Must the lid on epT.I.P.S. Boxes / epT.I.P.S. Boxes 2.0 be opened for autoclaving?

No, the epT.I.P.S. boxes can be autoclaved with the lid closed.

Can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved at 133 °C?

No, the epT.I.P.S. Box / epT.I.P.S. Box 2.0 cannot be autoclaved at 133 °C. We recommend 121 °C.

Are the epT.I.P.S. Box / epT.I.P.S. Box 2.0 and the epT.I.P.S. Racks UV-resistant?

The UV stability of epT.I.P.S. box / epT.I.P.S. Box 2.0 (made of polycarbonate) as well as of the epT.I.P.S. racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light. If a disinfectant is applied prior to UV irradiation make sure to take off the reagent by wiping off using a cloth soaked in water.

Is the epT.I.P.S. Box 2.0 compatible with the Reloads for the forerunner epT.I.P.S. Box?

Yes, the epT.I.P.S. ® Box 2.0 is compatible with all epT.I.P.S. Reloads and all epT.I.P.S. BioBased Reloads.

What is the difference between epT.I.P.S. Box / epT.I.P.S. Box 2.0 and epT.I.P.S. Rack?

The epT.I.P.S. ® Box 2.0 in the new design, equipped with additional benefits, is the successor product of the epT.I.P.S. ® Box used in the market since 2002. Like its predecessor, the epT.I.P.S. Box 2.0 can be autoclaved up to 100 times and can be filled with all epT.I.P.S. Reload variants for pipette tips. Please note: the reload variants for epT.I.P.S. in Biopur ® and PCR clean/Sterile can only be used in the epT.I.P.S. ® Box 2.0. They do not fit into the predecessor epT.I.P.S. Box. The epT.I.P.S. ® Racks on the contrary are disposable and designed for single use only. For detailed information visit: epTIPS brochure

How often can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved?

Both boxes can be autoclaved up to 100 times. Stacking of many boxes should be avoided during this process. Please note that if Reloads are inserted, the tray and tips can only be autoclaved once and that filtered tips cannot be autoclaved.

Do ep Dualfilter T.I.P.S. and/or ep Dualfilter T.I.P.S. SealMax prevent vapour from hazardous liquids to enter the pipette cone? (e.g. fuming acids)

No. The principle of the Dualfilter (in ep Dualfilter T.I.P.S. and ep Dualfilter T.I.P.S. SealMax and their biobased variants) is to protect from aerosols, meaning small liquid droplets in the air and for SealMax also from liquid splashes. Gaseous vapour/fume from liquid samples is not retained by any filter. To protect the lower part of a pipette, it is best to use a lower part made of PTFE (higher chemical resistance, to withstand highly aggressive chemicals (e.g. TFA)). Please note that Eppendorf offers a PTFE lower part for some single-channel Research plus and Reference 2 pipettes. Important to bear in mind when using it: A lower pipette part made of PTFE is not autoclavable as PTFE is not dimensionally stable under heat. Pipette calibration is recommended after replacing the lower part.

What does the engraved text „Rack body made of 100% recycled material” on the epT.I.P.S. ® Rack mean?

Eppendorf has started to produce the Racks in which the pipette tips (epT.I.P.S. ® pipette tips, ep Dualfilter T.I.P.S. ® pipette filter tips, and ep Dualfilter T.I.P.S. ® SealMax ® pipette filter tips) are available from recyclate: All Racks with the engraving are made from 100 % post-consumer recyclate (PCR), which refers to materials that have been collected, recycled, and repurposed. This process helps to reduce waste and the consumption of virgin materials, contributing to a more sustainable and environmentally friendly production cycle.

Do epT.I.P.S. ® Racks with a Rack body made of 100% recycled material have different properties than standard Racks?

No. The material change for the disposable Rack does not affect the purity, sterility, autoclavability or stability of the Racks themselves or the within packed epT.I.P.S. ® pipette tips, ep Dualfilter T.I.P.S. ® pipette filter tips, and ep Dualfilter T.I.P.S. ® SealMax ® pipette filter tips. There is also no change in form, fit or function. As product item numbers remain identical and no changes to the product quality exists, no further actions are required by you, our customer. This is also confirmed by lot-specific and quality certificates.

