What materials are Combitips advanced made of and what chemicals are they resistant to?

Please refer to the Instructions for Use and the chemical resistance sheet of the Combitips advanced on our homepage for detailed information.

How are the Combitips advanced tested during production?

Combitips advanced are produced according to a validated quality management and the production process is checked with daily spot tests according to standard operation procedures using the multipette and Combitips advanced system. The acceptance criteria here are the measurement errors, which are listed in the Instructions for Use. Please check the Certificate of Quality, which confirms the manufacturing process of Eppendorf dispenser tips according to ISO norms.

Which certificates are available for Combitips advanced?

Please check www.eppendorf.com/certificates for general and lot specific certificates available for Combitips advanced.

Are Combitips advanced manufactured in purity grade "Eppendorf Quality" also sterile?

No, Combitips advanced manufactured in purity grade "Eppendorf Quality" are packed straight from production, but they are not specially sterilized. Combitips advanced in purity grade "Biopur" are recommended if sterile dispenser tips are necessary for the application.

Are Combitips advanced autoclavable?

Combitips advanced are not autoclavable as they are made of materials which are impacted by autoclaving. This could lead to leakage affecting the performance of Combitips advanced. Please note, that Combitips advanced are single-use consumables. Combitips advanced in purity grade "Biopur" are recommended if sterile dispenser tips are necessary for the application.

Are the Biopur Combitips advanced tested according to USP and EP?

Yes, they are. This information is also given on the corresponding certificate.

Does a Combitip advanced always have to be filled to the total volume?

Combitips advanced do not have to be completely filled for dispensing. As usually the 1st dispensing step must be discarded to perform the reverse stroke. Using the mechanical Multipette M4 with partially filled Combitips advanced, the number of dispensing steps for reverse stroke depends on the set dispensing volume. Please refer to the Instructions for Use for detailed information.

Are Combitips advanced resistant to trifluoroacetic acid?

This substance was tested separately. The test result for trifluoroacetic acid with a concentration below of 50% shows that Combitips can be used. Therefore higher concentrated trifluoroacetic acid (größer 50%) the resistant is dependent on the exposure time.

What is the Combitips advanced Box 2.0 made of?

The Combitips advanced Box 2.0 is made of polycarbonate (PC).

Is the Combitips advanced Box 2.0 autoclavable?

The Combitips advanced Box 2.0 can be autoclaved without any Combitips advanced up to 100 times under standard autoclaving conditions (121 °C, 1 bar overpressure, 20 min).

Are Combitips advanced and ViscoTip certified free from slip agents?

Yes, Combitips advanced and ViscoTip are produced without using slip agents. Please check www.eppendorf.com/certificates for the lot-independant certificate.

Are Combitips advanced and ViscoTip certified free from trace metals?

Please check www.eppendorf.com/certificates for the lot-independant certificate confirming typical low values of trace metals in Combitips advanced and ViscoTip.

Why can Multipette M4 and E3/E3x only be operated with Combitips advanced?

When using a positive displacement system, the dispenser and the dispenser tip must be perfectly matched. This will ensure that the high demands with regard to precision and accuracy are reliably met. Combitips advanced are perfectly matched to Eppendorf Multipette M4 and E3/E3x and M4. Combined with the center sleeve of the devices, accurate dosing for dispensing is supported in particular.

Can Combitips advanced be used for dispensing high-proof alcohols?

Yes, Combitips ® advanced can be used to dispense high-proof alcohols. Using the 5 mL and 10 mL Combitips ® advanced tip sizes with ≥70 % alcohol the dispenser tips have to be prewetted once with the solution. This volume has to be dispensed including the remaining stroke.

text.skipToContent text.skipToNavigation

CN | CNY

Sorry, we couldn't find anything on our website containing your search term.

