What materials are Combitips advanced made of and what chemicals are they resistant to?

Please refer to the Instructions for Use and the chemical resistance sheet of the Combitips advanced on our homepage for detailed information.

How are the Combitips advanced tested during production?

Combitips advanced are produced according to a validated quality management and the production process is checked with daily spot tests according to standard operation procedures using the multipette and Combitips advanced system. The acceptance criteria here are the measurement errors, which are listed in the Instructions for Use. Please check the Certificate of Quality, which confirms the manufacturing process of Eppendorf dispenser tips according to ISO norms.

Which certificates are available for Combitips advanced?

Please check www.eppendorf.com/certificates for general and lot specific certificates available for Combitips advanced.

Are Combitips advanced manufactured in purity grade "Eppendorf Quality" also sterile?

No, Combitips advanced manufactured in purity grade "Eppendorf Quality" are packed straight from production, but they are not specially sterilized. Combitips advanced in purity grade "Biopur" are recommended if sterile dispenser tips are necessary for the application.

Are Combitips advanced autoclavable?

Combitips advanced are not autoclavable as they are made of materials which are impacted by autoclaving. This could lead to leakage affecting the performance of Combitips advanced. Please note, that Combitips advanced are single-use consumables. Combitips advanced in purity grade "Biopur" are recommended if sterile dispenser tips are necessary for the application.

Are the Biopur Combitips advanced tested according to USP and EP?

Yes, they are. This information is also given on the corresponding certificate.

Does a Combitip advanced always have to be filled to the total volume?

Combitips advanced do not have to be completely filled for dispensing. As usually the 1st dispensing step must be discarded to perform the reverse stroke. Using the mechanical Multipette M4 with partially filled Combitips advanced, the number of dispensing steps for reverse stroke depends on the set dispensing volume. Please refer to the Instructions for Use for detailed information.

Are Combitips advanced resistant to trifluoroacetic acid?

This substance was tested separately. The test result for trifluoroacetic acid with a concentration below of 50% shows that Combitips can be used. Therefore higher concentrated trifluoroacetic acid (größer 50%) the resistant is dependent on the exposure time.

What is the Combitips advanced Box 2.0 made of?

The Combitips advanced Box 2.0 is made of polycarbonate (PC).

Is the Combitips advanced Box 2.0 autoclavable?

The Combitips advanced Box 2.0 can be autoclaved without any Combitips advanced up to 100 times under standard autoclaving conditions (121 °C, 1 bar overpressure, 20 min).

Are Combitips advanced and ViscoTip certified free from slip agents?

Yes, Combitips advanced and ViscoTip are produced without using slip agents. Please check www.eppendorf.com/certificates for the lot-independant certificate.

Are Combitips advanced and ViscoTip certified free from trace metals?

Please check www.eppendorf.com/certificates for the lot-independant certificate confirming typical low values of trace metals in Combitips advanced and ViscoTip.

Why can Multipette M4 and E3/E3x only be operated with Combitips advanced?

When using a positive displacement system, the dispenser and the dispenser tip must be perfectly matched. This will ensure that the high demands with regard to precision and accuracy are reliably met. Combitips advanced are perfectly matched to Eppendorf Multipette M4 and E3/E3x and M4. Combined with the center sleeve of the devices, accurate dosing for dispensing is supported in particular.

Can Combitips advanced be used for dispensing high-proof alcohols?

Yes, Combitips ® advanced can be used to dispense high-proof alcohols. Using the 5 mL and 10 mL Combitips ® advanced tip sizes with ≥70 % alcohol the dispenser tips have to be prewetted once with the solution. This volume has to be dispensed including the remaining stroke.

text.skipToContent text.skipToNavigation

CN | CNY

Sorry, we couldn't find anything on our website containing your search term.

