-
- Tutte le centrifughe
- Centrifughe da banco
- Centrifughe da pavimento
- Centrifughe refrigerate
- Microcentrifughe
- Centrifughe multiuso
- Centrifughe ad alta velocità
- Ultracentrifughe
- Concentratore
- Prodotti IVD
- High-Speed and Ultracentrifuge Consumables
- Provette per centrifughe
- Piastre per centrifughe
- Gestione degli apparecchi
- Gestione di campioni e informazioni
-
- Tutte le pipette, i dispenser e i sistemi automatizzati per la manipolazione dei liquidi
- Pipette meccaniche
- Pipette elettroniche
- Pipette multicanale
- Pipette e dispenser a spostamento positivo
- Puntali per pipette
- Dispenser per flaconi
- Controller per pipette
- Accessori per dispenser e pipette
- Pipettaggio automatico
- Consumabili per l'automazione
- Accessori per l'automazione
- Servizi di assistenza per dispenser e pipette
Leachables: Minimizing the Influence of Plastic Consumables in the Lab
Lab Academy
- Settore farmaceutico
- Natura
- Pipettaggio e dosaggio
- Qualità
- Contaminazione
- Puntali per pipette
- Recipienti
- Saggio
Many life sciences laboratories still underestimate the influence of substances which may leach from plastic consumables. These "leachables" are capable of interfering with experiments to a large degree. With our long-standing expertise in manufacturing high quality plastic consumables, the entire process chain receives due consideration during development and production of epT.I.P.S.® pipette tips. This translates to: Only carefully selected raw materials are used, which were not recycled. During production, neither plasticizers, nor biocides or mold release agents are used, since especially these additives have been linked to leaching effects which may negatively influence your experiments.
Meno informazioni
Videos not loading, because cookies have been rejected. Change your
Additives easing production process (plasticizers, biocides, slip agents) are known to disturb biological assays. Thus their use must be avoided. Additives needed for product characteristics (e.g. not becoming brittle) are decreased to a minimum. Which substances may leach out of the plastic and if these are critical for assays is described by following graphic.
Meno informazioni
Due to the very short period of contact, the time window for transmission of leaching substances is very short. Recent scientific literature discussed that there may be effects after increasing the number of pipetting steps indicating a cumulative effect. For this reason a MEA test (Mouse-Embryo-Assay) performed by an exernal accredited and FDA-registered laboratoy, can show whether cell embryos are influenced by molecules from e.g. additives leaching out of the plastic of tips. Mouse-Embryo-Assays are sensitive to substances disturbing growth. Thus Mouse-Embryo-Assays (MEA) are a good validation of influence by leachables. Pipette tips have shown not to influence the growth of mouse embroys.
Meno informazioni
Proof of compliance with requirements of standards, guidelines and regulations that apply to biological, diagnostic research and industrial laboratories can be provided with product specific certificates for absence of surface active additives.
Meno informazioni