Combitips^® advanced - 分液管

Combitips® advanced positive displacement pipette tips are available in nine different volume sizes

用于EppendorfMultipette®多道分液器的Eppendorf Combitips® advanced多道分液器吸头类别

Eppendorf Combitips® advanced 1 mL注射器式外置活塞移液器吸头

用于Eppendorf Multipette®多道分液器的Combitips® advanced外置活塞式吸头

The Combitips® advanced Box 2.0 from Eppendorf (sold separately) allows for ergonomic, single-handed tip attachment

Eppendorf Combitips® advanced外置活塞移液器吸头配备带有移动滑槽的收纳盒

Multipette® M4 Multi-Dispenser Held By Scientist (Product Close-Up)

Multipette® E3x Electronic Multi-Dispenser Held By Scientist (Product Close-Up)

ACT label of sustainability certification for Eppendorf Combitips advanced 10 mL (orange) (0030089677)

产品信息

Combitips advanced分液吸头能够优化工作板或大量其他容器分液操作流程，同时精确移取粘性和挥发性液体。此款正偏移移液吸头是所有EppendorfMultipette^®分液移液器的首选耗材，相比前代产品Combitips plus具有多重优势。Eppendorf分液管共推出九种容量规格（0.1 mL  – - 50 mL），最小步进量低至100纳升，具体取决于Multipette所用分液器型号。

显示更多产品信息

您可以在以下网址找到其他下载资料本页面底部

产品信息

技术数据

用途

特征

Multipette^®分液器首选吸头，由Eppendorf 专业研发

Combitips advanced分液管采用革命性设计，可为现代实验室带来诸多益处。配备一体式活塞，遵循正位移原理工作，确保无论液体物理性质（如粘度、挥发性、密度、温度）如何，均能准确分配设定体积。因此，您可以完成高精度分液操作，不受液体流动特性的影响。此外，密封活塞可防止气溶胶污染，让您安全处理放射性或有毒物质。

Eppendorf于1978年首次推出Multipette /Combitips多次分液系统，并于之后进行多次改进。这是首款能够实现一次吸液多次分液的移液系统。其设计理念仍是提升液体处理效率的核心驱动力，并已成为众多涉及孔板或样品管系列移液操作的实验室的标配。2023年，EppendorfCombitips advanced分液管系列成功通过非盈利机构My Green Lab^®认证，获发ACT ^®环境影响因子标签，成为寻求更可持续产品实验室的理想选择。

Multipette分液器具备分液体积调节功能

M4与E3/E3x Eppendorf分液器完美适配Combitips advanced分液管。可在1 µL - 10 mL范围内轻松选择任意分液体积，具体取决于所用Combitips advanced分液管量程。每个Combitips advanced分液管可设置20种不同的分液容量。根据所需容量，Combitips advanced分液管吸满液体后可执行5至100个分液步骤。点击“手册”下载技术参数表，了解更多信息。

观看视频，学习如何使用 Multipette null M4 分液器和Combitips advanced吸头移取粘性液体。

多种量程和纯度级可供选择，确保满足多种应用需求

分液管共推出9种量程（0.1 mL - 50 mL）和4个纯度级（Eppendorf Quality 、PCR clean 、Biopur^® 和Forensic DNA Grade），总有一款能够满足您的Combitips advanced应用需求！

• “ Eppendorf Combitips advanced ”最高纯度级Biopur采用独立泡罩包装，完全无菌且不含热原、核糖核酸酶、脱氧核糖核酸酶、DNA、ATP以及PCR抑制剂。敏感型实验室应用的理想选择
• Combitips advanced 分液管(‘Forensic DNA Grade’纯度级) 符合ISO 18385标准要求，特别适用于法医学应用和DNA分离与分析。
• “ PCR clean ”Eppendorf分液管经认证，不含人类DNA、核糖核酸酶、脱氧核糖核酸酶和可能对PCR应用产生负面影响的抑制剂。
• “ Eppendorf Quality ”纯度级是日常应用的理想选择——吸头散装运输，满足各类非关键实验室应用对可靠、易用分液器的一切需求。
• 对于200 mPa*s至14.0000m Pa*s高粘性液体，请考虑使用Eppendorf粘性液体专用分液管 ViscoTip.。
此款吸头容量10 mL，现已推出Eppendorf Quality.优质级。

如需了解有关产品质量和纯度等级的更多信息，请访问我司专属微网站。

如需下载Combitips advanced批次特定证书，请点击此处：www.eppendorf.link/certificates.