Combitips^® advanced - 分液管

Combitips® advanced positive displacement pipette tips are available in nine different volume sizes

ACT label of sustainability certification for Eppendorf Combitips advanced Eppendorf Quality 10 mL

用于EppendorfMultipette®多道分液器的Eppendorf Combitips® advanced多道分液器吸头类别

Eppendorf Combitips® advanced 1 mL注射器式外置活塞移液器吸头

用于Eppendorf Multipette®多道分液器的Combitips® advanced外置活塞式吸头

The Combitips® advanced Box 2.0 from Eppendorf (sold separately) allows for ergonomic, single-handed tip attachment

Eppendorf Combitips® advanced外置活塞移液器吸头配备带有移动滑槽的收纳盒

Multipette® M4 Multi-Dispenser Held By Scientist (Product Close-Up)

Multipette® E3x Electronic Multi-Dispenser Held By Scientist (Product Close-Up)

产品信息

使用Combitips advanced分液吸头优化您的工作流程，包括工作板或其他容器连续移液，精准吸取粘性和挥发性液体。这些外置活塞式吸头是Eppendorf所有Multipette^®多道分液器的理想耗材选择，并且与前代Combitips plus相比，具备许多优点。提供 9 种量程（0.1 mL – 50  mL），Combitips advanced具备宽泛的分液范围，体积增量低至100 nL (具体取决于所使用的Multipette 型号

显示更多产品信息

您可以在以下网址找到其他下载资料本页面底部

产品信息

技术数据

用途

特征

精确适配Multipette^®Eppendorf分液器的优质吸头。

Combitips advanced移液吸头采用革命性设计，为您的现代实验室工作提供了许多好处。它它们集成活塞，采用外置活塞工作原理，无论液体的物理性质如何（例如粘度、挥发性、密度或温度），均能分配正确体积的液体。因此，您可以完成高精度分液操作，不受液体流动特性的影响。此外，密封活塞可防止气溶胶污染，让您安全处理放射性或有毒物质。

Eppendorf 1978年，首创 Multipette/Combitips 分液器系统，并在此后对其进行多次改进。这是一款仅需一次吸液便可进行多次分液的移液系统。这一创新概念仍在推动高效液体系统不断发展，该款产品也成为众多实验室完成孔板或多个试管移液的必备产品。2023年， Combitips advanced 移液吸头系列获得ACT^®非营利组织颁发的My Green Lab^®环境影响因子标签，成为寻求可持续产品实验室的理想选择。

M4 手动分液器 Multipette具备分液体积调节功能

Multipette M4 与 Multipette E3/E3x 分液器均可完美适配 EppendorfCombitips advanced正位移移液吸头。根据所使用的Combitips advanced外置活塞式移液吸头，您可以轻松选择1 µL到10 mL内的容量范围。每个Combitips advanced吸头可设置20种不同的分液容量。根据所需容量，Combitips advanced吸头吸满液体后可执行5至100个分液步骤。如需了解更多信息，请查阅技术参数表，可点击下方“Manuals”下载。

多种量程和纯度级可供选择，满足各种应用需求

分液吸头现已推出9种量程（0.1 - 50 mL）和4种纯度级（Eppendorf Quality 、PCR clean 、 Biopur^®和Forensic DNA Grade），总有一款Combitips advanced能够满足您的应用需求！

• Combitips advanced最高纯度级Biopur采用独立泡罩包装，无菌，不含热原、RNA酶、DNA酶、DNA、ATP和PCR抑制剂。实验室最敏感应用的理想选择
• “Combitips advanced”纯度级Forensic DNA Grade’符合ISO 18385标准，尤其适用于法医学应用以及DNA分离和分析。
• “PCR clean”吸头经认证不含人DNA、DNA酶、RNA酶和可能对PCR应用产生不利影响的抑制剂。
• “Eppendorf Quality”纯度级是日常应用的理想选择，采用散货包装发运，能够满足用户对可靠、易用型多道分液吸头的一切要求，适用于实验室各种关键应用。
• 对于粘度200 -14.0000 mPa*s的高粘性液体，请考虑使用ViscoTip. 。

如需了解有关产品质量和纯度级的更多信息，请访问我们专门建立的微网站。如需下载Combitips advanced批次特定证书，请点击此处：www.eppendorf.com/certificates。

