Software Downloads

NOTE: The update tool will connect to the Eppendorf servers to download the latest software update for your electronic Eppendorf pipette. Instructions how to install the update are included in the .zip file.

WARNING: With a software update, the pipette is reset to factory settings and all settings and saved programs or favorites (if any) are deleted.

Download ep_update_tool_v2.zip

Latest update/Version
06-March-2023
Rev. 05.05.00 for Eppendorf Xplorer^® (plus)
04-November-2022
Rev. 06.02.00 for Multipette^® / Repeater^® E3 or E3x

Description of Changes
Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^® :
Revision 05.05.00:

• Added compatibility with Pipette Manager software 1.1.3

Multipette^® /Repeater^® E3 or E3x:
Revision 06.02.00:

• Fixed compatibility issues of previous firmware version with new Multipette/Repeater multi-dispensers produced from 2022

_________________________________________
Previous Versions

23-May-2022
Rev. 05.02.00 for Eppendorf Xplorer^® or Xplorer plus

Description of Changes
Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^® :

• Updated device drivers for new memory module in pipettes produced from 2022 (no changes for pipettes purchased before 2022)

07-Mar-2022
Rev. 05.01.00 for Eppendorf Xplorer^® or Xplorer plus
Rev. 06.01.00 for Multipette^® / Repeater^® E3 or E3x

Description of Changes
Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^® :
Revision 05.01.00:

• Added support for new circuit board in pipettes produced from 2022 (no changes for pipettes purchased before 2022)

Multipette^® / Repeater^® E3 or E3x:
Revision 06.01.00:

• Optimized overvoltage protection
• Improved wake-up/sleep function
• Improved read & write function of user settings

16-Jul-2021
Rev. 04.02.00 for Eppendorf Xplorer^® or Xplorer plus
Rev. 05.01.00 for Multipette^® / Repeater^® E3 or E3x

Description of Changes
Eppendorf Xplorer^® , Xplorer plus and Xplorer plus Move It^® :
Revision 04.02.00:

• Improved battery capacity measurement
• Improved read & write function of user settings
• Support for Eppendorf Xplorer^® connect WiFi module for connection to VisioNize^® pipette manager
• Integration of an automatic blow out in reverse pipetting mode

Multipette^® / Repeater^® E3 or E3x:
Revision 05.01.00:

• Improved battery capacity measurement
• Improved read & write function of user settings

NOTE: Empty USB flash drive with at least 512 MB storage space in FAT32 format needed to perform an update. Instructions how to install the update are included in the .zip file. Important: Please insert the USB drive only after booting up the Pipette Manager.

Download VisioNize_pipettemanager_software_update.zip

Latest update/Version
31-March-2023
Rev. 1.1.3

Description of Changes

• Added new feature Pipetting Records, allowing documentation of pipetting activities and export via PDF file
• Improved WiFi communication with connected pipettes and tablets
• Minor improvements

_________________________________________
Previous Versions
15-Nov-2021
Rev. 1.0.10

Description of Changes

• Added support for Move It^® Adjustable Tip Spacing Pipettes
• Prevention of firmware downgrades for pipettes with a newer firmware version during the firmware update via the VisioNize^® pipette manager
• Minor bugs fixed

09-March-2021
Rev. 1.0.06

Description of Changes

• Initial product version

Description of changes:
Firmware revision 1.14 implements compatibility to the VisioNize Lab Suite

Date/File/Version:
01-March-21
VisioNize_box_firmware_update

NOTE: The RackScan Analyzer software is used to read 2D data matrix codes on consumables and to transfer the information contained in the 2D data matrix codes for further use in software applications.
The RackScan Analyzer software was developed to be used with RackScan b and RackScan s.
Description of Changes
The zip-file includes the following files:

• Eppendorf RackScan Analyzer Installer
• Software Manual including installation guide

Date/File/Version
20-Dec-2019
Version: 3.15 (build 3129)

