JP | JPY
Eppendorf ThermoMixer® C
ThermoMixer_C ACT SmartBlock 1.5mL
Eppendorf ThermoMixer C with SmartBlock 1.5 mL
Eppendorf ThermoMixer® C - 実験室のすべての混合タスクを 1 台の装置で実行できます。
Discover our most versatile solution for mixing, heating, and cooling of samples - Selection of compatible SmartBlocks
長年にわたる簡単で信頼性の高い操作
Robust design and LCD display – proven and tested since years in thousands of labs globally
Mix image PCR 96
2DMix-Control: Up to 3,000 rpm at a wide 3 mm orbit – even for MTP or 384-well PCR plates
Eppendorf SmartBlock DWP 500
Dedicated form-fitting SmartBlocks for deep-well (96 well, 500 or 1000 µl) and PCR plates (96/384 well) ensure fast temperature transfer from the block to your samples
Eppendorf ThermoMixer C with ThemoTop
ThermoTopを装置に設置すると、直ちに加熱を開始します。温度はサンプルに悪影響を与えないように、最適にテスト温度に適合します。凝縮水の水滴が発生することはありません。
Thermomixer C with Call-Outs
Optional SmartExtender: Up to 12x1.5 mL tubes, compatible with all SmartBlocks - for example for parallel enzymatic reactions.
オプションのSmartBlock cryo thawによる標準化された無水細胞解凍
Contamination protection, standardization, and versatilty needed? Convert your Eppendorf ThermoMixer® C (used with Eppendorf CryoStorage Vials here) into a powerful alternative to hand-/water bath warming or dedicated cell-thawing devices
Sample transfer by Transfer Rack
Optional Eppendorf Transfer Rack - For Eppendorf SmartBlocks 0.5, 1.5, and 2.0 mL
エッペンドルフSmartBlock Removal 1
ステップ 1： Eppendorf QuickReleaseメカニズムなので迅速かつ容易なブロック交換が可能です。ブロックの前部のレバーを押すだけで、数秒でブロックを取り外せます。ツールは必要ありません。
エッペンドルフSmartBlock Removal（ステップ2）
ステップ 2： Eppendorf QuickReleaseメカニズムなので迅速かつ容易なブロック交換が可能です。ブロックの前部のレバーを押すだけで、数秒でブロックを取り外せます。ツールは必要ありません。
エッペンドルフSmartBlock Removal（ステップ3）
ステップ 3： Eppendorf QuickReleaseメカニズムなので迅速かつ容易なブロック交換が可能です。ブロックの前部のレバーを押すだけで、数秒でブロックを取り外せます。ツールは必要ありません。
ACT label of sustainability certification for ThermoMixer C
Independent sustainability certification needed? The ACT label of My Green Lab for Eppendorf ThermoMixer C
ThermoMixer_C SmartBlock_15mL angle view
Eppendorf ThermoMixer with SmartBlock 15 mL: Incubation and mixing with 15 mL conical tubes (up to 8 vessels)
ThermoStat C SmartBlock: PCR 96, total angle
Eppendorf ThermoMixer with SmartBlock PCR 96: Incubation and mixing for 96 well PCR plates (skirted, semi-skirted, and non-skirted)
Thermomixer C Smartblock_5.0mL_total_angle
Eppendorf ThermoMixer C with SmartBlock 5 mL: Incubation and mixing for 5 mL vessels
ThermoMixer_C SmartBlock_plate_total_angle
Eppendorf ThermoMixer C with SmartBlock Plates
ThermoMixer C lid, plate
Eppendorf Thermomixer C with SmartBlock and lid: The lid reduces loss of temperature as well as risk of contamination when using open vessels.
