Are the epT.I.P.S. Box / epT.I.P.S. Box 2.0 and the epT.I.P.S. Racks UV-resistant?

The UV stability of epT.I.P.S. box / epT.I.P.S. Box 2.0 (made of polycarbonate) as well as of the epT.I.P.S. racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light. If a disinfectant is applied prior to UV irradiation make sure to take off the reagent by wiping off using a cloth soaked in water.

Are Eppendorf products free of RNA?

All products certified with "PCR clean" are tested free of human DNA, DNase, RNase and PCR inhibitors. The following applies from our point of view: Where no human DNA is detected, there can also be no RNA, which is considerably more unstable.

What is the meaning of the PCR Clean seal?

For molecular-biological requirements Eppendorf offers a new standard for uniform purity specifications. All consumables marked with the "Certified PCR Clean” label are guaranteed free of human DNA, DNase, RNase and PCR inhibitors.

What is the shelf life of Eppendorf Biopur products?

If the Biopur products are stored according to the information in the instruction manual they have a shelf life of 5 years. The minimum expiry date is printed on the label of the box.

Why are there double labels on the folding boxes, as "PCR clean" + "Sterile" or "PCR clean" + "Protein-free"?

Due to the modularization of purity grades, some products are labeled with more than one purity grade symbol. For example, the epDualfilter T.I.P.S. has the double seal "PCR clean "+ "Sterile" and the UVette the double seal "PCR clean" + "Protein-free" on the packing. The certification remains unaffected by the modularization.

Are lot specific certificates for the purity grades available in the internet?

Yes, the lot specific purity certificates, so-called Test report, can be downloaded at the certificates homepage .

Can products of the previous and new modular purity grades (with new seals) be used simultaneously in one application?

Yes, if no batch attachment is required for the application, products of the old and new modular purity grades can be used, as their specifications are the same.

What are the reasons for using single-use plasticware in the laboratory?

Contamination and cross-over can only be avoided by using single-use plastic items. In addition, there is no annoying and time-consuming cleaning of glassware.

How are Eppendorf pipette tips tinted?

Organic, heavy-metal-free dyes (PP granulate) are used to tint the pipette tips.

Is a reload available for the 5 mL epTIPS Box?

No, the 5 mL epTIPS Box will be filled with epTIPS Standard.

Do Eppendorf pipette tips contain heavy metals?

The potential release of trace metal ions from the epTIPS under extreme conditions was measured by an independent and certified laboratory. The certificate that provides exact concentration per metal is provided as a pdf on our certificates homepage .

Are Eppendorf pipette tips free of silicone / silicone oil?

Neither silicone nor silicone oil is added during the production process of epT.I.P.S. pipette tips.

Up to which temperature can solutions be dispensed with epTIPS?

The epTIPS made of PP are suitable for liquids with a temperature of max. 90°C. Please take into account that the pipetting error rises due to evaporation into and warming of the air cushion.

To destroy prions, an autoclave step at 136 °C and 3 atm must be carried out. Can the epTIPS Box (or epTIPS Rack Biopur) withstand this?

No, the epTIPS Box or the epTIPS Rack Biopur cannot be autoclaved at 136 °C.

Must the lid on epT.I.P.S. Boxes / epT.I.P.S. Boxes 2.0 be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

Can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved at 133 °C?

No, the epT.I.P.S. Box / epT.I.P.S. Box 2.0 cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epT.I.P.S. Box 2.0 compatible with the Reloads for the forerunner epT.I.P.S. Box?

Yes, the epT.I.P.S. ® Box 2.0 is compatible with all epT.I.P.S. Reloads and all epT.I.P.S. BioBased Reloads.

What is the difference between epT.I.P.S. Box / epT.I.P.S. Box 2.0 and epT.I.P.S. Rack?

The epT.I.P.S. ® Box 2.0 in the new design, equipped with additional benefits, is the successor product of the epT.I.P.S. ® Box used in the market since 2002. Like its predecessor, the epT.I.P.S. Box 2.0 can be autoclaved up to 100 times and can be filled with all epT.I.P.S. Reload variants for pipette tips. Please note: the reload variants for epT.I.P.S. in Biopur ® and PCR clean/Sterile can only be used in the epT.I.P.S. ® Box 2.0. They do not fit into the predecessor epT.I.P.S. Box. The epT.I.P.S. ® Racks on the contrary are disposable and designed for single use only. For detailed information visit: epTIPS brochure

How often can the epT.I.P.S. Box / epT.I.P.S. Box 2.0 be autoclaved?

