- All-in-one versatile device: Mixing, heating, and cooling of 100 µL – 50 mL tubes, MTP/DWP/PCR-plates, or cryovials (water-free, automated cell-thawing)
- Optimized temperature transfer for plates: Dedicated form-fitting blocks for DWP (96 well, 500/1000 µl) and PCR plates (96/384 well)
- Block homogeneity assured: Serial number-specific temperature test certificate, block-specific calibration possible, and IQ/OQ GxP service available
- Improved mixing results: Up to 3,000 rpm at a wide 3 mm orbit (2DMix-Control)
- Tool-free block exchange within seconds: Eppendorf QuickRelease function and automatic block recognition
- Condensation protection inside tubes and improved block homogeneity: Optional ThermoTop® heated lid with block-type specific heating for SmartBlocks up to 2.0 mL
- Parallel incubation at a different temperature: Optional SmartExtender for up to 12 x 1.5 mL tubes e.g., for enzymatic reactions
- Speed up your tasks: 5 keys for common programs plus 15 additional, storable programs (freely definable, multi-parameter)
- Proven design for longevity: Robust design and LCD display – ready for teaching labs and reliable operation for years to come
- Supports sustainability targets: Sustainability score validated by NGO My Green Lab® and certified with ACT® label
- ACT-labeled: Independent third-party product sustainability validation by My Green Lab
US | USD
Eppendorf ThermoMixer® C
Eppendorf ThermoMixer C can be equipped with different SmartBlocks
Eppendorf ThermoMixer C with SmartBlock 1.5 mL
Eppendorf ThermoMixer® C - One device for all your lab´s mixing tasks
Discover our most versatile solution for mixing, heating, and cooling of samples - Selection of compatible SmartBlocks
Easy and reliable operation for years to come
Robust design and LCD display – proven and tested since years in thousands of labs globally
Improve your mixing and tempering results
2DMix-Control: Up to 3,000 rpm at a wide 3 mm orbit – even for MTP or 384-well PCR plates
Optimized temperature transfer for plates
Dedicated form-fitting SmartBlocks for deep-well (96 well, 500 or 1000 µl) and PCR plates (96/384 well) ensure fast temperature transfer from the block to your samples
The power of form-fitting thermoblocks
Flat SmartBlock plates (top) vs. form-fitting SmartBlock DWP (bottom) - Exemplary thermal images to compare sample temperatures after equal heat-up times.
Eppendorf ThermoMixer C with ThemoTop
When the ThermoTop is placed on the device, it begins heating immediately. The temperature optimally adapts to the test temperature to ensure that it does not negatively affect the sample. Condensation droplets have no opportunity to form.
Missing a second incubation temperature?
Optional SmartExtender: Up to 12x1.5 mL tubes, compatible with all SmartBlocks - for example for parallel enzymatic reactions.
Standardized and water-free cell thawing with the optional SmartBlock cryo thaw
Contamination protection, standardization, and versatilty needed? Convert your Eppendorf ThermoMixer® C (used with Eppendorf CryoStorage Vials here) into a powerful alternative to hand-/water bath warming or dedicated cell-thawing devices
Easy tube transfer and synchronized start of reactions
Optional Eppendorf Transfer Rack - For Eppendorf SmartBlocks 0.5, 1.5, and 2.0 mL
Eppendorf SmartBlock Removal (Step 1)
Step 1: Eppendorf QuickRelease mechanism enables quick and easy block exchange. Just press the lever on the front and the block can be removed - no tools are needed, done in seconds.
Eppendorf SmartBlock Removal (Step 2)
Step 2: Eppendorf QuickRelease mechanism enables quick and easy block exchange. Just press the lever on the front, and the block can be removed - no tools are needed, done in seconds.
Eppendorf SmartBlock Removal (Step 3)
Step 3: Eppendorf QuickRelease mechanism enables quick and easy block exchange. Just press the lever on the front, and the block can be removed - no tools are needed, done in seconds.
Eppendorf ThermoMixer C: Sustainability rating by ACT
Independent sustainability certification needed? The ACT label of My Green Lab for Eppendorf ThermoMixer C
ThermoMixer_C SmartBlock_15mL angle view
Eppendorf ThermoMixer with SmartBlock 15 mL: Incubation and mixing with 15 mL conical tubes (up to 8 vessels)
ThermoStat C SmartBlock: PCR 96, total angle
Eppendorf ThermoMixer with SmartBlock PCR 96: Incubation and mixing for 96 well PCR plates (skirted, semi-skirted, and non-skirted)
Eppendorf ThermoMixer C with 5 mL tubes
Eppendorf ThermoMixer C with SmartBlock 5 mL: Incubation and mixing for 5 mL vessels
ThermoMixer_C SmartBlock_plate_total_angle
Eppendorf ThermoMixer C with SmartBlock Plates
ThermoMixer C lid, plate
Eppendorf Thermomixer C with SmartBlock and lid: The lid reduces loss of temperature as well as risk of contamination when using open vessels.
ThermoMixer C Scientist in lab with ThermoTop
Trouble with condensation? The Eppendorf ThermoTop heats from the top to reduce potential condensation within the vessel lids
Eppendorf ThermoMixer® - Change comes quickly, take advantage of our versatility
You need everything? The Eppendorf ThermoMixer C combines excellent mixing performance with excellent temperature control to ensure complete, dependable and reproducible test results. Improve your assay results by mixing and incubating samples at the same time. The Eppendorf ThermoMixer C convinces users with its quick and easy-to-exchange SmartBlocks for all common lab vessels, new and improved program functions, and high level of stability for every mixing frequency. There is almost no limit to the variety of applications waiting for you!
Product Information
- basic device without thermoblock
- ACT, 100 – 130 V/50 – 60 Hz (US/JP/South America/TW)
-
Learn more about sustainability at Eppendorf - incl. how to recognize a sustainable thermomixer
-
Eppendorf Promotions: View other special offers!
You will find additional download material at the bottom of this page
Services (8)
Accessories (20)
VisioNize (2)
|
|
|
|
|
|
Quantity
Catalog no.
0082100300
Price
$ 1,347.00
Inquire
|
|
|
|
|
|
|
|
|
Added to Your Cart
Technical Data
Features
Technical Data
| Specifications | Eppendorf ThermoMixer® C |
|---|
| ACT label | yes |
| Sample capacity | All common vessels and plate formats from 5 µL to 50 mL |
| Product type | ThermoMixer |
| Timer | 5 sec to 99:30 h, continuous |
| Interfaces | USB interface |
| Power plug | power plug type B |
| Power supply | 100 – 130 V, 50 – 60 Hz |
| Max. power consumption | 200 W |
| Dimensions (W × D × H) | 20.6 × 30.4 × 13.6 cm / 8.1 × 12.0 × 5.4 in |
| Product weight | 6.3 kg / 13.9 lb |
| Max. speed | 3,000 rpm1) |
| Temperature range | Min: 15 °C below RT, max: 100 °C1) |
| Mixing frequency | 300 – 3,000 rpm1) |
| Mixing and vortexing radius | 1.5 mm |
| Temperature settings | 1 °C / 100 °C |
| Mixing orbit | 3 mm |
| Temperature accuracy | Max. ±0.5 °C at 20 – 45 °C1) |
|
Eppendorf ThermoMixer® |
|
| Heating rate | Max. 7 °C/min (when using SmartBlock plates)1) |
| Cooling rate | Max. 2.5 °C/min between 100 °C and RT |
1)depending on SmartBlock used
