- Speed up you PCR: Heating rate of max. 5 °C/s with Mastercycler X50s
- Cooling rate above RT: max. 2.3 °C/s
- Control accuracy: ±0.15 °C
- For more reproducible results: High block temperature homogeneity (±0.2 °C at 20 – 72 °C) and control accuracy (±0.15 °C); constant block temperature of 20 °C during warm-up phase of the heated lid reduces thermal load on samples and minimizes formation of non-specific products
- Supports sustainability goals: ACT-certified, low noise level (33.6 dB(A)) and energy consumption (0.114 kWh) for Mastercycler X50s (3-step PCR run); energy-saving mode
- True control and remote monitoring: 7" touch interface e.g., with user management and detailed GLP- and audit supporting run documentation; remote monitoring and more with VisioNize®
- Fast protocol optimization: Simultaneous optimization of two different temperature steps of one program (2D-gradient)
- Connectivity: Mastercycler X50 with large 7" touchscreen can control up to 9 eco units; connect up to 50 eco units with the CycleManager X50 software
- Options and accessories: Dedicated service and maintenance plans e.g., IQ/OQ GxP or temperature verification with sensors calibrated according to ISO 9001 or ISO/IEC 17025, TVS-T6 block temperature verification system available, broad selection of PCR consumables
- Easy program transfer: Program migration feature supports adaption of programs from slower cyclers, ramp rates are automatically adjusted according to the entered desired runtime
HK | HKD
No results found
Search Suggestions
Mastercycler® X50a
Mastercycler X50a
Product Information
- 100 – 240 V/50 – 60 Hz (CN)
- aluminum block, 96-well or 0.1/0.2 mL tubes
- with touchscreen interface
-
Learn more about sustainability at Eppendorf - incl. how to recognize a sustainable PCR thermocycler
You will find additional download material at the bottom of this page
Technical Data
Features
Technical Data
| Specifications | Mastercycler® X50a |
|---|
| Unit can control 9 other units in network | ■ |
| Unit can only be controlled | – |
| Thermoblock | Aluminum |
| Sample capacity | 96-well plate or 0.1/0.2 mL tubes |
| 96-well plate | ■ |
| 384-well plate | – |
| 0.1/0.2 mL tubes | ■ |
| Heating technology | Six peltier elements |
| 2D-Gradient block | over 12 columns and 8 rows |
| Temperature control mode | Fast, Intermediate, Standard, Safe |
| Temperature control range of the block | 4 – 99 °C |
| Gradient range | 1 – 30 °C |
| Gradient temperature control range | 30 – 99 °C |
| Block homogeneity 20 – 72 °C | ≤±0.2 °C |
| Block homogeneity 95 °C | ≤±0.3 °C |
| Control accuracy | ±0.15 °C |
| Product type | PCR |
| Heating rate | max. 5 °C/s |
| Cooling rate | max. 2.3 °C/s |
| Lid descent | flexlid® technology with thermal sample protection |
| High pressure lid | – |
| Lid temperature range | 37 – 110 °C |
| Interfaces | Ethernet, USB |
| Power supply | 100 – 240 V, 50 – 60 Hz |
| Max. power consumption | 850 W |
| Total weight | 11.5 kg |
| Dimensions (W × D × H) | 27.5 × 43 × 33 cm / 10.8 × 16.9 × 13 in |
| Remote Device Monitoring and Notifications (VisioNize®) | VisioNize® touch enabled |
| Touchscreen Interface | yes |
Downloads: Mastercycler® X50a
Filter
Reset all
Language (1)