ThermoMixer C Scientist in lab with ThermoTop
Trouble with condensation? The Eppendorf ThermoTop heats from the top to reduce potential condensation within the vessel lids
Eppendorf ThermoMixer® - Change comes quickly, take advantage of our versatility
You need everything? The Eppendorf ThermoMixer C combines excellent mixing performance with excellent temperature control to ensure complete, dependable and reproducible test results. Improve your assay results by mixing and incubating samples at the same time. The Eppendorf ThermoMixer C convinces users with its quick and easy-to-exchange SmartBlocks for all common lab vessels, new and improved program functions, and high level of stability for every mixing frequency. There is almost no limit to the variety of applications waiting for you!
製品情報
サンプルのミキシング、加熱、冷却のための、最も汎用性の高いソ解決法をご覧ください。 アクセサリーには、サンプルの迅速なテンパリングを実現するフォームフィットDWPブロック、制御された水分を含まない細胞解凍ブロック、容器蓋内の結露を防ぐヒートリッド（ThermoTop®）、メインブロックとは異なる温度で1.5mlチューブをインキュベートできるSmartExtenderなど、幅広いSmartBlockをご用意しています。
Thermo-Mixer-C-SB-1.5ml
追加でダウンロードできる材料がありますこのページの最後に
製品 (1)
Services (7)
アクセサリー (20)
VisioNize (2)
|
お客様のショッピングカートに追加されました。
製品情報
テクニカルデータ
アプリケーション
特徴
製品情報
なんでも必要ですか? Eppendorf ThermoMixer Cは、完全で信頼性のある再現可能なテスト結果を保証するために、ユニークな混合性能と優れた温度制御を組み合わせたものです。サンプルのミキシングとインキュベーションを同時に行うことによって、アッセイ結果を改善します。Eppendorf ThermoMixer Cは、すべての一般実験容器用のすばやく交換しやすいSmartBlocks、改良された新しいプログラム機能、あらゆる混合周波数に対する高度の安定性により、ユーザーを納得させます。あなたが使用できるアプリケーションの種類にはほとんど制限がありません！
Looking for a reliable lab partner for the years to come?
Eppendorf thermomixers are based on almost 80 years of experience developing shaking lab devices and thousands of labs worldwide using them. You'll find Eppendorf thermomixers still running strong after tireless performance over many years.
• Robust design and LCD display – ready for teaching labs and reliable operation
• Belt-less drive – no need for repeated and costly belt exchanges
• Easily run 10 years and longer with proper maintenance and service
• High-quality materials for high chemical resistance and corrosion resistance
• Serial number-specific temperature test certificate
• Block-specific calibration possible
• Technical and applicational support worldwide
• Made in Hamburg/Germany
Is your sample really mixed? – 2DMix-Control with 3 mm orbit up to 3,000 rpm
When mixing samples, we often just assume homogenization without verification, as checking is typically difficult. However, Eppendorf's decades of thermomixer development and customer feedback show that mixing performance can vary significantly with different parameters. The 2DMix-Control technology provides controlled, circular mixing with a 3 mm diameter and speeds up to 3,000 rpm. This is particularly beneficial for small tube or plate formats and challenging samples, where a large orbit and high RPM may be necessary (see link below).
Learn more: Influence of RPM and orbit on mixing results in 96- and 384-well plates
Fast temperature transfer for plates needed? – Form-fitting SmartBlocks
Have you measured your sample's temperature profile over time? You might be surprised by how much it can deviate from the setpoint and how long it can take to reach the target temperature – despite fast heating or cooling rates which always refer to the block and not the sample temperature.
The temperature profile of a sample is influenced by the heat transfer efficiency. For this reason, tube-specific thermoblocks contact all sides of the tube except the lid to enhance transfer efficiency. For plates, two thermoblock types exist: flat-bottom and form-fitting blocks akin to PCR cyclers.
Form-fitting blocks, like SmartBlocks for deep-well (96 well, 500 or 1000 µl) and PCR plates (96/384 well), enable rapid temperature transfer, ensuring the target temperature is reached quickly, even in short protocols (see exemplary comparison of thermal images after 5 min of incubation on the right).