Combitips advanced与标准实验室试管的兼容性

加长型Combitips^® advanced（2.5 mL、5 mL和10 mL）能够完全排空所有普通试管，并防止样品丢失。

您如何辨识Eppendorf原产的Combitip？
清楚地Eppendorf：所有原装的Combitips advanced特点是吸头脱卸部位边缘一圈具有水滴状凹纹。

包装材料以及用过的分液器吸头的Combitips advanced处置

分液器吸头Combitips advanced的包装包含板和泡罩材料以及塑料制成的包装箔。 Combitips 运输时采用至少包含92%回收纸板的材料包装。请收集纸板包装材料并将其放入合适的回收容器，以支持回收有价值原材料的全球可持续发展倡议。对于由聚酰胺（PA）和聚乙烯（PE）制成的塑料包装，我们建议选择可以回收PA和PE材料的专门回收合作伙伴。

使用之后，Combitips advanced移液器吸头可能被污染，可能带来生物危害、化学危害甚至核危害。在许多国家，由于法律限制，危险（或“关键”）实验室废物通常不能回收，必须焚烧。为了减少危险塑胶垃圾，您应该至少使用两种废物容器：一种用于收集危险废物，一种用于收集非危险废物。这两组的确切定义可能取决于当地法规，应相应在实验室进行沟通/培训。如需了解更多有关当地垃圾回收方案的信息，请联系当地生物安全官员和废物管理部门。我们建议您与具有实验室废物处理经验的本地认证回收合作伙伴合作。

阅读更少

规格	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced	Combitips^® advanced

ACT 标签	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是	是
产品类型	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材	耗材
移液类型	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统	外置活塞系统
吸头尺寸	0.1 mL	0.1 mL	0.1 mL	0.2 mL	0.2 mL	0.2 mL	0.5 mL	0.5 mL	0.5 mL	1.0 mL	1.0 mL	1.0 mL	1.0 mL	2.5 mL	2.5 mL	2.5 mL	2.5 mL	5.0 mL	5.0 mL	5.0 mL	5.0 mL	10 mL	10 mL	10 mL	25 mL	25 mL	25 mL	50 mL	50 mL	50 mL
Color code	白色	白色	白色	淡蓝色	淡蓝色	淡蓝色	紫色	紫色	紫色	黄色	黄色	黄色	黄色	绿色	绿色	绿色	绿色	蓝色	蓝色	蓝色	蓝色	桔黄色	桔黄色	桔黄色	红色	红色	红色	浅灰色	浅灰色	浅灰色
移液颜色	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头	无色吸头
纯度级别	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Forensic DNA Grade法医DNA级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Forensic DNA Grade法医DNA级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Forensic DNA Grade法医DNA级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级	Eppendorf Quality优质级	PCR 洁净级	Biopur^®生物纯级
包装材料	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个, 独立塑膜包装	100 个 (4 包 × 25 个)	100 个 (4 可重复封口袋 × 25 个)	100 个, 独立塑膜包装	100 个 (4 箱 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 可重复封口袋 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 包 × 25 个), 独立塑膜包装, 每箱内含有 1 个适配器	100 个 (4 箱 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 可重复封口袋 × 25 个), 每箱内含有 1 个适配器。	100 个 (4 包 × 25 个), 独立塑膜包装, 每箱内含有 1 个适配器
开放系统（第三方耗材）	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否	否

