Software Downloads

Software and Firmware Updates

Software/Firmware revisions are made available at no charge through this web page so that all users can benefit from the latest performance enhancements.
The easy upgrade procedure takes only a few minutes to perform.

Pipette Updates

Eppendorf Pipette Software Update Tool

NOTE: The update tool will connect to the Eppendorf servers to download the latest software update for your electronic Eppendorf pipette. Instructions how to install the update are included in the .zip file.

WARNING: With a software update, the pipette is reset to factory settings and all settings and saved programs or favorites (if any) are deleted.

Date/File/Version Description of Changes
Date/File/Version
16-Jul-2021:
Rev. 04.02.00 for Eppendorf Xplorer® or Xplorer® plus
Rev. 05.01.00 for Multipette®/Repeater® E3 or E3x

Eppendorf Xplorer® or Xplorer® plus: Revision 04.02.00 includes the following changes:

- Improved battery capacity measurement
- Improved read & write function of user settings
- Support for Eppendorf Xplorer® connect WiFi module for connection to VisioNize® pipette manager
- Integration of an automatic blow out in reverse pipetting mode

Multipette®/Repeater® E3 or E3x: Revision 05.01.00 includes the following changes: 

- Improved battery capacity measurement
- Improved read & write function of user settings

VisioNize Updates

VisioNize box Updates

Date/File/Version Description of Changes
VisioNize box Updates.zip
 
Firmware revision 1.14 implements compatibility to the VisioNize Lab Suite.

Freezer Updates

RackScan Analyze

NOTE: The RackScan Analyzer software is used to read 2D data matrix codes on consumables and to transfer the information contained in the 2D data matrix codes for further use in software applications.
The RackScan Analyzer software was developed to be used with RackScan b and RackScan s.

Date/File/Version Description of Changes
20-Dec-2019
RackScan Analyzer.zip
Version: 3.15 (build 3129)

 
The zip-file includes the following files:
  • Eppendorf RackScan Analyzer Installer
  • Software Manual including installation guide
 

Temperature Control and Mixing Updates

ThermoMixer® C, ThermoMixer® F, and ThermoStat® C Updates

Date/File/Version Description of Changes
3.5.0-ThermoMixer_Autoupdate.zip
 

Software version 3.5.0 introduces a new application feature for thawing cells which is exclusively available for the Eppendorf ThermoMixer® C in combination with the new Eppendorf SmartBlock™ cryo thaw. Furthermore there are several minor additions, updates and fixes for the Eppendorf ThermoMixer® C, ThermoMixer® F, and ThermoStat® C such as

•    User notifications by LEDs and simple melodies in special programs (e.g. “Thawing cells”)
•    Mixing programs saved on program keys can be reset to their defaults (only ThermoMixer C)
•    Extended communication with VisioNize box
•    Translations for dialogs which were previously only available in English
•    Adapted lengths of display texts to better fit into GUI
•    Improved memory handling (see warning below)
•    Fixed scrolling behavior in menus with many entries

Bioprocess Updates

Analog Input/Output Module Updates

Date/File/Version Description of Changes
30-Jan-2019
Update_M1372_B.00.zip
Version Analog B.00
Analog I/O software revision B.00 includes the ability to recognize and control up to 8 Analog I/O modules from a single installed version, and addresses previous issues with communication loss.

BioCommand® Batch Control Updates

NOTE: This update is required for any current customer planning to use BioCommand with a BioFlo® 720.

WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.

Date/File/Version Description of Changes
19-March-2021
BioCommand_BCTT_Update_05.01.zip
 
Revision 5.01 includes the following enhancements:
• Pump Direction tag addition to programs module
• BioFlo 720 product support

BioCommand® SFI Updates

Date/File/Version Description of Changes
22-May-2013
M1291-1252 
Rev C.00 - Update.zip

Version C
The updated version of BioCommand SFI allows for the correct interperation of values when used with European operating systems while continuing to report values on US operating systems. This improved version also allows BioCommand SFI to be used with up to 2 each New Brunswick S41i CO2 Incubator Shakers.
It trends and archieves critical data including temperature, speed and gas concentration but does not provide batch control.

BioCommand® Track and Trend Updates

NOTE: This update is required for any current customer planning to use BioCommand with a BioFlo® 720.

WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.

