What does the term 2DMix-Control technology describe/stand for?

2DMix-Control technology stands for an orbital circular paths with a diameter of 3 mm and up to 3,000 rpm. 2DMix-Control technology generates excellent mixing performance, even for challenging samples. Detaild information can be found in the brochure "Ther value of Mixing".

Does the MixMate has a momentary shaking function?

Yes, the MixMate has a vortexing function which enables momentary shaking in micro test tubes and in conical tubes. Further information can be found in the Operating Manual.

At which speed is vortexing possible?

Touch Vortex mode: with a fixed frequency at 3,500 rpm Vortexing with free parameters: with a variable frequency from 300 to 2,000 rpm Further inforamtion can be found in the Operating Manual.

MixMate suddenly reduced my mixing rate and "TOO FAST" appeared in the display, why?

The MixMate has an automatic overload protection. The MixMate automatically reduces the mixing frequency to 1,400 rpm and show "TOO FAST" in the display if: a excessivly high speed for the mixing load have been set the mixing load have not been set securely on the plate holder a frequency higher than 2,000 rpm is set for vortexing with free parameters Further information can be found in the Operating Manual.

Can MixMate be operated in a cold room at 4 °C?

Yes, the MixMate can be used in an ambient temperature from 2 – 40 °C and a relative humidity of 10 – 75 %. But a safety hint should be attended: Condensate may form in the device when it has been moved from a cool environment to a warmer environment. After installing the device, wait for at least 3 hours. Only then connect the device to the mains/power line. Further information can be found in the Operating Manual.

Is it possible to switch off the acoustic signal or at least turn down the volume of the MixMate?

Yes, the signal tones can be switched off in the menu of the devices under M-1 VOL. But all signal tones instead of alarm tones will be switched off in that case. Further information can be found in the Operating Manual.

Despite using the soft keys, lid wetting has occurred, why?

Could depends on one or more of the following factors: - tube or plate size - filling volume - properties of the sample material (e.g., buffer composition, viscosity, density, etc.) The parameters of the program keys do not cover all known or possible tube or plate geometries as well as sample properties. For some applications, it may be possible to optimize these parameters. For example, the mixing frequency can be too high and cause cover wetting. In such case, the present parameters can adapt but unfortunately not safed at the program key. Further information can be found in the Operating Manual.

Which norms and standards are fulfilled by MixMate?

The MixMate fulfills the requirements of directives and standards listed (retrieved 2016): 2014/35/EU: EN 61010-1 EN 61010-2-051 UL 61010-1 CSA C22.2 No. 61010-1 2014/30/EU: EN 55011 EN 61326-1 2011/65/EU: EN 50581

How to perform the cleaning and disinfection of MixMate, ThermoMixer F, ThermoMixer C, ThermoStat C, SmartBlocks, SmartExtender and ThermoTop?

Switch off the device, disconnect the mains/power plug and make sure that no liquid can get into the inside of the housing. When cleaning has been completed, the device should only be connected when it is fully dry on the inside and on the outside. Use lint-free cloth and soft bottle brush or cotton swabs for SmartBlocks and SmartExtender. Do not use any aggressive chemicals on the device or its accessories such as strong and weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or phenol. If the device is contaminated with aggressive chemicals, clean it immediately using a mild cleaning agent and wipe it off with dist. water afterwards. Recommended cleaning agents: mild, soap-based lab cleaner dist. water Recommended disinfectants: ethanol (70%) isopropanol (70%) Please follow the detailed safety instructions in the Operating Manual..

请联系您当地的 Eppendorf 服务团队。您可以在我们的主页或资讯材料中找到联系信息。

IQ 或 OQ 是什么？有什么用？

安装和操作验证；IQ 记录设备已正确交付和安装。 OQ 检查设备是否正常运行。 IQ/OQ 确保设备满足您的质量管理要求，确保设备正常运行且符合制造商指标。

温度验证包括什么内容，需要多长时间进行一次？

为了确保您的 ThermoMixer 恒温混匀仪提供可重复且正确的结果，强烈建议（如果需要）进行温度验证和调整。温度验证是一种非常准确和精确的方法，符合国家和国际标准规定的记录和检测方面的所有实验室要求。

如何验证温度精确度？

可以通过调整每个 SmartBlock 可更换式加热模块确保最高的温度精确度。 Eppendorf 单通道温度验证系统用于检查加热模块的温度精确度。结合 Eppendorf ThermoMixer 恒温混匀仪温度传感器，可以精确测量加热模块上的温度。您可以在相应手册中找到更多信息。

如何清洁设备，可以使用哪些清洁剂和消毒剂对 ThermoMixer C、ThermoMixer F 和 ThermoStat C 进行清洁和消毒？

关掉设备，断开电源插头，确保没有液体进入外壳内部。清洁完成后，只有当设备内外侧完全干燥时，才能连接设备。不要在设备或其配件上使用任何腐蚀性的化学物质，如强弱碱、强酸、丙酮、甲醛、卤化烃或苯酚。如果设备受到腐蚀性化学物质污染，请使用温和的清洁剂立即清洗。请使用无绒布、温和的肥皂实验室清洁剂和蒸馏水。定期清洁外壳和加热模块。更多信息请参阅您的操作手册 - 维护章节。

我想提高我的技能，你们能够提供哪些类型的培训或在线培训？

请访问 Eppendorf 网页关于 Eppendorf 培训中心的信息或联系您当地的 Eppendorf 客服，以获取更多信息和报价。

text.skipToContent text.skipToNavigation

CN | CNY

Sorry, we couldn't find anything on our website containing your search term.