Can epT.I.P.S. ® Racks with a Rack body made of 100% recycled material be recycled?

Yes. Racks made of 100% recycled Polypropylene can be handled and recycled in the same way as racks made of virgin Polypropylene. Please check with your local biosafety/sustainability/waste management regarding local standards and requirements as the Racks can be contaminated.

What material are epT.I.P.S. ® Racks with a body made of 100% recycled material made of?

The Racks are made of 100% recycled polypropylene. The recycled polypropylene used is post-consumer recyclate (PCR) from the industry and is collected exclusively from contact lens production waste. The so-called "single source" collection of pure polypropylene from the production of medical products ensures that the recyclate retains the purity and integrity required for the production of laboratory consumables. Full traceability of the recyclate and the conformity of the processes to EN 15343:2007 is confirmed by our suppliers.

Are Eppendorf consumables free of RNA?

All consumables certified with "PCR clean" are tested free of human DNA, DNase, RNase and PCR inhibitors. The following applies from our point of view: where no human DNA is detected, there can also be no RNA, which is considerably more unstable.

Are lot specific certificates for the purity grades available in the internet?

Yes, the lot specific purity certificates, so-called Test report, can be downloaded at the certificates homepage .

Are epT.I.P.S. and ep Dualfilter T.I.P.S. resistant to UV-light?

Yes. Under regular applications in a lab, e.g. under UV-light for disinfection of a clean bench, ep T.I.P.S. and ep Dualfilter T.I.P.S. withstand UV-light treatment. This also applies to biobased pipette tips.

Do Eppendorf pipette tips contain heavy metals?

The potential release of trace metal ions from the epTIPS under extreme conditions was measured by an independent and certified laboratory. The certificate that provides exact concentration per metal is provided as a pdf on our certificates homepage .

Which certificates are available for ep Dualfilter T.I.P.S.?

Following certificates are available: Certificate of Quality (quality assurance, trace metals, ep Dualfilter T.I.P.S., HEPA standard, statement on BSE/TSE), Certificate of Purity (PCR clean & sterile or Forensic DNA grade) and a batch-specific sterility certificate for ep Dualfilter T.I.P.S. in PCR clean/sterile and Forensic DNA purity grade is available for download on our website eppendorf.com/certificates .

Can ep Dualfilter TIPS and ep Dualfilter T.I.P.S. SealMax be autoclaved?

No, ep Dualfilter T.I.P.S. and ep Dualfilter T.I.P.S. SealMax cannot be autoclaved.

Is it possible to filter solutions using ep Dualfilter T.I.P.S.?

No, ep Dualfilter T.I.P.S. are not suitable for filtering liquids. They prevent aerosols migrating through the filter.

Are Eppendorf tubes, plates (also LoBind variants), and pipette tips resistant to 100% acetonitrile?

Eppendorf tubes, plates including LoBind, and pipette tips are resistant to 100% acetonitrile only in room temperature conditions. Above 40°C and prolonged exposure (days) may lead to partial damage and is not recommended. For lower acetonitrile concentrations the resistance parameters will be better so prolonged exposure and higher temperatures may be possible. This must be however tested by the customer.

text.skipToContent text.skipToNavigation

CN | CNY

Sorry, we couldn't find anything on our website containing your search term.

ep Dualfilter T.I.P.S.^® 384 - 滤芯吸头

不同长度的Eppendorf滤芯移液器吸头ep Dualfilter T.I.P.S.，垂直放置

不同长度的Eppendorf 滤芯吸嘴 ep Dualfilter T.I.P.S.®，垂直放置

带有滤芯和不带滤芯的吸头比较。只有ep Dualfilter T.I.P.S.可提供对极细小杂质的可靠防护。

产品信息

ep Dualfilter T.I.P.S. 384滤芯移液吸头采用EppendorfSoftAttach^® 技术，经过优化可与Eppendorf Research^® plus 和Xplorer^® plus16 和 24 道移液器，以及20 µL和100 µL Move It^®可调间距移液器结合使用。手动操作384孔板，滤芯吸头松紧度和对齐度极佳，装卸力度极低。