Both boxes can be autoclaved up to 100 times. Stacking of many boxes should be avoided during this process. Please note that if Reloads are inserted, the tray and tips can only be autoclaved once and that filtered tips cannot be autoclaved.

What does the engraved text „Rack body made of 100% recycled material” on the epT.I.P.S. ® Rack mean?

Eppendorf has started to produce the Racks in which the pipette tips (epT.I.P.S. ® pipette tips, ep Dualfilter T.I.P.S. ® pipette filter tips, and ep Dualfilter T.I.P.S. ® SealMax ® pipette filter tips) are available from recyclate: All Racks with the engraving are made from 100 % post-consumer recyclate (PCR), which refers to materials that have been collected, recycled, and repurposed. This process helps to reduce waste and the consumption of virgin materials, contributing to a more sustainable and environmentally friendly production cycle.

Do epT.I.P.S. ® Racks with a Rack body made of 100% recycled material have different properties than standard Racks?

No. The material change for the disposable Rack does not affect the purity, sterility, autoclavability or stability of the Racks themselves or the within packed epT.I.P.S. ® pipette tips, ep Dualfilter T.I.P.S. ® pipette filter tips, and ep Dualfilter T.I.P.S. ® SealMax ® pipette filter tips. There is also no change in form, fit or function. As product item numbers remain identical and no changes to the product quality exists, no further actions are required by you, our customer. This is also confirmed by lot-specific and quality certificates.

Can epT.I.P.S. ® Racks with a Rack body made of 100% recycled material be recycled?

Yes. Racks made of 100% recycled Polypropylene can be handled and recycled in the same way as racks made of virgin Polypropylene. Please check with your local biosafety/sustainability/waste management regarding local standards and requirements as the Racks can be contaminated.

What material are epT.I.P.S. ® Racks with a body made of 100% recycled material made of?

The Racks are made of 100% recycled polypropylene. The recycled polypropylene used is post-consumer recyclate (PCR) from the industry and is collected exclusively from contact lens production waste. The so-called "single source" collection of pure polypropylene from the production of medical products ensures that the recyclate retains the purity and integrity required for the production of laboratory consumables. Full traceability of the recyclate and the conformity of the processes to EN 15343:2007 is confirmed by our suppliers.

What are the dimensions of the epTIPS standard?

0,1-10 µL: length: 34 mm, diameter work cone: 6 mm, diameter opening: 0,35 mm 0,1-20 µL: length: 40,5 mm, diameter work cone: 6 mm, diameter opening: 0,36 mm 0,5-20 µL: length: 45,7 mm, diameter work cone: 6 mm, diameter opening: 0,37 mm 2-200 µL: length: 52,7 mm, diameter work cone: 7 mm, diameter Öffnung: 0,52 mm 20-300 µL: length: 55 mm, diameter work cone: 7 mm, diameter opening: 0,6 mm 100-1000 µL: length: 70,72 mm, diameter work cone: 8,8 mm, diameter opening: 0,83 mm 1250 µL: length: 75,5 mm, diameter work cone: 8,8 mm, diameter opening: 1,0 mm 2,5 mL: length: 115 mm, diameter work cone: 12 mm, diameter opening: 1,32 mm 5 mL: length: 120,3 mm, diameter work cone: 15,5 mm, diameter opening: 1,65 mm

Are epT.I.P.S. and ep Dualfitler T.I.P.S. resistent to UV-light?

Yes. Under regular applications in a lab, e.g. under UV-light for disinfection of a clean bench, ep T.I.P.S. and ep Dualfilter T.I.P.S. withstand UV-light treatment. This also applies to biobased pipette tips.

If epT.I.P.S. Reloads are to be autoclaved, does the film- and plastic-packaging need to be removed?

Yes, under no circumstances should the film be autoclaved alongside the tips. Please note that stacked reloads can only be autoclaved one time, when inserted individually into the epT.I.P.S. Box or epT.I.P.S. ® Box 2.0. Reloads for pipette (filter) tips in Biopur ® or PCR clean/Sterile cannot be autoclaved.

