Are Eppendorf Microcentrifuges equipped with an imbalance switch-off function?

Yes, Microcentrifuges are equipped with an imbalance detection. As soon as an imbalance is detectetd, an error message occurs on the display and the run is stopped automatically.

What are the noise levels of Eppendorf Microcentrifuges?

The noise level of Eppendorf Microcentrifuges ranges from 49 dB(A) to 58 dB(A). What does that mean? Here are some examples of every day life noises: 45 db(A) - a quiet library or soft conversation at home 50 db(A) - the hum of a refrigerator 58 db(A) - dishwasher running in the next room Eppendorf Microcentrifuges have a very moderate noise level though. Please find the exact numbers in the section technical data on the respective homepages or in the respective Operating Manuals.

How can Eppendorf Micro- and Multipurpose centrifuges be opened in case of a power failure?

Each Eppendorf centrifuge is equipped with an emergency lid release. The centrifuge lid can be opened e.g. with the support of the rotor key. Detailed description of this topic is listed in the respective Operating Manual which can be downloaded from the Eppendorf homepage.

What is the minimum selectable rotational speed of an Eppendorf Microcentrifuge?

The minimum selectable speed is 100 rpm or 1 rcf (g-force).

Can the fixed-angle rotors of Eppendorf Microcentrifuges be operated without rotor lids?

The fixed-angle rotor FA-45-18-11 can be used with or without rotor lid. With rotor lid the centrifugation is aerosol-tight and the Centrifuge 5418/5418 R is even quieter. The aerosol-tight centrifugation can only be carried out with the rotor lid. Especially when working with pathogenic microorganisms, we recommend the usage of the aerosol-tight lid. When centrifuging filter devices like spin columns or other comparable tubes, the aerosol-tight rotor lid must be used in any case. This protects the centrifuge from damage – e. g. by torn-off tube lids.

Which tubes can be used in the Centrifuge 5418/5418 R?

1.5 ml and 2.0 ml Eppendorf ® tubes can be spun in the Centrifuge 5418/5418 R. With the help of adapters, the centrifugation of 0.2 ml PCR tubes, 0.6 ml Microtainer, 0.5 ml and 0.4 ml micro tubes is also possible. Even so-called spin columns (e.g. Quiagen, Macherey-Nagel, Vivascience) can be centrifuged. For centrifugation of spin columns, the rotor lid must be used.

For which applications the Centrifuge 5418 R can be used?

Centrifuge 5418 R allows a broad variety of applications. Up to 18 micro test tubes can be centrifuged at 16,873 x g. It can be used with tubes from 0.2 up to 2.0 mL. Possible applications include: - Isolation of DNA, RNA and proteins - Spin columns / Filter inserts - Aerosol-tight centrifugation of infectious samples - Pelletizing of cells (bacteria, eukaryotic cells) up to 2.0 mL - Spin down of PCR mixtures in tubes

What is the FastTemp function of refrigerated Eppendorf Micro- and Multipurpose centrifuges?

The FastTemp function is a specific temperature control run which was developed to reach the set temperature as quickly as possible. This temperature control run can already be started during sample preparation by pressing the FastTemp button. This enables a centrifugation at the desired temperature directly after sample preparation without time loss. Please find more detailed information of the FastTemp function in the respective operating manuals of Eppendorf Micro- and Multipurpose centrifuges on the Eppendorf homepage.

Does the Centrifuge 5418 R has an energy saving function?

Yes, the ECO shut-off automatically switchs off the compressor after 8 hours of non-use.

How can Eppendorf Micro- and Multipurpose centrifuges be cleaned?

For cleaning and disinfection of Eppendorf centrifuges you will find detailed information in the respective operating manuals which can be found in the section manuals on this page. Furthermore we recommend the following papers which can be found in the section Notes&Papers on the Eppendorf homepage. - Whitepaper 014 - Maintenance Poster - Logfile for Routine Maintenance

Can I use both - rpm and g-force (rcf) - to set the speed parameter of an Eppendorf Microcentrifuge?