Tip: If you are planning mixing tasks using DWP or PCR plates, measure the temperature profile, compare it with your target profile and consider form-fitting blocks.
Tool-, screw- and adjustment-free block exchange within seconds – Quick Release
You don't want to waste time struggling with tight and tiny screws, unplugging fragile cables, hunting for lost tools, or manually changing block settings? While many thermomixers claim "easy block exchange", the full process is usually never shown in videos – for good reasons.
Eppendorf's Quick Release function simplifies this: just press the lever to swap insulated SmartBlocks and the device automatically recognizes the new format. You're ready for new mixing tasks in seconds.
Tip: If you are planning to exchange thermoblocks regularly in your next mixer, check the operating manual or try the block exchange yourself for your next thermomixer. You would be surprised how easy or difficult it can be – depending on your choice.
Video: 1, 2, done - SmartBlock exchange within seconds
Consistent sample concentrations over time and comparability between samples in different block locations – ThermoTop heated lid
Condensation can form inside vessels depending on temperature, time, and RPM, leading to fluctuations in sample concentration. It also means the concentration may not even be stable over time as condensate droplets form and drip back into the sample. Complexity is added when comparing vessels or wells located centrally in the thermoblock with those at the periphery. Thus, condensation increases variance in experimental outcomes, necessitating more experiments to achieve statistical significance.
The optional ThermoTop heated lid offers block-type specific heating for SmartBlocks up to 2.0 mL, providing effective condensation protection without a need for manual adjustments and sample overheating. It ensures consistent sample concentrations over time and further improves comparability between samples in different block locations.
Tip: Consider a thermomixer with a heated lid with automatic block recognition and automatic temperature adjustment for low volume tubes or different plate formats. Manual height or temperature adjustment is not only time-consuming but may also lead to undetected overheating of samples.
Learn more: Condensation protection with the ThermoTop heated lid
Parallel incubation at a different temperature – SmartExtender
You want even more flexibility? How about a second incubation temperature or 50 % more capacity for incubating your 1.5 mL tubes?
The optional SmartExtender accommodates up to 12 x 1.5 mL tubes and is compatible with all Eppendorf SmartBlocks – for example for simultaneous enzymatic reactions at 37 °C or 95 °C. The independent heating function allows concurrent use with an Eppendorf SmartBlock, while preserving its heating, cooling, and mixing capabilities.
Easy tube transfer and synchronized start of reactions – Transfer Rack
Need a 60-second incubation for 24 samples tubes simultaneously? The Eppendorf Transfer Rack facilitates safe and easy transfer of up to 24 tubes in parallel to or from the Eppendorf SmartBlock, ensuring consistent reaction conditions for all samples. Compatible with SmartBlock sizes of 0.5 mL, 1.5 mL, and 2.0 mL, the Transfer Rack is included as standard. It holds up to 24 microtubes, allowing convenient transfer of hot vessels without risk of burns.
Tip: Use the Transfer Rack lid for quick inversion of all tubes or to ensure equal fit in the SmartBlock with a quick press.
More support for your PCR-workflow
In addition to form-fitting SmartBlocks for 96- and 384-well PCR plates and the ThermoTop® for efficient temperature transfer (see above), we offer additional accessories for your mixing tasks.
• Stackable PCR-Rack
• PCR-Cooler in pink or blue: Keeps a 96-well PCR plate cold for more than an hour at 0 °C (2 h precooling at -20 °C) and changes color when temperature exceeds 7 °C (see color change from bottom to top in the image on the right)
Want to speed up your tasks?
You don't want to spend your time navigating through programs or doing extensive thermomixer trainings for your new lab members?
Simply start one of the five pre-programmed protocols by the quick start keys or just define your own program (15 storable, freely definable, multi-parameter). The intuitive user interface supports you with five operational languages.