How often can the epTIPS Boxes be autoclaved?

The box can be autoclaved up to 100 times, the reloads up to 5 times.

Must the lid on epTIPS Boxes be opened for autoclaving?

No, the boxes can be autoclaved with the lid closed.

Can the epTIPS Boxes be autoclaved at 133 °C?

No, the epTIPS Box cannot be autoclaved at 133 °C. We recommend 121 °C.

Is the epTIPS Box or are the epTIPS Racks UV-resistant?

The UV stability of epTIPS boxes (made of polycarbonate) and epTIPS racks (made of polypropylene) were tested intensively during development. Boxes and racks were exposed to 254 nm UV light (1 J/cm2) for 16.7 hours. After 10 cycles (167 hours), no signs of adverse effects were detectable. Because the energy of the lamp used is considerably higher than that of a lamp used in a sterile bench, it can be assumed that both boxes can be exposed to UV radiation for at least 300 to 600 hours in a sterile bench without problems. Polypropylene used for epTIPS Racks is three times more resistant against UV radiation than polycarbonate allowing even longer exposure to UV light.

text.skipToContent text.skipToNavigation

KR | KRW

Sorry, we couldn't find anything on our website containing your search term.

epT.I.P.S.^® - 피펫 팁

Eppendorf epT.I.P.S.® – 0.1 µL ~ 10 mL의 크기로 제공

Eppendorf 피펫과 완벽하게 호환되는 Eppendorf epT.I.P.S.®

Deepwell plate를 채우는 데 사용 중인 epT.I.P.S.® L elongated 피펫 팁

epT.I.P.S.® 매크로 용량 팁이 있어 15mL 원심분리 튜브 또는 플라스크 등의 하단에 쉽게 접근할 수 있음

Eppendorf epT.I.P.S.® pipette tips Box 2.0

랙으로 제공되는 사전 멸균 epT.I.P.S.® 및 ep Dualfilter T.I.P.S.® 피펫 팁

제품 정보

epT.I.P.S. 피펫 팁은 Eppendorf 피펫과 완벽하게 호환됩니다! 인체공학적으로 설계된 콘 형태로 완전하게 밀봉되고 장착과 배출에 필요한 힘이 최소화됩니다. 이 피펫 팁은 EN ISO 8655 요건을 충족하고 다른 제조사의 피펫에도 사용할 수 있습니다.

제품 정보 자세히 표시

상자 및 세트와 관련된 중요한 고객 정보: 제품 번호 변경

이 페이지 하단에서 추가 다운로드 자료를찾을 수 있습니다.

제품 정보

애플리케이션

특징

Eppendorf 피펫을 위한 완벽한 선택: epT.I.P.S.로 믿을 수 있는 피펫팅 시스템 구축
epT.I.P.S. (Eppendorf "Totally Integrated Pipetting System") 피펫 팁으로 일상적인 작업을 더욱 쉽고 즐겁게 수행할 수 있습니다. 이 피펫 팁은 엄격한 순도 기준에 따라 최고급 원료를 사용해 제조되어 모든 시료 요구사항을 충족합니다. 팁을 부착하고 배출하는 데 필요한 힘을 최소화하고 완벽한 밀봉을 보장하는 epT.I.P.S.는 Eppendorf 피펫과 완벽히 호환되어 최대의 정밀성, 정확성 및 재현성을 보장하는 통합 피펫팅 시스템을 구현할 수 있습니다.
이상적인 습윤성과 최적의 투명성을 갖춘 Eppendorf 피펫 팁은 고순도 플라스틱 소재로만 제조됩니다. 또한 epT.I.P.S. 피펫 팁은 Eppendorf Quality, PCR clean, Sterile, Eppendorf Biopur^®의 인증된 Purity Grade로 제공됩니다. 실험에서 항상 재현 가능한 결과를 얻기 위해 필요한 피펫 팁 품질과 순도를 선택할 수 있습니다. 또한 Eppendorf 팁에는 범용 노즈콘 디자인을 적용해 다른 제조사의 피펫에도 사용할 수 있습니다.