Yes. Each Eppendorf Microcentrifuge has the possibility to use rpm or g-force (rcf) to set the speed. It is equipped with a special button to easily change between rpm and rcf. For the centrifuges Minispin / Minispin plus a combination of buttons have to be pressed. Please refer to the devices Operating Manuals for more detailed information. Information available on the product page on eppendorf.com.

What is the advantage of the automatic lid release of Eppendorf Microcentrifuges?

The automatic lid release is a feature of Eppendorf's air cooled Microcentrifuges. It can be switched On and Off via the centrifuges operating menu. If it is activated, the centrifuge lid opens automatically once the centrifugation run is finished. This allows quicker access to the samples and avoids possible heat build-up. In addition, the open lid is a clear signal - even from a distance - that the centrifugation run has ended. This function has not been implemented in the refrigerated microcentrifuges from Eppendorf, as a set temperature can be set there which should also be maintained after the end of a centrifuge run.

Does the lid latch have to be serviced or greased at regular intervals?

No, in order to ensure the full functionality of the lid latch, it must not be cleaned or greased. If you feel that this is nevertheless necessary, please contact our Technical Service. The contact address can be found in the operating manual of your centrifuge.

For what applications are aerosol-tight rotors important?

Aerosol-tight rotors are always recommended or even prescribed when working with hazardous or potentially hazardous substances. These can, for example, be viruses, pathogenic bacteria, potentially infectious blood samples or radioactive sample material.

What is the Short Spin function of Eppendorf Micro- and Multipurpose centrifuges?

The Short Spin function was developed to be able to perform a quick centrifuge run without having to set parameters. To start a short spin centrifugation, simply press the short key. Centrifugation will continue for as long as it is pressed. Please find detailed information on this function in the respective devices manual which can be found on their Eppendorf hompages.

How do I recognize aerosol-tight rotors?

Firstly, the aerosol-tight rotors can be recognized by their designation abbreviation “FA” or “AT”; secondly, Eppendorf has color-coded the aerosol-tight rotors. All aerosol-tight rotors have a red rotor lid screw, and a red ring is printed on to the rotor shaft.

text.skipToContent text.skipToNavigation

CN | CNY

Sorry, we couldn't find anything on our website containing your search term.

Centrifuge 5418 R

离心机5418 R用Eppendorf微型离心机转子FA-45-18-11，带孔盖

请注意：本产品已停止销售。

停产日期：4月 2026

下面您将找到支持文件。对于设备，还列出了可用的服务、配件和备件。

替代产品：

Centrifuge 5425/5425 R

通用实验室产品版本
Discontinued product

产品信息

小巧静音、操作便捷的台式微量离心机

Eppendorf Centrifuge 5418 R专为日常分子生物学应用而设计。5418R微量离心机体型小巧、运行安静、操作便捷，是实验室离心操作的理想之选。每次运行可同时处理18份样本，适配1.5/2.0 mL离心管和Microtainers^®，最大相对离心力16,873 × g。

显示更多产品信息

索取演示版

您可以在以下网址找到其他下载资料本页面底部

Services (14)

转子 (1)

附件 (1)

14 Services

离心机服务 - 安装

微型离心机, 冷冻型

更多产品详情...

目录编号 0082020131

添加到列表

离心机维护与保养服务 - AdvancedCare

微型离心机, 冷冻型, 服务协议

更多产品详情...

目录编号 0082020326

添加到列表

离心机维护与保养服务 - PremiumCare

微型离心机, 冷冻型, 服务协议

更多产品详情...

目录编号 0082020321

添加到列表

离心机维护与保养服务 - Device Check

基础清洁和检测
微型离心机，具有冷冻功能

更多产品详情...

目录编号 0082020271

添加到列表

离心机维护与保养服务 - Device Check

基础清洁和检测
微型离心机，无冷冻功能

更多产品详情...

