When pipetting foaming liquids (e.g. cell culture media) I‘m transferring foam which got trapped between the epT.I.PS. 384. How can I improve?

When pipetting foaming liquids it may happen that foam adhere between the tips. Make sure to pipette slowly avoiding foam formation. Importantly, do not immerse the tip too deeply into the liquid preventing foam getting caught between the tips.

How can I decontaminate the Move It lower part?

With Xplorer plus, the lower parts are autoclavable. With Research plus the complete pipette is autoclavable.

The adjustment of cone spacing of the electronic model is not motorized. What is the reason?

When working with plates and multi-channel pipettes it is a prerequisite to have a rotatable lower part. Fixed lower parts make the work inconvenient and non-ergomic. For this reason Eppendorf has invented a lower part combining the factors "rotating" with "adjustable cone spacing". The fact, that the lower part is not fixed means that the motor for the cone space adjustment cannot be integrated in the pipette's upper part. Having a rotating lower part requires a motor in the lower part. This extra weight would have made the pipette "foot-heavy" and becoming non-ergonomic. For this reason Eppendorf decided for a manual cone spacing.

The Move It lower parts show indications for plates. I have a plate which does not fit into these formats. Can I nevertheless use the Move It pipettes?

First, please check with the option table, if you have the suitable Move It pipette availabe. Maybe you simply need a different model for your applications. In case you have an atypical vessel format you can of course also use Move It if not exceeding the distance range. Use a ruler to check which Move It model is suitable for your atypic vessel type. Within this range all distances can be set. Therefore please proceed as follows: 1) Attach tips 2) Set the two format limiters to maximum width range 3) Use the rotating knob to adjust the space between the tips until fitting to the atypic vessel 4) Set one of the format limiter to this position 5) Set the rotating knob to the second vessel type 6) Set the format limiter to this tip distance You can now work between these set limits by simply using the rotating knob.

Could you please send me an overview over the chemical resistance of the Move It lower parts?

The Move It lower parts are exclusively made of the high-tech materials we have already build in the Research plus and Xplorer pipettes. Thus the chemical resistance table for the Research plus applies also for both, the Xplorer Move It lower parts and the Research plus Move It lower parts (but not for the upper part of Xplorer due to the electronics). The list is available on the eppendorf website (Research plus / Operating Manual)

How do the Move It Pipettes become serviced?

First of all, the Move It is a normal pipette which, accordingly to ISO 8655, needs to be calibrated at least once a year. You can send the pipettes to your service provider, to the eppendorf service or do the calibration yourself. Maintenance should be performed by service providers only.

Which vessel formats is Move It suitable for?

Based on the Move It model you can apply it with vessel types having a distance between 4.5 - 33 mm. Some examples: Plates (384- / 96-/ 48-/ 24-/ 12-well formats), 0.2 / 0.5 / 1.5 / 2.0 / 5 mL tubes, different vials,ect. Check the navigator table to find the model being suitable for your specific vessel-to-vessel distance. The adjustment of the distance between the cones is stepless giving you maximum flexibility to adjust to non-standard vessel formats.

text.skipToContent text.skipToNavigation

AT | EUR

Es konnten keine Ergebnisse gefunden werden.

Such-Empfehlungen

Produkt Familien

Alle Produkt Familien anzeigen ()

Artikel

Alle Artikel anzeigen ()

Inhalte

Alle Inhalte anzeigen ()

Move It^®-Pipetten mit verstellbarem Spitzenabstand - Verstellbare Pipette

Move It_REG_ adjustable tip spacing multi-channel pipettes from Eppendorf

Move It_REG_ adjustable tip spacing multi-channel pipettes are the ideal dispensing tool when switching vessel formats

Illustration highlighting the transfer of samples from tubes to a 96-well plate or agarose gel

Tubing-free connections of cone and piston-cylinder system in adjustable tip spacing multichannel pipette

Mechanical Eppendorf Research_REG_ plus Move It_REG_ adjustable tip spacing pipette with 8 channels

Eppendorf Xplorer_REG_ plus Move It_REG_ electronic pipette with 6 adjustable channels

Move It_REG_ Adjustable Tip Spacing Pipettes: Transparent Lower Part in Action (GIF, Frontal View)

Move It_REG_ Adjustable Tip Spacing Pipettes: Transparent Lower Part in Action (GIF, Side View)

Female Scientist using Eppendorf Research_REG_ plus Move It_REG_ Pipette for Easy Liquid Transfer Between Vessel Formats

Scientist using a Move It_REG_ adjustable tip spacing pipette to transfer liquid from a series of tubes to a plate

Scientist using a Move It_REG_ adjustable tip spacing pipette to dispense liquid into a 384-well plate

The software of your Eppendorf Xplorer_REG_ plus pipette can easily be updated using the Pipette Software Update Tool

Produktinformationen

Transferieren Sie regelmäßig Proben von einem Gefäßformat ins andere ‒ zum Beispiel von Reaktionsgefäßen zu Platten ‒ und suchen eine effizientere und sicherere Lösung? Die neue Pipette Move It mit justierbarem Spitzenabstand beschleunigt und vereinfacht das gleichzeitige Pipettieren von mehreren Proben. Das einzigartige Design ohne Schlauchverbindungen sorgt für eine erhöhte Präzision und Strapazierfähigkeit sowie die Sicherheit von Benutzer und Probe.

Weitere Produktinformationen anzeigen