FAQ

Are you searching for information of a special product?

Please select the Product Group.

 

If there are further questions, please contact our Application Support.

No filters are set.
1231 Documents
Why should I have my freezer serviced at regular intervals?
Why should I have my freezer serviced at regular intervals?
Eppendorf Performance Plans offer a selection of preventive maintenance services which ensure a consistent performance of the device and confidence in the results.
How often does my freezer need to be serviced?
How often does my freezer need to be serviced?
This depends on how intensively it is used and varies depending on the load of the device. However, we recommend to have it serviced at least once a year.
What measures can I take to care for the device?
What measures can I take to care for the device?
The air filter can be cleaned approx. every three months (depending on the ambient conditions). In addition, if there is any ice build-up in the device this should be removed. The seals should be cleaned once a month and, if required, the device can be defrosted and cleaned on the inside and on the outside. Please refer to your operating manual for further information - Maintenance chapter.
What types of service programs are available for freezers?
What types of service programs are available for freezers?
The available service programs can be found under the respective instrument in the Service & Support / Maintenance and Certification Services section.
What are the costs for the different freezer service programs?
What are the costs for the different freezer service programs?
The cost depends on the model and on the service that is performed. Please contact your local Eppendorf Service.
Who is my contact?
Who is my contact?
Please contact your local Eppendorf Service Team. You find the contact data on our homepage or in the information materials.
What does a CO2 or LN2 backup system offer?
What does a CO2 or LN2 backup system offer?
The backup systems are independent systems which ensure the protection of samples in the event of a mains/power outage or damage to the device by injecting liquid LN2 or CO2 into the device. They are controlled by an independent temperature sensor. Carbon dioxide systems maintain temperatures between -40 ºC and -70 ºC for a period of up to 48 hours. Liquid nitrogen reserve systems keep the freezer temperature at -86 ºC for a few hours. CO2 systems and LN2 systems can be retrofitted by the user.
What is IQ or OQ and what do I need them for?
What is IQ or OQ and what do I need them for?
Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.
How often does the OQ need to be carried out for a freezer?
How often does the OQ need to be carried out for a freezer?
The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.
How do I defrost my ULT-freezer?
How do I defrost my ULT-freezer?
When it has been operating for longer periods, defrosting may be required. You can find further information on how to proceed in the operating manual of your Eppendorf freezer.
What types of training or online training do you offer to enable me to improve my skills? …
What types of training or online training do you offer to enable me to improve my skills?
Please visit the Eppendorf webpage about the Eppendorf Training Center or contact your local Eppendorf Service for further information and a quotation.
Why should I have my incubator serviced at regular intervals?
Why should I have my incubator serviced at regular intervals?
Eppendorf Performance Plans offer a selection of preventive maintenance services which ensure a consistent performance of the device and confidence in the results.
How often does my incubator need to be serviced?
How often does my incubator need to be serviced?
This depends on how intensively it is used and varies depending on the load on the device. However, we recommend to have it serviced at least once a year.
What do you need to look out for before carrying out a service?
What do you need to look out for before carrying out a service?
The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device. You should also ensure that the device has cooled down already.
What types of service programs are available for incubators?
What types of service programs are available for incubators?
The available service programs can be found under the respective instrument in the Service & Support / Maintenance and Certification Services section.
How much are the different incubator service programs?
How much are the different incubator service programs?
The cost depends on the model and on the service that is performed. Please contact your local Eppendorf Service. www.eppendorf.com/contact
Who is my contact?
Who is my contact?
Please contact your local Eppendorf Service Team. You find the contact data on our homepage or in the information materials. www.eppendorf.com/contact
What is IQ or OQ and what do I need them for?
What is IQ or OQ and what do I need them for?
Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.
How often does the OQ need to be carried out for an incubator?
How often does the OQ need to be carried out for an incubator?
The company is responsible for technical checks of devices. Eppendorf recommends regular device qualifications depending on the intensity of use, however, they should be carried out at least once a year.
How can my incubator be cleaned/ disinfected?
How can my incubator be cleaned/ disinfected?
Use a solution of 70% isopropanol (isopropyl alcohol) and 30% distilled water as a disinfectant. Follow the cleaning guidelines carefully that are described in your user manual.
Which parts of the incubator should be replaced at regular intervals?
Which parts of the incubator should be replaced at regular intervals?
Replace the HEPA filter of the CO2 supply line and the HEPA filter with automatic zero setting * at least once a year. (* Auto-zero filter is only used in R-models.)
What types of training or online training do you offer to enable me to improve my skills? …
What types of training or online training do you offer to enable me to improve my skills?
Please visit the Eppendorf webpage about the Eppendorf Training Center or contact your local Eppendorf Service for further information and a quotation. www.eppendorf.com/training
Why should I have my microinjector/ micromanipulator serviced at regular intervals?
Why should I have my microinjector/ micromanipulator serviced at regular intervals?
To ensure the optimum performance and precision of your device. This also enables the early detection of any defects which can then be corrected easily. Only precise and accurate devices ensure a successful cell manipulation!
How often does my microinjector/ micromanipulator need to be serviced?
How often does my microinjector/ micromanipulator need to be serviced?
This depends on how intensively it is used and varies depending on the load on the device. However, we recommend to have it serviced at least once a year.
What do you need to look out for before carrying out a service?
What do you need to look out for before carrying out a service?
The device needs to be decontaminated first. The device must be freely accessible and all samples removed from the device.
What types of services are available for microinjectors/micromanipulators?
What types of services are available for microinjectors/micromanipulators?
The available service programs can be found under the respective instrument in the Service & Support / Maintenance and Certification Services section.
What does the electrical safety check include?
What does the electrical safety check include?
The protective earth conductor resistance, leakage current, touch current and the insulation resistance are checked.
How much are the different service programs for microinjectors/micromanipulators?
How much are the different service programs for microinjectors/micromanipulators?
The cost depends on the model and on the service that is performed. Please contact your local Eppendorf Service.
Who is my contact?
Who is my contact?
Please contact your local Eppendorf Service Team. You find the contact data on our homepage or in the information materials.
What is IQ or OQ and what do I need them for?
What is IQ or OQ and what do I need them for?
Installation and operational qualification; the IQ documents that the device has been delivered and installed correctly. The OQ checks the correct functioning of a device. IQ/OQ ensure that your quality management requirements are met and that your device operates properly and in accordance with the manufacturer’s specifications.