显示更多产品信息

您可以在以下网址找到其他下载资料本页面底部

产品信息

用途

特征

ep Dualfilter T.I.P.S. 384采用SoftAttach^®技术

ep Dualfilter T.I.P.S.384由Eppendorf研发，是首款带有弹性成型凹槽的滤芯吸头，可根据需要尽可能拉伸以实现精准密封，同时大幅降低操作用力。这些吸头专为适配Eppendorf 16道和24道移液器以及20 µL和100 µL Move It^®可调间距移液器而研发，适用于任何涉及384孔板的应用场景。此款移液器与滤芯吸头系统经过优化，既能实现吸头完美贴合密封，又能降低吸头安装和弹出用力。吸头形状细长、同轴度高，能够实现完美对齐，轻松完成全部384孔加样！
产品特征
ep Dualfilter T.I.P.S. 384移液吸头适用于 384 孔板，是Eppendorf优质ep Dualfilter T.I.P.S.系列的最新成员。两者均能为移液器和样本提供极致保护，防止因气溶胶、液滴和飞溅意外造成不易察觉的污染。气溶胶防护吸头专为Eppendorf移液器进行优化，符合EN ISO 8655要求。润湿性和透明度进一步提升，纯度级经过专业认证，能够直观地诠释出我们的产品及生产理念。

ep Dualfilter T.I.P.S. 384共有PCR clean/Sterile两种纯度级，均采用一次性吸头盒包装，盒身由隐形眼镜生产过程中的“单一来源”、型内收集PP回收材料制成。

ep Dualfilter T.I.P.S. 384滤芯吸头是防污染双层滤芯移液吸头产品。双层滤芯采用弹性疏水材料制成，可与吸嘴完美贴合，几乎100 %拦截全部气溶胶和生物分子。过滤效果源于使用清晰可辨、且孔径大小不同的滤芯层。面向样品的滤芯层可过滤水滴、溅射和气溶胶。面向移液器吸嘴的滤芯层作为第二层挡污屏障，能可靠地粘附生物分子。限定的空气通过率确保样品的回收率和便捷地快速移液操作。

吸头间距：ep Dualfilter T.I.P.S. 384与ep Dualfilter T.I.P.S.之间有何区别？

如何快速便捷地完成24、96甚至384微孔板加样？轻量化Eppendorf Research^® plus或电动Xplorer^® plus 8道或12道移液器（吸嘴间距9 mm，适用于96孔板）搭配使用ep Dualfilter T.I.P.S.滤芯吸头，实现高通量精准移液。为满足高通量、小体积移液需求，Eppendorf于近期推出了16道和24道移液器以及精选Move It^®可调间距移液器（吸嘴最小间距4.5 mm）。ep Dualfilter T.I.P.S. 384 专为适配上述移液器而研发，进一步将Eppendorf手动移液范围扩展至384孔板。384孔板手动加样需要一套能够精准、高效处理小尺寸孔井的移液器-吸头系统。

配套使用Eppendorf多道移液器和滤芯吸头，可在加快工作流程的同时保障操作安全

96孔板
Eppendorf手动或电动8道或12道9 mm吸头锥间距移液器能够轻松完成96孔板加样。1,200 µL量程移液器非常适合用于深孔板加样。

选择epT.I.P.S 9 mm吸嘴间距：
https://www.eppendorf.com/dualfilter

384孔板

请选购Eppendorf 16道或24道移液器，或精选Move It^®可调间距移液器，吸嘴间距（最小）4.5 mm，适用于384孔板。一步完成整排或整列加样，同步开启16或24次反应。

