Logged in as:
Bioprocess Autosampler
Bioprocess Autosampler dual head system, 4x DASbox, bottles side, front view, cropped

Modular autosampling solution for small and bench scale bioprocess systems
Bioprocess Autosampler sample storage 1

Gain Better Bioprocess Data with Less Effort
Videos not loading, because cookies have been rejected. Change your

Product Information
The Bioprocess Autosampler takes samples from multiple bioreactors and stores them tempered for later analysis. It is compatible with glass and single-use bioreactors operated with a DASbox® Mini Bioreactor System or a DASGIP® Parallel Bioreactor System.You will find additional download material at the bottom of this page
Products (2)
Accessories (8)
epServices (4)
2 Products
Catalog no.
7700200007
|
Catalog no.
7700200008
|
Show more Products
Product Information
Applications
Features
Gain Better Bioprocess Data with Less Effort:
Often you need to take a sample from your culture, not only when the bioprocess is finished, but also while it is still running.
Using the samples you can observe how your culture is growing, how your desired product is produced, and to what extend nutrients are consumed. Like this, you can take action, if needed and to discover interdependencies between these and more parameters. Delegating the sampling task to an autosampler facilitates sampling 24/7 in short and regular intervals and like this gaining complete datasets.
The advantages of automated sampling:
Short and regular sampling intervals help obtaining strong datasets. Regular measurement of process parameters, the cells' status, and the concentration and quality of the product is the basis for a comprehensive view on the process. Such information is indispensable for process optimization.


Automated sampling
• Facilitates sampling 24/7 in regular, short intervals
• Time is freed up for other tasks
• Automated sample storage reduces risk for human error




Sampling Procedure
• The Bioprocess Autosampler holds one sampling port per bioreactor
• Tubing connects the sampling port with a dip tube in the bioreactor
• Sampling ports harbor a septum, which preserves the sterility of the bioreactor
• For sampling, a needle connected to a syringe is automatically inserted into the port, pinching through the septum
• The sample is transferred to a sampling vial by pinching through a septum in the vial lid




Compatible Bioprocess Control Systems
The Bioprocess Autosampler can be installed with new as well as retrofitted to existing bioreactor control systems.
DASbox® Mini Bioreactor System
• Parallel processing of up to 16 bioreactors*
• Compatible with glass and single-use bioreactors
• Working volume: 60 – 250 mL
DASGIP® Parallel Bioreactor System
• Parallel processing of up to 16 bioreactors*
• Compatible with glass and single-use bioreactors
• Working volume: 200 mL – 1.8 L
* First release with 8 vessels only


Read More
Read Less
- Research and development in microbiology
- Small scale bioprocesses for aerobic and anaerobic bacteria and yeasts
- Suitable for batch, fed-batch, and continuous processes
- Aseptic operation without the use of a laminar flow cabinet
- Compatible with differently-sized glass and BioBLU® Single-Use Bioreactors with working volumes of 60 mL to 1.8 L
- Suitable for 1.5 mL and 10 mL sample vials, up to 648 samples can be stored
- Enables regular sampling 24/7
- Sample storage between 4 and 40 °C.
- Sanitation procedure using ethanol is similar to procedures, which are usually applied when sampling manually
- Low dead volume minimizes the reduction of culture volume
- Modular design that facilitates expansion of the number of bioreactors to be sampled and retrofitting of existing bioprocess systems
- Control of the Bioprocess Autosampler is integrated in DASware® control bioprocess software
Downloads: Bioprocess Autosampler
-
English