Multipette E3 & E3x / Repeater E3 & E3x 移液器的性能数据
随机测量误差	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	1 µL: ± 14%; ± 0.14 µL 10 µL: ± 2.5%; ± 0.25 µL 50 µL: ± 1.5%; ± 0.75 µL 100 µL: ± 0.5%; ± 0.5 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	2 µL: ± 5.5%; ± 0.11 µL 20 µL: ± 1.5%; ± 0.3 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 0.5%; ± 1 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	5 µL: ± 6%; ± 0.3 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.5%; ± 1.25 µL 500 µL: ± 0.3%; ± 1.5 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	10 µL: ± 7%; ± 0.7 µL 100 µL: ± 0.55%; ± 0.55 µL 500 µL: ± 0.3%; ± 1.5 µL 1000 µL: ± 0.2%; ± 2 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	25 µL: ± 3.5%; ± 0.875 µL 250 µL: ± 0.45%; ± 1.125 µL 1250 µL: ± 0.3%; ± 3.75 µL 2500 µL: ± 0.15%; ± 3.75 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	50 µL: ± 6%; ± 3 µL 500 µL: ± 0.35%; ± 1.75 µL 2500 µL: ± 0.25%; ± 6.25 µL 5000 µL: ± 0.15%; ± 7.5 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	100 µL: ± 3.5%; ± 3.5 µL 1000 µL: ± 0.25%; ± 2.5 µL 5000 µL: ± 0.25%; ± 12.5 µL 10000 µL: ± 0.15%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	250 µL: ± 3%; ± 7.5 µL 2500 µL: ± 0.35%; ± 8.75 µL 12500 µL: ± 0.25%; ± 31.25 µL 25000 µL: ± 0.15%; ± 37.5 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL	500 µL: ± 3%; ± 15 µL 5000 µL: ± 0.5%; ± 25 µL 25000 µL: ± 0.2%; ± 50 µL 50000 µL: ± 0.15%; ± 75 µL
系统测量误差	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	1 µL: ± 11%; ± 0.11 µL 10 µL: ± 1.6%; ± 0.16 µL 50 µL: ± 1%; ± 0.5 µL 100 µL: ± 1%; ± 1 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	2 µL: ± 4%; ± 0.08 µL 20 µL: ± 1.3%; ± 0.26 µL 100 µL: ± 1%; ± 1 µL 200 µL: ± 1%; ± 2 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	5 µL: ± 3%; ± 0.15 µL 50 µL: ± 0.9%; ± 0.45 µL 250 µL: ± 0.9%; ± 2.25 µL 500 µL: ± 0.9%; ± 4.5 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	10 µL: ± 3.5%; ± 0.35 µL 100 µL: ± 0.9%; ± 0.9 µL 500 µL: ± 0.6%; ± 3 µL 1000 µL: ± 0.6%; ± 6 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	25 µL: ± 2%; ± 0.5 µL 250 µL: ± 0.8%; ± 2 µL 1250 µL: ± 0.5%; ± 6.25 µL 2500 µL: ± 0.5%; ± 12.5 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	50 µL: ± 2.5%; ± 1.25 µL 500 µL: ± 0.8%; ± 4 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.5%; ± 25 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	100 µL: ± 1.5%; ± 1.5 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.4%; ± 20 µL 10000 µL: ± 0.4%; ± 40 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	250 µL: ± 2.5%; ± 6.25 µL 2500 µL: ± 0.3%; ± 7.5 µL 12500 µL: ± 0.3%; ± 37.5 µL 25000 µL: ± 0.3%; ± 75 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL	500 µL: ± 2%; ± 10 µL 5000 µL: ± 0.3%; ± 15 µL 25000 µL: ± 0.3%; ± 75 µL 50000 µL: ± 0.3%; ± 150 µL
体积范围	1 – 100 µL	1 – 100 µL	1 – 100 µL	2 – 200 µL	2 – 200 µL	2 – 200 µL	5 – 500 µL	5 – 500 µL	5 – 500 µL	10 – 1,000 µL	10 – 1,000 µL	10 – 1,000 µL	10 – 1,000 µL	25 – 2,500 µL	25 – 2,500 µL	25 – 2,500 µL	25 – 2,500 µL	50 – 5,000 µL	50 – 5,000 µL	50 – 5,000 µL	50 – 5,000 µL	100 – 10,000 µL	100 – 10,000 µL	100 – 10,000 µL	250 – 25,000 µL	250 – 25,000 µL	250 – 25,000 µL	500 – 50,000 µL	500 – 50,000 µL	500 – 50,000 µL