选择4.5 mm锥间距epT.I.P.S. 384吸头
https://www.eppendorf.com/eptips384

快速、高效地完成384孔板加样

是否需要为384孔板应用寻找高效、安全的手动移液方法？Eppendorf 16道和24道移液器让384孔板作业更加便捷省力。用一块384孔板取代四块96孔板可以提高移液效率，因为移液步骤会减少50 %。同步启动16孔或24孔反应可确保起始条件一致，避免孔井意外识别错误和重复实验。使用8道或12道移液器进行繁琐的隔孔移液操作早已成为过去！ep Dualfilter T.I.P.S. 384 滤芯吸头专为适配这些微量移液器而研发，旨在确保移液流程安全、免受任何污染。

无疲劳移液——人体工程学设计

为持续保障客户健康，我们于2003年推出了Eppendorf PhysioCare Concept^® 。我们的理念是持续倾听科学家需求，同时不断突破创新。全新Eppendorf系统专为384孔板设计，是成熟理念与创新技术相结合的产物：

备受赞誉的 弹性吸嘴 与SoftEject功能，结合推动实验室符合人体工程学工作条件的创新技术：全新ep Dualfilter T.I.P.S. 384移液吸头采用SoftAttach技术，助力实现无疲劳高效、安全移液

ep Dualfilter T.I.P.S. 384采用SoftAttach技术，进一步减轻吸头安装用力

创新弹性成型凹槽可使吸头根据吸嘴形状充分伸展，从而尽可能减轻吸头安装和弹出用力。

您的获益：
• 吸头可靠贴合并密封
• 吸头安装顺畅、贴合均匀
• 吸头安装用力比8道和12道移液器减少40 %
• 吸头弹出用力降低
• 高同轴度，吸头与吸头锥完美对齐，保障孔板加样和液体转移安全
• 细长形状设计，精准适配384孔板

弹性吸嘴确保吸头可靠贴合、降低吸头安装用力

弹性吸嘴助力您节省时间和精力。采用触觉反馈技术，无需额外施加任何作用力。只需轻轻向下按压直到接收到触觉反馈，便可确保吸头完美、可靠贴合。弹簧既可减轻安装用力，又能确保吸头安装安全、可复现。该设计有助提高用户间操作可复现性，确保不同实验室成员也能获得更加一致的结果。Eppendorf 所有容量不超过1,000 µL的非调节式微量移液器均配备弹簧式吸头锥。

采用SoftEject技术，吸头脱卸用力减少50 %

Eppendorf所有非调节式多道移液器均采用SoftEject创新技术，确保在每次吸头弹出操作时，外层吸头总是先于内部吸头弹出。用户不会注意到这一点，但会将吸头弹出力降低50 %。只需轻按一下弹出按钮，吸头便会自动依次弹出。

ep Dualfilter T.I.P.S. 384移液吸头及包装材料处置

材料回收目前已变得日益重要。以欧洲为例，硬纸板几乎已实现100 %全部回收。ep Dualfilter T.I.P.S 384移液吸头包装由不同材料制成，其中绝大部分为硬纸板。
在Eppendorf耗材、包括ep Dualfilter T.I.P.S. 384移液吸头的包装材料中，运输纸箱至少含有37 %的再生纸板，而折叠纸盒则至少含有60 %的再生纸板。
请收集离心管纸板包装材料，以实际行动支持回收有价值原材料的全球可持续发展倡议。请将收集的包装材料放到所在组织和地区指定的回收容器内。
使用后，吸头本身被定义为可能被污染。这种污染可能导致生物危害、化学危害，甚至是核危害。因此，回收这些吸头具有挑战性。多国法律规定，危险废物必须焚烧处理。不过，对已污染的实验室耗材进行热能回收处理，还可回收过程中产生的能量和热量。
为减少危险塑料废物产生量，应至少准备两个垃圾箱：一个用于放置危险废物，一个用于放置非危险废物。两类废物的具体定义取决于当地法规，需在实验室进行相应宣传/培训。如需了解有关本地废物回收方案的更多信息，请联系本地生物安全官和废物管理机构。
强烈建议选择经认证的本地回收合作伙伴。保持“本地”处置可减少运输带来的影响，建议您联系“认证”机构，因为处理实验室废物时要满足安全性和可持续性要求。