Date/File/Version Description of Changes
19-March-2021
BioCommand_BCTT_Update_05.01.zip
Revision 5.01 includes the following enhancements::
• Pump Direction tag addition to programs module
• BioFlo 720 product support

BioFlo®/CelliGen® 115 Updates

Date/File/Version Description of Changes

30-Jan-2019
Update_M1369_5.01.zip
Version 5.01 (E)

Software revision 05.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• Update for Corporate Identity
• Activation of Trending Module

BioFlo® 120 Updates

Date/File/Version Description of Changes

25-March-2021
1390_1203_
02.08.zip

Version 02.08

Software revision 02.08 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• 1SLPM and 5SLPM TMFC’s with different turndown ratios support is added

BioFlo® 310, BioFlo 415 & CelliGen® 310 Updates

Date/File/Version Description of Changes
30-Jan-2019
Update_M1297
_12.04.zip

Version 12.04

Software revision 12.04 incorporates the following solutions / additions to improve the performance of your bioprocess controller:

  • Update for Corporate Identity
  • Includes updates from Revision L.02
  • Improved driver installation for RS-232 / USB device for externalscale interface (4 or 8 port)
  • Gas flow scaling has been added to all 3 or 4 gas configuration for CO2 gas
  • IP address function, allowing remote connectivity to RPC controller
 

BioFlo® 320 Updates

Date/File/Version Description of Changes
18-Nov-2020
Update_1379_02.08.0008.zip
 

Software revision 02.08 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

  • Issue found with manual network name affecting Static/DHCP setup. Network name detected from Netsh function
  • Delta-V Optical DO calibration issue resolved
  • Pump direction tag added to Modbus
  • 4-100RPM pumps change implemented
 
   

BioFlo®/CelliGen® 510 Updates

Date/File/Version Description of Changes

30-Jan-2019

UPDATE_M1361
_02.02.2006.zip

Version 02.02.0006

Software revision 02.02.0006 incorporates the following solutions/additions to improve the performance of your bioprocess system:
• TY-35B Overlay Value was always off (Close) on sterilization mode. This was resolved to allow TY-35B to open when the temperature falls below 121°C

BioFlo® 610 Updates

Date/File/Version Description of Changes

28-Oct-2019
BioFlo 610 update.zip

Software revision 02.05 incorporates the following solutions/additions to improve the performance of your bioprocess controller: 
  • Detection of touchscreen type for calibration purposes
  • Updated Modbus registers
 

BioFlo® 720 Updates

Date/File/Version Description of Changes

17-Feb-2021
BioFlo
720 update.zip

Software revision 03.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller: 
  • Initial Release
 

CelliGen® BLU (1st Generation) Updates

NOTE: This update is specific to 1st generation CelliGen BLU cabinets. Please check the model of your CelliGen BLU cabinet. If your CelliGen BLU model number begins with the prefix "M1363", please follow the steps on this page to complete your update. If your CelliGen BLU model number begins with the prefix "M1374", please see the update CelliGen BLU (2nd Generation)

Date/File/Version Description of Changes
30-Jan-2019
Update_M1363_C.00.zip

CelliGen®BLU (first generation only) software revision C.00 provides the following resolutions and/or enhancements:

• Manual gas mixing total percent correction
• Improved RS-232 communication for scale driver
• Implementation of CO2 scaling for dedicated TMFC
• IP Network capability
• Improved storage of optical pH parameters

CelliGen® BLU (2nd Generation) Updates

NOTE: This update is specific to 2nd generation CelliGen BLU cabinets. Please check the model of your CelliGen BLU cabinet. If your CelliGen BLU model number begins with the prefix "M1374", please follow the steps on this page to complete your update. If your CelliGen BLU model number begins with the prefix "M1363", please see the update for CelliGen BLU (1st Generation).

Date/File/Version Description of Changes

30-Jan-2019
Update_M1374_2.02.zip
Version 2.02

Software revision 02.02 incorporates the following solutions / additions to improve the performance of your bioprocess controller:

Update for Corporate Identity

Update default Proportional and Integral values for pH loop

RS-232 OPC Server Updates

Date/File/Version Description of Changes
30-Jan-2019
M1295 RS232 Device Interface Kit Rev B.00 - Update.zip
Version B
Update resolves communication errors with PC COM ports.

SciVario® Updates

Date/File/Version Description of Changes

26-Apr-2021

SciVario twin Software and Firmware Update 1.0.0.357.zip
Version 1.0.0.357

SciVario twin controller software and firmware revision 1.0.0.357 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

  1. Enabled calibration for ISM dissolved oxygen (DO) sensors by Mettler Toledo