Multipette M4 / Repeater M4 移液器的性能数据
随机测量误差	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	1 µL: ± 13%; ± 0.13 µL 2 µL: ± 3%; ± 0.06 µL 10 µL: ± 2.4%; ± 0.24 µL 20 µL: ± 2%; ± 0.4 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	2 µL: ± 8%; ± 0.16 µL 4 µL: ± 2%; ± 0.8 µL 20 µL: ± 1.5%; ± 0.3 µL 40 µL: ± 1.5%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	5 µL: ± 8%; ± 0.4 µL 10 µL: ± 1.5%; ± 0.15 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.6%; ± 0.6 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	10 µL: ± 8%; ± 0.8 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.4%; ± 0.8 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	25 µL: ± 8%; ± 2 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.3%; ± 1.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	50 µL: ± 5%; ± 2.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.25%; ± 2.5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	100 µL: ± 4%; ± 4 µL 200 µL: ± 0.6%; ± 1.2 µL 1000 µL: ± 0.4%; ± 4 µL 2000 µL: ± 0.25%; ± 5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.6%; ± 3 µL 2500 µL: ± 0.5%; ± 12.5 µL 5000 µL: ± 0.25%; ± 12.5 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL	500 µL: ± 10%; ± 50 µL 1000 µL: ± 0.5%; ± 5 µL 5000 µL: ± 0.5%; ± 25 µL 10000 µL: ± 0.25%; ± 25 µL
系统测量误差	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	1 µL: ± 8%; ± 0.08 µL 2 µL: ± 1.6%; ± 0.032 µL 10 µL: ± 1.2%; ± 0.12 µL 20 µL: ± 1%; ± 0.2 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	2 µL: ± 6%; ± 0.12 µL 4 µL: ± 1.3%; ± 0.052 µL 20 µL: ± 0.8%; ± 0.16 µL 40 µL: ± 0.8%; ± 0.32 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	5 µL: ± 4%; ± 0.2 µL 10 µL: ± 0.9%; ± 0.09 µL 50 µL: ± 0.8%; ± 0.4 µL 100 µL: ± 0.8%; ± 0.8 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	10 µL: ± 4%; ± 0.4 µL 20 µL: ± 0.9%; ± 0.18 µL 100 µL: ± 0.6%; ± 0.6 µL 200 µL: ± 0.6%; ± 1.2 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	25 µL: ± 4%; ± 1 µL 50 µL: ± 0.8%; ± 0.4 µL 250 µL: ± 0.6%; ± 1.5 µL 500 µL: ± 0.5%; ± 2.5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	50 µL: ± 3%; ± 1.5 µL 100 µL: ± 0.6%; ± 0.6 µL 500 µL: ± 0.5%; ± 2.5 µL 1000 µL: ± 0.5%; ± 5 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	100 µL: ± 3%; ± 3 µL 200 µL: ± 0.5%; ± 1 µL 1000 µL: ± 0.5%; ± 5 µL 2000 µL: ± 0.5%; ± 10 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	250 µL: ± 3%; ± 7.5 µL 500 µL: ± 0.4%; ± 2 µL 2500 µL: ± 0.3%; ± 7.5 µL 5000 µL: ± 0.3%; ± 15 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL	500 µL: ± 6%; ± 30 µL 1000 µL: ± 0.3%; ± 3 µL 5000 µL: ± 0.3%; ± 15 µL 10000 µL: ± 0.3%; ± 30 µL
体积范围	1 – 20 µL	1 – 20 µL	1 – 20 µL	2 – 40 µL	2 – 40 µL	2 – 40 µL	5 – 100 µL	5 – 100 µL	5 – 100 µL	100 – 200 µL	100 – 200 µL	100 – 200 µL	100 – 200 µL	25 – 500 µL	25 – 500 µL	25 – 500 µL	25 – 500 µL	50 – 1,000 µL	50 – 1,000 µL	50 – 1,000 µL	50 – 1,000 µL	100 – 2,000 µL	100 – 2,000 µL	100 – 2,000 µL	250 – 5,000 µL	250 – 5,000 µL	250 – 5,000 µL	500 – 10,000 µL	500 – 10,000 µL	500 – 10,000 µL