MixMate^®

Q: 我该联系谁？

请联系您当地的 Eppendorf 服务团队。 您可以在我们的主页或资讯材料中找到联系信息。

Eppendorf MixMate mixer device with red PCR 384-well plate

Eppendorf MixMate Tube holder for 0.5 mL lab vessels for sufficient mixing

Eppendorf MixMate Tube holder PCR 96 for mixing PCR plates

Eppendorf MixMate Tube holder for 1.5/2.0 mL lab vessels

Eppendorf MixMate Tube Holder for 5/15 mL lab vessels, filled with 5 mL tubes

Eppendorf MixMate Tube Holder for 5/15 mL lab vessels, filled with 15 mL conical tubes

Eppendorf MixMate Tube Holder for mixing 25/ 50 mL lab tubes

Scientist puts plate on Eppendorf MixMate to mix samples

Lab scientist changes settings of Eppendorf MixMate instrument

Eppendorf MixMate with PCR 96 tubeholder

Eppendorf Mixmate with semi-skirted PCR plate

Eppendorf MixMate mixing instrument to mix or vortex lab samples

Eppendorf mixing of small volume samples in the lab

产品信息

需要直线混合？ 3 合 1 模块：混匀工作板和微量管，并具有涡旋振荡混匀功能。这款高速混匀设备确保不同试管或板内样品的充分混匀。优越的 ^2DMix-Control 混匀操控技术进行可控的混匀，防止溅射。

显示更多产品信息

了解更多有关Eppendorf产品的可持续特性，包括如何辨别可持续混匀仪

索取演示版

您可以在以下网址找到其他下载资料本页面底部

产品信息

技术数据

用途

特征

需要直线混合？ 在几秒钟内充分和可靠地混匀您的样品。无论是微孔板（96 或 384 孔）还是样品管，都将将以最佳方式处理您的样品。集成人体工程学涡旋功能，MixMate 是您的完美实验室助手。具有 2 秒振荡延迟功能，可进行连续混匀，无需重新启动。

经常无法获得满意的混匀结果？

可靠的样品混匀，其意义已远远超出混匀本身，尤其是微升级样品。数十年来，我们一直致力于为客户提供混匀设备，并探索出一条能够进一步提升微升级样品可靠混匀性能的方法：

^2DMix–Control

卓越的 ^2DMix–Control 技术，在受控和循环运动下混合液体。轨道偏心距 3 mm，最高转速 3,000 rpm：可以获得绝佳混匀性能，即使是棘手样品也可轻松处理。 MixMate 混匀小精灵具备足够的混匀能力，来应对各种高挑战性的混匀实验。无论样品管形状或样品属性如何，大多数样品都能在 1 分钟内有效地混匀。

需要小体积混匀？

使用 MixMate 进行受控混合的缩时摄影。卓越的 ^2DMix‐Control 技术，在极度受控和循环运动下混合液体。不存在溅液，从而可以在混合过程中避免罐盖潮湿或交叉污染。

手头有不同样品?

MixMate提供足够的混合动力以应对挑战性的混合任务。无论样品管形状或样品属性如何，大多数样品都能在 1 分钟内有效地混匀。更多信息见应用文献第130期。

需要使用不同尺寸的样品管？

MixMate 混匀小精灵可以配备不同的管架，灵活用于常见样品管和工作板。
通过快速更换功能可以快速方便地更换管架。

早已厌倦纸质记录？

eLabJournal Electronic Lab Notebook 为记录和追踪研究数据（诸如 MixMate 相关工作流程）提供了直观且灵活的解决方案。提高记录、组织、搜索和归档所收集数据的效率。通过免费的eLabJournal附加组件，您可将eLabJournal的功能扩展到一个完全集成的Laboratory Information Management System。

免费试用 30 天！
访问www.eLabJournal.com

阅读更少

规格	MixMate^®

样品容量	最大 96 × 0.2 mL PCR管, 24 × 0.5 mL 离心管, 24 × 1.5 mL 离心管, 24 × 2.0 mL 离心管, 8 × 5/15 mL, 4 × 25/50 mL, 1 × DWP/MTP 或 1 × PCR板
产品类型	Mixer混匀仪
定时器	可连续运行 15 秒 – 99.3 小时
噪音水平	<50 dB(A)
电源	230 V, 50 – 60 Hz
最大能耗	40 W
尺寸（长x宽x高）	17.0 × 23.0 × 13.0 cm / 6.7 × 9.1 × 5.1 in
产品重量	4.2 kg / 9.2 lb
最大速度	3,000 rpm
混匀频率	300 – 3,000 rpm
混合和漩涡半径	1.5 mm
接触回旋频率	3500 rpm
振幅	3 mm