can be autoclaved up to 100 times. Stacking of many boxes should be avoided during this process. Please note that if Reloads are inserted, the tray and tips can only be autoclaved once and that filtered tips cannot be autoclaved.

What are the dimensions of the epTIPS standard?

0,1-10 µL: length: 34 mm, diameter work cone: 6 mm, diameter opening: 0,35 mm 0,1-20 µL: length: 40,5 mm, diameter work cone: 6 mm, diameter opening: 0,36 mm 0,5-20 µL: length: 45,7 mm, diameter work cone: 6 mm, diameter opening: 0,37 mm 2-200 µL: length: 52,7 mm, diameter work cone: 7 mm, diameter Öffnung: 0,52 mm 20-300 µL: length: 55 mm, diameter work cone: 7 mm, diameter opening: 0,6 mm 100-1000 µL: length: 70,72 mm, diameter work cone: 8,8 mm, diameter opening: 0,83 mm 1250 µL: length: 75,5 mm, diameter work cone: 8,8 mm, diameter opening: 1,0 mm 2,5 mL: length: 115 mm, diameter work cone: 12 mm, diameter opening: 1,32 mm 5 mL: length: 120,3 mm, diameter work cone: 15,5 mm, diameter opening: 1,65 mm

Are the polypropylene pipette tips UV-resistant?

Yes. Use on a sterile bench, for example, is safe.

If epT.I.P.S. Reloads are to be autoclaved, does the film- and plastic-packaging need to be removed?

Yes, under no circumstances should the film be autoclaved alongside the tips. Please note that stacked reloads can only be autoclaved one time, when inserted individually into the epT.I.P.S. Box or epT.I.P.S. ® Box 2.0. Reloads for pipette (filter) tips in Biopur ® or PCR clean/Sterile cannot be autoclaved.

How often can the epTIPS Boxes be autoclaved?

The box can be autoclaved up to 100 times, the reloads up to 5 times.

Must the lid on epTIPS Boxes be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

Can the epTIPS Boxes be autoclaved at 133 °C?

No, the epTIPS Box cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epTIPS Box or are the epTIPS Racks UV-resistant?

The UV stability of epTIPS boxes (made of polycarbonate) and epTIPS racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light.

Can the racks, in which the epTIPS Biopur are packed be autoclaved?

Yes, up to ten times. Since Filtertips (which may not be autoclaved) are also packed in these racks the autoclavability is not noted in the catalogue.

text.skipToContent text.skipToNavigation

CH | CHF

No results found

Search Suggestions

Product Families

Show all Product Families ()

Article

Show all Articles ()

Content

Show all Content ()

epT.I.P.S.^® - Pipette Tips

Eppendorf epT.I.P.S.® – available in sizes from 0.1 µL to 10 mL

Eppendorf epT.I.P.S.® work in perfect harmony with your Eppendorf pipettes

Sample being pipetted from elongated ep T.I.P.S.® to Eppendorf LoBind® deepwell plate

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® Standard pipette tip package: a resealable bag

epT.I.P.S.® pipette tips Box 2.0 from Eppendorf

epT.I.P.S.® Rack, Biopur®, 2 – 200 µL tips

Pre-sterilized epT.I.P.S.® and ep Dualfilter T.I.P.S.® pipett tip variants are available in Racks

Product Information

epT.I.P.S. pipette tips work in perfect harmony with your Eppendorf pipettes! The ergonomically designed cone geometry allows for complete sealing as well as minimal attachment and ejection forces. These pipette tips meet EN ISO 8655 requirements and can also be used with pipettes from other manufacturers.

Show more Product Information

Important customer information on Boxes and Sets: change of article numbers

You will find additional download material at the bottom of this page

Product Information

Applications

Features

The perfect fit for your Eppendorf pipette: epT.I.P.S. ensure a pipetting system you can rely on
Make everyday work easier and more enjoyable with the epT.I.P.S. (Eppendorf "Totally Integrated Pipetting System") pipette tips. These pipette tips are manufactured to extremely high quality and purity standards and are designed to cover all of the specific needs of your samples. Offering reduced-force tip attachment and ejection with complete sealing, epT.I.P.S. work in perfect combination with your Eppendorf pipettes and form a fully integrated pipetting system that delivers maximum precision, accuracy and reproducibility.
Eppendorf pipette tips with ideal wetting properties and optimum transparency are manufactured exclusively from high-purity plastic materials. epT.I.P.S. pipette tips are also available in a range of certified purity grades: Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur^®. Choose the pipette tips quality and purity you need to always get reproducible results for your experiments. The universal nose cone design allows Eppendorf tips to also be used with pipettes from other manufacturers.

Pipette tips of the purity grade Eppendorf Biopur^® are either individually packaged or offered in disposable Racks, the Rack body of which is made of "single source" intra-type collection polypropylene recyclate from contact lens manufacturing. As epT.I.P.S.^® BioBased in Biopur^® they are available in sterile Reloads for insertion into the epT.I.P.S.^® Box 2.0. PCR clean pipette tips are available in non-sterile Reloads. Eppendorf Quality pipette tips are also available pre-assembled in Reloads or as bulk ware in bags. All Reloads variants can be easily inserted into the matching epT.I.P.S. Box 2.0.

How can you recognize an original Eppendorf pipette tip?
All Eppendorf tips feature a "ring" of drop-shaped relief elements on the edge of the tip crown.

Extended length for reliable sampling: epT.I.P.S. L pipette tips
The elongated pipette tips - epT.I.P.S. L - enable you to reliably reach your sample while pipetting from and into conical tubes, high reagent bottles, narrow deep vessels, cell culture flasks or deepwell plates. The long and slim design of these elongated pipette tips gives you free access to your sample with reduced risk of touching the sides of tubes or wells. Cross-contamination during pipetting can be reduced to a minimum. epT.I.P.S. L are available in volumes of: 0.5 – 20 µL, 50 – 1,250 µL, 0.2 – 5 mL and 0.5 – 10 mL.

You are about to leave this site.

epT.I.P.S.® - Pipette Tips

epT.I.P.S. cone edge with ACT label

Eppendorf epT.I.P.S.® – available in sizes from 0.1 µL to 10 mL

Eppendorf epT.I.P.S.® work in perfect harmony with your Eppendorf pipettes

epT.I.P.S.® L elongated pipette tips in use to fill a Deepwell plate

epT.I.P.S. Rack 200µL rack body made of 100% recyclate

epT.I.P.S. Racks 200µL detail, rack body made of 100% recyclate

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® macro volume tips facilitate easy reach to the bottom of e.g. 15 mL centrifugation tubes or flasks

epT.I.P.S.® Standard pipette tip package: a resealable bag

epT.I.P.S. Box 2.0 family, 3 boxes, 01

epT.I.P.S. Box 2.0 box with tips in tray

epT.I.P.S. Reloads family

epT.I.P.S. Reloads 2 versions, stacked and stacked against each other