-
-
-
-
- WHX Labs Dubai 2026
- analytica 2026
- Forum Labo 2026
- SLAS Europe 2026
- Forum Labo 2026 Bioprocess
- Bioprocessing Summit Europe 2026
- BioProcess International 2026
- Swiss Biotech Day 2025
- ISCT 2026
- Pichia 2026
- Future Labs Live 2026
- BioProScale Sympposium 2026
- ASGCT 2026
- Eppendorf Automation Forum 2026
- ESACT 2026
-
-
-
-
- WHX Labs Dubai 2026
- analytica 2026
- Forum Labo 2026
- SLAS Europe 2026
- Forum Labo 2026 Bioprocess
- Bioprocessing Summit Europe 2026
- BioProcess International 2026
- Swiss Biotech Day 2025
- ISCT 2026
- Pichia 2026
- Future Labs Live 2026
- BioProScale Sympposium 2026
- ASGCT 2026
- Eppendorf Automation Forum 2026
- ESACT 2026
-
- Toutes les centrifugeuses
- Centrifugeuses de paillasse
- Centrifugeuses au sol
- Centrifugeuses réfrigérées
- Microcentrifugeuses
- Centrifugeuses polyvalentes
- Centrifugeuses haute vitesse
- Ultracentrifugeuses
- Concentrateur
- Produits IVD
- Consommables pour centrifugeuses haute vitesse et ultracentrifugeuses
- Tubes à centrifuger
- Plaques de centrifugeuse
- Logiciel de gestion d’appareils
- Gestion des échantillons et des informations
-
- Pipettes, distributeurs et dispositifs de manipulation de liquides automatisée
- Pipettes mécaniques
- Pipettes électroniques
- Pipettes multicanaux
- Pipettes et distributeurs à déplacement positif
- Pointes de pipette
- Distributeurs sur flacon
- Auxiliaires de pipetage
- Accessoires pour pipettes et distributeurs
- Pipetage automatisé
- Consommables d’automatisation
- Accessoires d’automatisation
- Services pour pipettes et distributeurs
Leachables: Minimizing the Influence of Plastic Consumables in the Lab
Lab Academy
- Nature
- Pharma
- Contamination
- Pipetage et distribution
- Qualité
- Pointes de pipette
- Cuves
- Test
Many life sciences laboratories still underestimate the influence of substances which may leach from plastic consumables. These "leachables" are capable of interfering with experiments to a large degree. With our long-standing expertise in manufacturing high quality plastic consumables, the entire process chain receives due consideration during development and production of epT.I.P.S.® pipette tips. This translates to: Only carefully selected raw materials are used, which were not recycled. During production, neither plasticizers, nor biocides or mold release agents are used, since especially these additives have been linked to leaching effects which may negatively influence your experiments.
Lire la suite
Videos not loading, because cookies have been rejected. Change your
Additives easing production process (plasticizers, biocides, slip agents) are known to disturb biological assays. Thus their use must be avoided. Additives needed for product characteristics (e.g. not becoming brittle) are decreased to a minimum. Which substances may leach out of the plastic and if these are critical for assays is described by following graphic.
Lire la suite
Due to the very short period of contact, the time window for transmission of leaching substances is very short. Recent scientific literature discussed that there may be effects after increasing the number of pipetting steps indicating a cumulative effect. For this reason a MEA test (Mouse-Embryo-Assay) performed by an exernal accredited and FDA-registered laboratoy, can show whether cell embryos are influenced by molecules from e.g. additives leaching out of the plastic of tips. Mouse-Embryo-Assays are sensitive to substances disturbing growth. Thus Mouse-Embryo-Assays (MEA) are a good validation of influence by leachables. Pipette tips have shown not to influence the growth of mouse embroys.
Lire la suite
Proof of compliance with requirements of standards, guidelines and regulations that apply to biological, diagnostic research and industrial laboratories can be provided with product specific certificates for absence of surface active additives.
Lire la suite