目录编号 0082020270

添加到列表

离心机维护与保养服务 - Preventive Maintenance

微型离心机, 冷冻型, 全面维护

更多产品详情...

目录编号 0082020261

添加到列表

离心机维护与保养服务 - Preventive Maintenance

微型离心机, 非冷冻, 全面维护

更多产品详情...

目录编号 0082020260

添加到列表

Maintenance and Certification epServices

离心机维护与保养服务 - IQ/OQ - GxP

微型离心机, 冷冻型, 安装验证和操作验证

更多产品详情...

目录编号 0082020301

添加到列表

Certification epServices, Application Support

离心机维护与保养服务 - OQ - GxP

微型离心机, 冷冻型, 操作验证

更多产品详情...

目录编号 0082020306

添加到列表

离心机维护与保养服务 - 1 年延保服务

微型离心机, 冷冻型, 服务协议

更多产品详情...

目录编号 0082020341

添加到列表

显示更多产品

已添加到您的购物车

产品信息

特征

Centrifuge 5418 R, 配备18孔转子，专为1.5/2.0 mL离心管和Microtainers^®等中小容量容器设计。最大相对离心力16,873 × ×g，适用于各类标准分子生物学和临床应用。仪器操作高度极低，运行过程十分安静。因此，5418R用户友好型离心机是实验室的理想选择。

Eppendorf QuickLock^®符合人体工程学的转子盖操作

配备独特QuickLock盖子的离心机转子 − 只需转动 1/4 圈，即可快速、安全地锁定转子盖。这种转子可确保离心机的气密性，能够安全离心危险性样品（例如病毒、病原体细菌、血样或放射性标记探针）。

是否已购买Eppendorf产品？

完成EppendorfCentrifuge 5418 R 注册即可享有以下权益：
• 每注册一件产品即可获得100epPoints^®，可在积分商城兑换奖品
• 完成离心机、摇床、CO₂培养箱或循环仪注册可享额外3个月保修
• 每注册一件产品即可参与一次专属Eppendorf抽奖
• 专属产品故事刊登在Eppendorf官网

注册步骤超级简单！共有两种方式：
1、下载Eppendorf 应用程序，扫描并注册；
2、访问Eppendorf官网，登录您的myEppendorf账号并输入产品序列号
更多信息请访问：www.eppendorf.link/product-registration

生命周期结束

包装材料处置与回收
在实验室中，回收利用的重要性与日俱增。值得注意的是，欧洲几乎已实现纸板材料全部回收。为此，我们专门开发出包含约 50%回收纸板的新型离心机包装材料。我们呼吁所有客户响应全球可持续发展倡议，建立内部回收制度并设置合适回收容器，实现纸板材料全部回收。
除纸板外，5418R离心机的包装材料还包括木制托架、LD-PE塑料防尘罩和泡沫构件。建议选择一家专门从事聚乙烯材料回收的合作伙伴负责回收塑料防尘罩和泡沫构件。您也可联系本地废物运输商或设施管理团队，了解适合您所在企业的回收方案。
深入了解我们为提高包材可持续性所做出的努力

实验仪器处置
Eppendorf Centrifuge 5418 R使用寿命长达数年，如需更换，请务必遵守当地有关此类仪器处置的规定和要求。我们强烈建议您在具有主动制冷仪器方面具有丰富经验的经认证本地回收合作伙伴。坚持“本地”回收处置能够减少运输影响。若需处置5418R冷冻型离心机，为确保安全且可持续地清除并回收冷冻液，建议选择“认证”回收合作伙伴。

去污
由于微量离心机往往在实验室环境下使用且常用于离心生物样本，因此应在处置 5418 R离心机前进行去污处理。如需了解本地去污要求，请联系所在地生物安全官和/或废物管理员。处置离心机时，还需确认本地回收合作伙伴是否有其他特殊规定和/或文档要求。过程中可参考Eppendorf去污表。