Eppendorf Biopur^® 피펫 팁은 개별 포장되거나 일회용 랙으로 제공되고, 랙 본체는 콘택트 렌즈 제조 시 발생하는 "싱글 소스" 내부 수거 재활용 폴리프로필렌으로 제조됩니다. epT.I.P.S.^® BioBased Biopur^® 피펫 팁은 epT.I.P.S.^® Box 2.0에 끼울 수 있도록 멸균 Reloads로 제공됩니다. PCR clean 피펫 팁은 비멸균 Reloads로 제공됩니다. Eppendorf Quality 피펫 팁은 Reloads에 미리 조립되어 제공되거나 백에 벌크로 제공됩니다. 모든 Reloads 버전은 해당 epT.I.P.S. Box 2.0에 손쉽게 끼울 수 있습니다.

정품 Eppendorf 피펫 팁은 어떻게 식별하나요?
모든 Eppendorf 팁에는 팁 크라운의 가장자리에 물방울 모양의 '링'이 있습니다.

안정적인 샘플링을 위해 길어진 길이: epT.I.P.S. L 피펫 팁
긴 epT.I.P.S. L 피펫 팁을 사용하면 코니컬 튜브, 높은 시약병, 좁고 깊은 용기, 세포 배양 플라스크 또는 딥웰 플레이트에서 시료를 안정적으로 피펫팅할 수 있습니다. 이 피펫 팁은 길고 슬림한 디자인 덕분에 튜브나 웰의 측면에 닿을 위험을 최소화하면서 시료에 자유롭게 접근할 수 있습니다. 또한 피펫팅 중에 교차 오염을 최소화할 수 있습니다. epT.I.P.S. L는 0.5 – 20 µL, 50 – 1,250 µL, 0.2 – 5 mL, 0.5 – 10 mL의 용량으로 제공됩니다.

epT.I.P.S. 피펫 팁 및 포장재 폐기

자재의 재활용은 점점 더 중요해지고 있습니다. 예를 들어, 유럽에서 판지는 이미 100 % 가까이 재활용되고 있습니다. epT.I.P.S. 피펫 팁의 포장재는 다양한 재료로 만들어지지만, 대부분은 판지입니다.
Eppendorf 소모품과 epT.I.P.S. 피펫 팁은 37 % 이상 재활용된 판지로 만들어진 배송 상자와 60 % 이상 재활용된 판지로 만들어진 제품 상자를 사용해 배송됩니다.
튜브의 판지 포장재를 수거하여 귀중한 원자재를 재활용하는 Eppendorf의 글로벌 지속 가능성 프로그램을 지원해주시기 바랍니다. 해당 조직과 지역에 있는 전용 수거 용기에 포장재를 폐기해 주십시오. epT.I.P.S. Standard용 폴리에틸렌(PE) 소재로 만든 포장 호일의 경우 PE 자재를 재활용할 수 있는 재활용 협력업체를 선정할 것을 권장합니다. 시설 또는 지역 폐기물 관리 업체에 연락해 가능한 재활용 옵션을 알아보시기 바랍니다.
사용한 팁은 잠재적으로 오염된 것으로 간주됩니다. 이러한 오염은 생물학적 위험, 화학적 위험 또는 방사능 위험을 초래할 수 있습니다. 따라서 이러한 팁의 재활용은 어려울 수 있습니다. 많은 국가에서 위험 폐기물은 법적 규정에 따라 소각되어야 합니다. 그러나 오염된 실험실 소모품의 열적 재활용을 통해 에너지와 열을 회수할 수 있습니다.
위험 플라스틱 폐기물의 양을 줄이려면 최소 2개의 폐기물 용기를 사용해야 합니다. 하나는 위험 폐기물용이고 다른 하나는 비위험 폐기물용입니다. 이 두 그룹의 정의는 지역 규정에 따라 다르기 때문에 이에 따라 적절히 실험실에 전달하고 교육해야 합니다. 지역 폐기물 재활용 옵션에 대한 자세한 정보는 지역 생물 안전 담당관과 지역 폐기물 관리 부서로 문의하시기 바랍니다.
Eppendorf는 인증된 지역 재활용 협력업체를 선정할 것을 권장합니다. "지역" 협력업체를 이용하면 운송의 영향을 줄일 수 있고, "인증된" 협력업체를 이용하면 실험실 폐기물을 안전하고 지속 가능하게 처리할 수 있습니다.