Description of Changes
Software version 3.5.0 introduces a new application feature for thawing cells which is exclusively available for the Eppendorf ThermoMixer^® C in combination with the new Eppendorf SmartBlock™ cryo thaw.[1] Furthermore there are several minor additions, updates and fixes for the Eppendorf ThermoMixer^® C, ThermoMixer^® F, and ThermoStat^® C such as
• User notifications by LEDs and simple melodies in special programs (e.g. “Thawing cells”)
• Mixing programs saved on program keys can be reset to their defaults (only ThermoMixer C)
• Extended communication with VisioNize box
• Translations for dialogs which were previously only available in English
• Adapted lengths of display texts to better fit into GUI
• Improved memory handling (see warning below)
• Fixed scrolling behavior in menus with many entries

Date/File/Version
26-Nov-20

Description of Changes
Analog I/O software revision B.00 includes the ability to recognize and control up to 8 Analog I/O modules from a single installed version, and addresses previous issues with communication loss.

Date/File/Version
30-Jan-2019
Update_M1372_B.00.zip
Version Analog B.00

NOTE: This update is required for any current customer planning to use BioCommand with a BioFlo^® 720.

WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.

Description of Changes
Revision 5.02 includes the following enhancements:
• Pump Direction tag addition to programs module
• BioFlo 720 product support
• Minor bug fixes

Date/File/Version
06-Oct-2021
BioCommand_BCTT_Update_05.02.zip

For BioCommand Batch Control Plus, a specific software update procedure is required for Revision 5.01. Please contact your local Eppendorf service representative for assistance.

NOTE: This update is required for any current customer planning to use BioCommand with a BioFlo^® 720.

WARNING: Do not attempt to install this update on BioCommand® Batch Control Plus installations. Database files are not compatible and may result in loss of data. For BioCommand® Batch Control Plus updates, please contact your local sales/service representative.

Description of Changes
Revision 5.02 includes the following enhancements:
• Pump Direction tag addition to programs module
• BioFlo 720 product support
• Minor bug fixes

Date/File/Version
06-Oct-2021
BioCommand_BCTT_Update_05.02.zip

Description of Changes
Software revision 05.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• Update for Corporate Identity
• Activation of Trending Module

Date/File/Version
30-Jan-2019
Update_M1369_5.01.zip
Version 5.01 (E)

Software revision 02.08 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• 1SLPM and 5SLPM TMFC’s with different turndown ratios support is added

Date/File/Version
25-March-2021
1390_1203_02.08.zip
Version 02.08

Please contact your local Eppendorf service representative for assistance

Please contact your local Eppendorf service representative for assistance

Please contact your local Eppendorf service representative for assistance

Please contact your local Eppendorf service representative for assistance

Description of Changes:
Software revision 03.01 incorporates the following solutions/additions to improve the performance of your bioprocess controller:

• Initial Release

Date/File/Version
21-February-2021
BioFlo 720 Updates.zip

NOTE: This update is specific to 1st generation CelliGen BLU cabinets. Please check the model of your CelliGen BLU cabinet. If your CelliGen BLU model number begins with the prefix "M1363", please follow the steps on this page to complete your update. If your CelliGen BLU model number begins with the prefix "M1374", please see the update CelliGen BLU (2nd Generation)

Description of Changes
Software revision C.00 provides the following resolutions and/or enhancements:

• Manual gas mixing total percent correction
• Improved RS-232 communication for scale driver
• Implementation of CO2 scaling for dedicated TMFC
• IP Network capability
• Improved storage of optical pH parameters

Date/File/Version
30-Jan-2019
Update_M1363_C.00.zip

NOTE: This update is specific to 2nd generation CelliGen BLU cabinets. Please check the model of your CelliGen BLU cabinet. If your CelliGen BLU model number begins with the prefix "M1374", please follow the steps on this page to complete your update. If your CelliGen BLU model number begins with the prefix "M1363", please see the update for CelliGen BLU (1st Generation).

Description of Changes
Software revision 02.02 incorporates the following solutions / additions to improve the performance of your bioprocess controller:
Update for Corporate Identity
Update default Proportional and Integral values for pH loop

Date/File/Version
30-Jan-2019
Update_M1374_2.02.zip
Version 2.02

Description of Changes
Update resolves communication errors with PC COM ports.

Date/File/Version
30-Jan-2019
M1295 RS232 Device Interface Kit Rev B.00 - Update.zip
Version B

Please contact your local Eppendorf service representative for assistance.
Latest version 1.1.1.386