text.skipToContent text.skipToNavigation
press_release_eppendorf_bioprocess_autosampler

Eppendorf integrates Bioprocess Autosampler with NOVA BioProfile® FLEX2 analyzer to enable automated feedback control

news

Eppendorf and Nova Biomedical® collaborate to integrate the Eppendorf Bioprocess Autosampler with the BioProfile FLEX2 cell culture analyzer. The integration enables automated at-line analysis of critical process parameters in upstream bioprocesses and supports feedback control based on the results.

Eppendorf has expanded the capabilities of its Bioprocess Autosampler by integrating it with the BioProfile® FLEX2 cell-culture analyzer from Nova Biomedical. The combined solution automates sample collection from Eppendorf small- and bench-scale bioreactors, their at-line analysis, and feedback control. This supports timely, data-driven process adjustments during the run.

“Users can now take a significant step toward fully automated bioprocessing,” explains Dr. Sarah Wirth, Innovation Manager at the Eppendorf Bioprocess Center. “They can respond promptly to changes in the process and address deviations as they arise, rather than detecting them only after the run has been completed.”

“The combination of Eppendorf's flexible bench-scale bioreactor platforms and Nova Biomedical's BioProfile FLEX2 enables bioprocess teams to monitor critical process parameters with minimal manual intervention,” confirms Royston Bulman, Senior Manager, International Applications at Nova Biomedical.

Sampling, analysis, and process control in one workflow

All workflow steps are managed in DASware® control bioprocess control software. These include scheduling sampling time points, defining the parameters for each sample, coordinating analyzer availability, and using measurement data for process control.

“We integrate our bioprocess solution with the analyzer using our software, providing users with a simple, comprehensive solution,” says Sarah. “Process data will instantly be available through BioNsight® cloud for analysis, collaboration and informed decision-making. The result is greater automation, improved process consistency and faster development across a broad range of bioprocessing applications," adds Royston.

At the scheduled time, the Bioprocess Autosampler collects a sample from the selected vessel and transfers it directly to the BioProfile® FLEX2 for analysis. The results are then made available in DASware control software for process monitoring and used as inputs to configured feedback loops, enabling automated process control. The data can be further transferred to BioNsight cloud software for remote monitoring and data analysis across runs, sites, and scales.

The workflow is designed for cell-culture applications. Parameters may include metabolites, osmolality, pH, pCO₂, pO₂, cell density, and viability.

Bioprocess Autosampler capabilities

The Bioprocess Autosampler supports automated sampling, sample transfer to a sample storage or an external analyzer, bolus addition, and inoculation. Depending on the controller used, it can handle up to 16 glass or single-use bioreactors with working volumes from 250 mL to 10 L. The system is compatible with DASbox® Mini Bioreactor System, DASGIP® Parallel Bioreactor System, SciVario® twin, BioFlo® 320, and BioFlo 320 plus controllers. Aseptic operation is possible without a clean bench. The system can be installed with new equipment or retrofitted to existing systems.

For more information about the Bioprocess Autosampler and its integration with the BioProfile® FLEX2
https://eppendorf.group/bioprocess-autosampler-analyzer-integration .

Warto przeczytać

Press Release
PDF 0,25 MB
Press Image
JPG 0,42 MB
Press Image
JPG 0,18 MB