Supports your sustainability targets
Eppendorf is committed to accountability, consistency and transparency – the three principles of the ACT® label – to reduce its environmental impact and provide its customers with high-quality, sustainable products.
In addition to many other products Eppendorf offers, the sustainability score has been validated by the NGO My Green Lab® and the Eppendorf ThermoMixer® C has been certified with an ACT label.
Learn more: Sustainability aspects of the Eppendorf ThermoMixer C
不快な取り扱いに悩む？
人間工学は「人間工学的に設計された椅子」をはるかに超えています。 Eppendorf はすでに1970年代初頭にエルゴノミクスに関して研究室の装置を最適化し始めました。
2003年に、私達は私達のピペットのような人間工学的の液体処理装置に焦点を合わせて、PhysioCare Conceptを始めた。
今日では、Eppendorf PhysioCare Conceptはあなたのラボのワークフローをあなたの健康と幸福と調和させるための総合的な解決策としてさらなるラボ製品を含むように拡大されています。例えばEppendorf ThermoMixerの場合：
• Eppendorf QuickRelease簡単かつ高速なブロック交換のため
• 安全なグリップのための絶縁SmartBlock/指の火傷なし
• 便利な取り扱いのためのダイレクトキー
• あなたのベンチで直接腕の届くところに位置を可能にする小さい設置面積
• 直感的なデバイス操作のための標準化された»ユーザーインターフェースコンセプト«取り扱いが簡単なガイド付きソフトウェア
Eppendorf PhysioCare Conceptに関するさらに詳しい情報：
www.eppendorf.com/physiocare/
Be confident beyond your sample safety with VisioNize®
Lab Suite
Keep track of what matters most in your lab – anytime, anywhere. VisioNize Lab Suite provides a reliable digital monitoring solution for your laboratory equipment, helping you to increase sample security and compliance needs.
Monitor all key device parameters such as temperature, speed, and device interactions in real time. Stay informed about the status of your experiments and receive instant notifications via app, email, or SMS for important events – like program completion.
Easily export parameters and event data for documentation or analysis, supporting your compliance and research needs.
Experience peace of mind with continuous monitoring and real-time alerts.
Find out more about how VisioNize Lab Suite can support your lab's digital journey!
梱包材の廃棄
フリーザーの梱包材には、木製パレット、段ボール、プラスチック製のダストカバー、発泡パーツなど、さまざまな素材が使われています。材料のリサイクルは日々ますます重要になっています：ヨーロッパでは、ほとんどすべての段ボール材がリサイクルされていることをご存知ですか？当社のミキサーの包装用段ボール材の成分は、 60 %リサイクル材です。サーモミキサー段ボールの梱包材も収集し、組織の適切な収集コンテナーに廃棄することにより、貴重な原料をリサイクルするグローバルな持続可能性イニシアチブをサポートしてください。LD-PE 製のプラスチックダストカバーと発泡部品に関しては、PE材をリサイクルできる専用のリサイクルパートナーを選択することをお勧めします。利用可能なリサイクルオプションについては、地元の廃棄物処理業者または施設管理チームにお問い合わせいただくことをお勧めします。
装置の廃棄
弊社のミキサーーは何年も使用可能ですが、交換が必要になった場合には、地域の要件に従って廃棄するようお願いします。電子機器の経験を持つ、認定された地元のリサイクルパートナーを強くお勧めします。「地元」で処理することは輸送の負荷を軽減します。また、特殊なパーツを安全かつ持続的に除去およびリサイクルすることは、「認証」という点でも推奨されています。
汚染除去
この機器は、実験室で、そして/または生物学的な試料の取り扱いのために使用されました。処分すべき装置の汚染を適切に除去してください。地域の要件を確認してください。詳細については、地域のバイオセーフティ担当者や廃棄物担当者にお問い合わせください。地域のリサイクル業者に特別な指示や文書化要件があるか確認してください。Eppendorf汚染除去フォームシートをガイドとして使用できます。