Eppendorf Combitips advanced分液管与标准实验室样品管的兼容性

加长型Combitips^® advanced（2.5 mL、5 mL和10 mL）能够完全吸取所有普通样品管的液体，可防止样品损失。

您如何辨识Eppendorf原产的Combitip？

清楚地Eppendorf：所有原装Combitips advanced正位移吸头在冠部边缘有一“圈”水滴状凸纹。

包装材料以及用过Combitips advanced分液管

Combitips advanced的包装包含板和泡罩材料以及塑料制成的包装箔。Eppendorf分液器的包装材料含有至少92%再生纸板。请收集纸板包装材料并将其放入合适的回收容器，以支持回收有价值原材料的全球可持续发展倡议。对于由聚酰胺（PA）和聚乙烯（PE）制成的塑料包装，我们建议选择可以回收PA和PE材料的专门回收合作伙伴。

使用之后，Combitips advanced分液管可能被污染，可能带来生物危害、化学危害甚至核危害。在许多国家，由于法律限制，危险（或“关键”）实验室废物通常不能回收，必须焚烧。为减少危险塑料废物产生量，应至少准备两个垃圾箱：一个用于放置危险废物，一个用于放置非危险废物。这两组的确切定义可能取决于当地法规，应相应在实验室进行沟通/培训。如需了解更多有关当地垃圾回收方案的信息，请联系当地生物安全官员和废物管理部门。我们建议您与具有实验室废物处理经验的本地认证回收合作伙伴合作。

阅读更少

规格	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced

ACT 标签	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是
产品类型	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材
移液类型	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统
吸头尺寸	0.1 mL	0.1 mL	0.1 mL	0.2 mL	0.2 mL	0.2 mL	0.5 mL	0.5 mL	0.5 mL	1.0 mL	1.0 mL	1.0 mL	1.0 mL	2.5 mL	2.5 mL	2.5 mL	2.5 mL	5.0 mL	5.0 mL	5.0 mL	5.0 mL	10 mL	10 mL	10 mL	25 mL	25 mL	25 mL	50 mL	50 mL	50 mL
Color code	白色	白色	白色	淡蓝色	淡蓝色	淡蓝色	紫色	紫色	紫色	黄色	黄色	黄色	黄色	绿色	绿色	绿色	绿色	蓝色	蓝色	蓝色	蓝色	桔黄色	桔黄色	桔黄色	红色	红色	红色	浅灰色	浅灰色	浅灰色
移液颜色	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头
纯度级别	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Forensic DNA Grade法医DNA级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Forensic DNA Grade法医DNA级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Forensic DNA Grade法医DNA级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级
包装材料	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 箱 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 可重复封口袋 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 包 × 25 个), 独立塑膜包装, 每箱内含有 1 个适配器	100 个 (4 箱 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 可重复封口袋 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 包 × 25 个), 独立塑膜包装, 每箱内含有 1 个适配器
开放系统（第三方耗材）	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否

Multipette E3 & E3x / Repeater E3 & E3x性能参数
随机测量误差	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL
系统测量误差	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL
体积范围	1 – 100 µL	1 – 100 µL	1 – 100 µL	2 – 200 µL	2 – 200 µL	2 – 200 µL	5 – 500 µL	5 – 500 µL	5 – 500 µL	10 – 1,000 µL	10 – 1,000 µL	10 – 1,000 µL	10 – 1,000 µL	25 – 2,500 µL	25 – 2,500 µL	25 – 2,500 µL	25 – 2,500 µL	50 – 5,000 µL	50 – 5,000 µL	50 – 5,000 µL	50 – 5,000 µL	100 – 10,000 µL	100 – 10,000 µL	100 – 10,000 µL	250 – 25,000 µL	250 – 25,000 µL	250 – 25,000 µL	500 – 50,000 µL	500 – 50,000 µL	500 – 50,000 µL

Multipette M4 / Repeater M4性能参数
随机测量误差	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL
系统测量误差	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL
体积范围	1 – 20 µL	1 – 20 µL	1 – 20 µL	2 – 40 µL	2 – 40 µL	2 – 40 µL	5 – 100 µL	5 – 100 µL	5 – 100 µL	100 – 200 µL	100 – 200 µL	100 – 200 µL	100 – 200 µL	25 – 500 µL	25 – 500 µL	25 – 500 µL	25 – 500 µL	50 – 1,000 µL	50 – 1,000 µL	50 – 1,000 µL	50 – 1,000 µL	100 – 2,000 µL	100 – 2,000 µL	100 – 2,000 µL	250 – 5,000 µL	250 – 5,000 µL	250 – 5,000 µL	500 – 10,000 µL	500 – 10,000 µL	500 – 10,000 µL